Home » ViewSonic Manuals » Projectors » ViewSonic PJD6211P » Manual Viewer

ViewSonic PJD6211P PJD6211P User Guide (English)

ViewSonic PJD6211P Manual

View all ViewSonic PJD6211P manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJD6211P manual content summary:

ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 1
ViewSonic® PJD6211P DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 2
24 Cleaning the Lens ...24 Cleaning the Projector Housing 24 Cleaning the Filter Cover 24 Replacing the Lamp 25 Specifications 27 Appendix ...28 LED Indicator Messages 28 Compatibility Modes 29 Troubleshooting ...31 RS-232 Command and Configuration 32 IR Control Code ...34 ViewSonic PJD6211P
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 3
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is Pb, then it means that the battery has a heavy metal content of ViewSonic PJD6211P 1
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 4
's instructions. replacement of the obsolete outlet. 10. Protect the power power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped. ViewSonic PJD6211P
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 5
: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic PJD6211P 3
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 6
product improvement, ViewSonic Corporation reserves the right to change product specifications without notice ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJD6211P ViewSonic DLP Projector VS13729 PJD6211P_UG_ENG Rev. 1A 07-19-10 The lamp
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 7
optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: „ Single chip 0.55" Texas Instruments DLP® technology „ XGA (1024 x 768 pixels) „ Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 8
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord Remote Control (IR) ViewSonic CD Wizard Optional accessories Quick Start Guide VGA Cable (D-SUB to D-SUB) Filter cover P/N: P4R34-4600-00 RS232 cable P/N: J2552-0208
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 9
Projector Overview Front View 12 11 10 9 8 1 23 45 6 7 1 Lens cap 2 Elevator button 3 Lens cap strap 4 Projection lens 5 Front IR remote control sensor 6 Ventilation holes (intake) 7 Filter cover 8 Speaker 9 Focus ring 10 Zoom ring 11 Control panel 12 Lamp cover ViewSonic PJD6211P 7
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 10
Connection ports 2 AC power socket 23 Kensington lock 4 Rear IR remote control sensor 5 Ventilation holes (exhaust) 6 Security bar Bottom View 1 2 1 Ceiling mount holes (M4*6) 2 Tilt-adjustment feet „ This projector can be used with a ceiling mount for support. The ceiling mount is not included in
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 11
directional buttons to select items or make adjustments to your selection. 6 ENTER Enter to sub-menu and confirm the menu selection. 7 SOURCE Manually select an input source. 8 MENU/EXIT Display or exit the on-screen display menus. 9 Power Turn the projector on or off. ViewSonic PJD6211P 9
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 12
. 3 MONITOR OUT Connect support. 7 RS-232 When operating the projector via a computer, connect this to the controlling computer's RS-232C port. 8 AUDIO IN Connect an audio output from video equipment to this jack. 9 AUDIO OUT Connect to a speaker or other audio input equipment. ViewSonic PJD6211P
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 13
Remote Control 1 POWER Turn the projector on or off. 2 Four directional buttons Use four directional buttons to select items or make adjustments to your selection. 3 MENU Display or exit the on-
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 14
remote control until you feel a click. Caution „ Risk of explosion if battery is replaced by an incorrect type. „ Dispose of used batteries according to the instructions replace a new battery. If the leakage adheres to your body or clothes, rinse well with water immediately. ViewSonic PJD6211P 12
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 15
the remote sensor is visible. „ Do not drop the remote control or jolt it. „ Keep the remote control out of locations with excessively high temperature or humidity. „ Do not get water on the remote control or place wet objects on it. „ Do not disassemble the remote control. ViewSonic PJD6211P 13
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 16
Installation Connecting the Projector 1 2 3 4 2 5 6 7 1 1 1 Audio Cable 2 VGA Cable (D-Sub to D-Sub) 3 RS-232 Cable 4 USB . „ The cables that come with the projector may differ from the above illustration. The included cables are based on actual shipment delivery. ViewSonic PJD6211P 14
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 17
projector has completed the cooling cycle and has entered stand-by mode. Once in stand- by mode, simply press button to restart the projector. 3. Disconnect the AC power cord from the electrical outlet and the projector. 4. Do not turn on the projector right after power off. ViewSonic PJD6211P
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 18
foot are fully retracted before placing the projector in its carrying case. Adjusting the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust the image by sliding the zoom ring. ViewSonic PJD6211P 16
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 19
100 120 150 200 250 300 4 : 3 Screen projector. „ Do not use the projector in a smoky environment. Smoke residue may build- up on critical parts and damage the projector or its performance. „ Consult with your dealer for special installation such as suspending from a ceiling. ViewSonic PJD6211P
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 20
Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. 㕐㕐 ViewSonic PJD6211P 18
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 21
1 Adjustable range and default setting vary depending on signal type. 2 This function is only available when the projector is installed an optional filter cover. ViewSonic PJD6211P 19
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 22
user's settings. „ White Board : For white projection screen type. „ Black Board : For black projection screen type. „ Green Board: For green projection screen type. „ Brightest : For a daylight environment. White Intensity Increase the brightness of white areas. ViewSonic PJD6211P 20
