Home » ViewSonic Manuals » Projectors » ViewSonic PJD6230 » Manual Viewer

ViewSonic PJD6230 User Guide

ViewSonic PJD6230 - XGA DLP Projector Manual

UPC - 766907322828

View all ViewSonic PJD6230 manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJD6230 manual content summary:

ViewSonic PJD6230 | User Guide - Page 1
ViewSonic® PJD6220/PJD6230/PJD6240 DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your
ViewSonic PJD6230 | User Guide - Page 2
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. rique de la classe B est conforme à la norme NMB-003 du Canada. CE Conformity for European Countries The device complies with the requirements of ViewSonic PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 3
guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions an electrician for replacement of the Refer all servicing to qualified service personnel. Servicing is required ViewSonic ii PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 4
below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead and as a cooper alloy containing up to 4% lead by weight. ViewSonic iii PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 5
Name: Model Number: Document Number: Serial Number: Purchase Date: For Your Records PJD6220/PJD6230/PJD6240 ViewSonic DLP Projector VS11949/VS11986/VS11990 PJD6220_PJD6230_PJD6240_UG_ENG Rev. 1B 08-19-08 The lamp in this product contains mercury. Please dispose of in accordance with local, state
ViewSonic PJD6230 | User Guide - Page 6
supplied AC Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet fits the plug to prevent signal interference due to voltage fluctuations. Ground ViewSonic v PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 7
14 Network Control 19 Maintenance 30 Cleaning the Lens ...30 Cleaning the Projector Housing 30 Replacing the Lamp 31 Specifications 33 Appendix 34 LED Indicator Messages 34 RS-232 Command and Configuration 35 Compatibility Modes 40 Troubleshooting ...41 ViewSonic PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 8
high reliability and ease of use. The projector offers the following features: „ Single chip 0.55" Texas Instruments DLP® technology „ XGA (1024 x 768 pixels correction „ Network function for remote management „ Closed Captioning included * means compressed. ViewSonic 1 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 9
D-SUB) Composite Video Cable S-Video Cable Remote Control (IR) AAA size batteries for remote control User's Manual Quick Start Guide Projector Carrying Case VGA Component Adapter „ Save the „ Accessories and components may vary by retailer and region. ViewSonic 2 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 10
Projector Overview Front View 12 11 10 9 8 7 1 2 3 45 6 1 Lens cap 2 Elevator button 3 Lens cap strap 4 Projection lens 5 Front IR remote control sensor 6 Ventilation holes 7 AC power socket 8 Speaker 9 Control panel 10 Zoom ring 11 Focus ring 12 Lamp cover ViewSonic 3 PJD6220/PJD6230/
ViewSonic PJD6230 | User Guide - Page 11
lock 3 Rear IR remote control sensor 4 Ventilation holes Bottom View 1 2 3 1 Elevator foot 2 Ceiling mount (M4 x L7.5mm) 3 Tilt-adjustment foot „ This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. ViewSonic 4 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 12
Lamp Counter Reset and Factory Default menu operations. 5 Resync Resynchronize the projector to the input signal from a computer. 6 Power Turn the projector on or off. 7 Menu Display or exit the on-screen display menus. 8 Source Manually select an input source. ViewSonic 5 PJD6220/PJD6230
ViewSonic PJD6230 | User Guide - Page 13
input signal (analog RGB or component) to this jack. 67 RS-232 When operating the projector via a computer, connect this to the controlling computer's RS-232C port. 78 S-Video Connect equipment to this jack. 190 SERVICE This connector is for firmware update. ViewSonic 6 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 14
4 Aim the remote at the viewing 5 screen, press projector is only available connected to a wcohmenputtheer via a USB cable. 10 Enter Confirm the selection. 11 Freeze Press "Freeze" to pause the screen image. Press again to cancel the Freeze function. ViewSonic 7 11 10 9 8 PJD6220/PJD6230
ViewSonic PJD6230 | User Guide - Page 15
of the used batteries along with household waste. Dispose of used batteries according to local regulations. „ Danger of explosion may happen if batteries are incorrectly replaced. Replace only with the same type recommended by the manufacturer. ViewSonic 8 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 16
is visible. „ Do not drop the remote control or jolt it. „ Keep the remote control out of locations with excessively high temperature or humidity. „ Do not get water on the remote control or place wet objects on it. „ Do not disassemble the remote control. ViewSonic 9 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 17