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 23
. Setting (Computer / Video Mode) Menu Position Choose the menu location on the display screen. Projection Adjust the picture to match the orientation of the projector: upright or upside-down, in front of or behind the screen. Invert or reverse the image accordingly. ViewSonic PJD6211P 21
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 24
for a specific period of time, projector will automatically turn off. Auto Source Automatically scan through all the input source. ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. „ This function will be unavailable
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 25
projector is powered on or when no signal is input. "User" is the screen that you captured. Zoom Zoom in and out the images. DCR (Dynamic Contrast Ratio) Enable DCR will turn Off for most video sources and On for most computer sources. Green Mode Enable this function when power ViewSonic PJD6211P 23
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 26
other office equipment. „ If the filter cover is torn, replace it. 4. Replace the filter cover. 5. Attach the filter cover. 6. Plug the power back into the projector. „ Turn off the projector and remove the AC power cord from the power outlet before beginning maintenance work. „ Make sure the lens
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 27
the lamp bursts, the mercury inside the lamp will be exposed. Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user's health. ViewSonic PJD6211P 25
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 28
of glass, do not drop the unit and do not scratch the glass. „ Do not reuse the old lamp. This could cause the lamp to explode. „ Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. „ Do not use the projector with the lamp cover removed. ViewSonic PJD6211P 26
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 29
Specifications Display system Single 0.55" DLP panel Resolution XGA (1024 × 768) Zoom 1.1X F/No. 2.51 - 2.69 Focal length 21.95 - 24.18mm Screen size 27" - 300" Lamp 180W Input terminal D-Sub 15-pin x 2, S-VIDEO x 1, VIDEO x 1, Audio signal input (3.5 mm stereo mini jack) x 1
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 30
turn the power off before the Lamp LED changes to flashing. The fan motor will turn off when the lamp has cooled. Temperature is too high. The lamp will turn off. The fan motor is cooling the lamp. The lamp ignition failed. If temperature is too high, the fans will cool the lamp. ViewSonic PJD6211P
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 31
SVGA 640 x 480 @ 120Hz 720 x 400 800 x 600 XGA 800 x 600 @ 120Hz 1024 x 768 SXGA 1024 x 768 @ 120Hz 1152 x 864 1280 x 960 1280 x 1024 1280 x 960 1280 x 1024 1440 x 1080 1600 x 1200 H-Sync [KHz] 24.6 31 .0 120.0 120.0 75.0 60.0 85.0 60.0 75.0 60.0 75.0 60.0 75.0 60.0 60.0 ViewSonic PJD6211P 29
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 32
Video: Signal 1080i 1080i 1080p 1080p 720p 720p 576p 576i 480p 480i Horizontal Frequency (kHz) 33.8 28.1 67.5 56.3 45.0 37.5 31.3 15.8 31.5 15.8 Vertical Frequency (Hz) 60.0 50.0 60.0 50.0 60.0 50.0 50.0 50.0 60.0 60.0 ViewSonic PJD6211P 30
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 33
on the front of the projector. Use the remote control within the effective range. „ Aim the remote control at the screen or at the front or back of the projector. „ Move the remote control so it is more directly in front of or behind the projector and not as far to the side. ViewSonic PJD6211P 31
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 34
Stop Bit:1 Assign Port:COM1 Name Operation CRC type Power ON OFF BE, EF, 10, 05, 00 DA, 89, DB, 58, DA, 57, D0, 86, D1, DF, DF, 3D, DE, 10, DB, 23, DB, F2, DA, 0D, DA, 6B, DA, Lamp Hour 70, 00, 00, 00, 00, 00 Version 71, 00, 00, 00, 00, 00 03:Projector ON (Normal Mode) ViewSonic PJD6211P 32
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 35
D-Sub 9 pin 1 1 CD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Wire List C1 COLOR 1 Black 2 Brown 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 8 Purple 9 White SHELL DW C2 1 2 3 4 5 6 7 8 9 SHELL ViewSonic PJD6211P 33
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 36
IR Control Code Key Power Source Up Down Left Right MENU Auto Mouse ViewMatch Freeze Enter / Mouse Left Exit / Mouse Right KeyS+ KeySDigital Zoom+ Digital ZoomVolume+ VolumeMute Blank Format NEC 83 F4 13 Byte4 87 02 82 85 83 81 84 64 6B 63 80 8c 8d 86 8a 68 6a 88 89 8b 8f ViewSonic PJD6211P 34
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 37
@ap.viewsonic.com United Kingdom www.viewsoniceurope.com/uk/ www.viewsoniceurope.com/uk/ support/call-desk/ [email protected] United States www.viewsonic.com T (Toll-Free)= 1-800-688-6688 T (Toll)= 1-424-233-2530 [email protected] F= 1-909-468-3757 ViewSonic PJD6211P
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 38
follow instructions supplied with the product. b. Operation outside of product specifications. c. ViewSonic. e. Any damage of the product due to shipment. f. Removal or installation of the product. g. Causes external to the product, such as electric power fluctuations or failure. ViewSonic PJD6211P
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 39
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card. For users in Europe and Russia, full details of warranty provided can be found in www.viewsoniceurope. com under Support/Warranty Information. 4.3: Projector Warranty ViewSonic PJD6211P PRJ_LW01 Rev. 1h 06-25-07 37
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 40
repair, or failure to follow instructions supplied with the product. b. Any damage of the product due to shipment. c. Causes external to the product, such as electrical power fluctuations or failure. d. Use of supplies or parts not meeting ViewSonic's specifications. e. Normal wear and tear
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 41
(Grupo Sesicomp) Global Product Services Progreso #6-A, Colo Centro Mar Mail. [email protected] Tijuana: FOR USA SUPPORT: STD ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 viewsonic.com 4.3: ViewSonic Mexico Limited Warranty PRJ_LW03 Rev. 1A 06-25-07 ViewSonic PJD6211P 39
ViewSonic PJD6211P | PJD6211P User Guide (English) - Page 42

Section	Page
PJD6211P_UG_ENG.pdf	7
Projector Features	7
Package Contents	8
Projector with Lens Cap	8
AC Power Cord	8
VGA Cable (D-SUB to D-SUB)	8
Projector Overview	9
Using the Product	11
Control Panel	11
Connection Ports	12
Remote Control	13
Replacing the Battery	14
1. Push the catch to the left and remove the battery holder.	14
2. Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with the mark “+” is up.	14
3. Push the battery holder back into the remote control until you feel a click.	14
Remote Control Operation	15
Installation	16
Connecting the Projector	16
Powering On/Off the Projector	17
Powering On the Projector:	17
1. Remove the projector lens cap.	17
2. Complete the AC power cord and peripheral signal cable(s) connections.	17
3. Press button to turn on the projector. The projector takes a minute or so to warm up.	17
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.	17
Powering Off the Projector:	17
1. Press button to turn off the projector lamp. You will see a message \	17
2. Press button again to confirm.	17
3. Disconnect the AC power cord from the electrical outlet and the projector.	17
4. Do not turn on the projector right after power off.	17
Adjusting the Projector	18
Adjusting the Projector Height	18
1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment.	18
2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.	18
Adjusting the Projector Zoom and Focus	18
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.	18
2. Adjust the image by sliding the zoom ring.	18
Adjusting Projection Image Size	19
Menu Operation	20
1. Press the MENU button to open the OSD menu.	22
2. When OSD is displayed, use p / q to select any feature in the main menu.	22
3. After selecting the desired main menu item, press u to enter sub-menu for feature setting.	22
4. Use p / q to select the desired item and adjust the settings with t / u.	22
5. Press the MENU button, the screen will return to the main menu.	22
6. To exit OSD, Press the MENU button again. The OSD menu will close and the projector will automatically save the new settings.	22
Maintenance	26
Cleaning the Lens	26
Cleaning the Projector Housing	26
Cleaning the Filter Cover	26
1. Switch the projector off and unplug the AC power cord from the wall socket.	26
2. Remove the filter cover as the illustration shown.	26
3. Clean the filter cover.	26
4. Replace the filter cover.	26
5. Attach the filter cover.	26
6. Plug the power back into the projector.	26
Replacing the Lamp	27
1. Turn off the projector.	28
2. If the projector is installed in a ceiling mount, remove it	28
3. Unplug the power cord.	28
4. Loosen the screw in the side of the lamp cover and remove the cover.	28
5. Remove the screws from the lamp module, raise the handle, and lift out the module.	28
6. Insert the new lamp module into the projector and tighten the screws.	28
7. Replace the lamp cover and tighten the screw.	28
8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.	28
9. Reset the lamp hour. Refer to the “Setting” menu.	28
Specifications	29
Appendix	30
LED Indicator Messages	30
Compatibility Modes	31
Computer:	31
Video:	32
Troubleshooting	33
Start-up problems	33
Image problems	33
RS-232 Command and Configuration	34