above is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. „ The cables that come with the projector may differ from the above illustration. The included cables are based on actual shipment delivery. ViewSonic 10 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 18
lens. Powering Off the Projector: 1. Press button to turn off the projector lamp. You will see a projector. 3. Disconnect the AC power cord from the electrical outlet and the projector. 4. Do not turn on the projector immediately following a power off procedure. ViewSonic 11 PJD6220/PJD6230
ViewSonic PJD6230 | User Guide - Page 19
retracted before placing the projector in its carrying case. Adjusting the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust the image by sliding the zoom ring. ViewSonic 12 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 20
; other positions can cause heat build-up and damage to the projector. „ Make sure the heat ventilation holes are not blocked. „ Do not use the projector in a smoky environment. Smoke residue may cause build-up on critical parts (i.e. DMD, lens assembly, etc.) ViewSonic 13 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 21
Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. ViewSonic 14 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 22
button on the control panel or the MENU button on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Picture (Computer / Video screen type. White Intensity Increase the brightness of white areas. ViewSonic 15 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 23
location on the display screen. Projection Adjust the picture to match the orientation of the projector: upright or upside-down, in front of or behind the screen. Invert or reverse is accurately transmitted. „ YCbCr : For component 480i,576i signals. ViewSonic 16 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 24
projector lamp light output which will lower power consumption and increase lamp life. High Altitude Turning on High Altitude mode operates the fans at full speed continuously to allow for proper high altitude cooling of the projector up screen when the projector is powered on or impact lamp life
ViewSonic PJD6230 | User Guide - Page 25
. Gateway Select the default gateway of the network connected to the projector. Language (Computer / Video Mode) Select the language used by the on-screen menu. Factory Default (Computer / Video Mode) Restore all menu settings to factory default settings. ViewSonic 18 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 26
Network Control This feature provides the ability to remotely control and manage the projector through the network. Note: 1024x768 viewing resolution is recommended. Preparation: 1. Connect one end of the internet cable to the LAN connector on projector. 2. Connect the other end of the internet
ViewSonic PJD6230 | User Guide - Page 27
address on your computer, and click OK. ● Click "Use the following IP address" ● IP address: 10.0.50.105, (set the last number different to the projector IP address). ● Subnet mask: 255.255.0.0 ViewSonic 20 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 28
projector status and network configuration settings. Date & Time setting by user. Control the projector via network. Network configuration & Password setup. Show and setup Alert configurations. Show and setup Scheduling configurations. Administrator √ User √ ViewSonic 21 PJD6220/PJD6230
ViewSonic PJD6230 | User Guide - Page 29
disabled, it will directly go into the Status page. If the Administrative & User password is enabled Select your User Name and enter password to login. ViewSonic 22 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 30
projector. Show time set on current projector. * when system status shows "Inactive", it could either mean the projector is "Power Off", or projector's network control is set to be RS232 (Please refer to Network Control, Page 18 to link with the project). ViewSonic 23 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 31
ViewSonic Description Update date setting on the projector. Update time setting on the projector. Click "Enter" button to save the settings. Show projector name on the current projector. Power On or Power Off the projector position. Adjusts the vertical position. 24 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 32
setting. Selects the closed caption setting. Enable or disable blank function. ■ If the adjustment did not display properly. Please "refresh" or "reload" the browser again. ViewSonic 25 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 33
Network DHCP Assign an IP address to the projector from the DHCP server automatically. Manual Assign an IP address manually. IP Address Setup IP address when DHCP is the settings. ■ If password is lost, please contact local ViewSonic customer support. ViewSonic 26 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 34
The cooling fan is not operating. Over Temperature The projector internal is over heated. Lamp Fail The lamp does not light up. Lamp Time Alert Lamp is approaching the end of its useful life in full power operation. Replacement is suggested. Schedule Excution Error Schedule Excution Error
ViewSonic PJD6230 | User Guide - Page 35
"Cancel". Specific Day: defines the month and day that will execute the command. Click "Submit" button to create new schedule. To delete schedule, click "Cancel". ViewSonic 28 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 36
Logout: ViewSonic 29 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 37
quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. Warning: Never open any sprays. „ Use a soft cloth or lens paper only. ViewSonic 30 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 38
displayed. Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement. „ The lamp becomes high temperature after turning off the projector with the power button. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least
ViewSonic PJD6230 | User Guide - Page 39
drop the unit and do not scratch the glass. „ Do not reuse the old lamp. This could cause the lamp to explode. „ Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. „ Do not use the projector with the lamp cover removed. ViewSonic 32 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 40
Display Type Single 0.55" DLP panel Resolution (Pixels) XGA (1024 × 768) Lens Manual Zoom (1.1x) Screen Size 30" - 250" Lamp PJD6220: 180W; PJD6230: 200W; PJD6240: 260W Input and Specifications are subject to change without prior notice. ViewSonic 33 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 41
Solid Solid Solid Solid Solid Solid Flash Solid - Meaning The projector is in standby mode. The projector system has some problems with its fan, so the projector cannot start up. The lamp is in good condition and is projecting at maximum brightness. The lamp has reached its end of life and must be
ViewSonic PJD6230 | User Guide - Page 42
RS-232 Command and Configuration RS232 Serial Remote Control Command Item Description Baud Rate 19200 Parity Bit none Data Bit 8 Stop Bit 1 Assign Port COM1 Send String BE, EF, 02, 06, 00, 6D, D2, 34, 00, 00, 00, 00, 00 Response 06 Comment ViewSonic 35 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 43
DF, 66, 00, 00, 00, 00, 00 Response 06 Comment Keystone Command Send String BE, EF, 02, 06, 00, 3D, DE, 64, 00, 00, 00, 00, 00 Response 06 Comment Keystone Up Command Send String BE, EF, 03, 06 , F2, DA, 67, 00, 00, 00, 00, 00 Response 6 Comment ViewSonic 36 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 44
, 00 Response 06 Comment Factory Reset Command Send String BE, EF, 03, 06, 00, 6B, DA, 6E, 00, 00, 00, 00, 00 Response 06 Comment Lamp Hour Command Send String BE, EF, 03, 06, 00, BA, DB, 6F, 00, 00, 00, 00, 00 Response Lamp Hour Comment ViewSonic 37 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 45
Command Send String BE, EF, 03, 06, 00, 04, D8, 71, 00, 00, 00, 00, 00 Response 03 :Projector ON (Normal Mode) Comment Volume Command Send String BE, EF, 02, 06, 00, F8, DC, 71, 00, 00, 00 , 00, 89, E8, 01, 47, 02, CC, CC, 00 Response 06 Comment ViewSonic 38 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 46
Change to HDTV(Y-Pb-Pr) Channel Command are the same as that of Change to Computer1 (Analog RGB) Channel Command. CTSZ RSTZ TXD RXD GND ViewSonic 39 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 47
37.5 kHz 33.8 kHz 28.1 kHz Vertical Frequency (Hz) 60 Hz 60 Hz 50 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz ViewSonic 40 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 48
the projector. Use the remote control within the effective range. „ Aim the remote control at the screen or at the front or back of the projector. „ Move the remote control so it is more directly in front of or behind the projector and not as far to the side. ViewSonic 41 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 49
.com/uk/Support/Calldesk.htm United Kingdom United States www.viewsoniceurope.com/uk/ www.viewsonic.com www.viewsoniceurope.com/uk/Support/Calldesk.htm T (Toll-Free)= 1-800-688-6688 T (Toll)= 1-424-233-2530 F= 1-909-468-1202 [email protected] ViewSonic 42 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 50
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem
ViewSonic PJD6230 | User Guide - Page 51
and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. .com under Support/Warranty Information. 4.3: Projector Warranty ViewSonic PRJ_LW01 Rev. 1h 06-25-07 44 PJD6220/PJD6230/PJD6240
ViewSonic PJD6230 | User Guide - Page 52
period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product's serial number
ViewSonic PJD6230 | User Guide - Page 53
Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic Services USA SUPPORT: ViewSonic
ViewSonic PJD6230 | User Guide - Page 54

Section	Page
PJD6220_Contents_Eng.pdf	8
Projector Features	8
Package Contents	9
Projector with Lens Cap	9
AC Power Cord	9
VGA Cable (D-SUB to D-SUB)	9
Quick Start Guide	9
VGA - Component Adapter	9
Projector Overview	10
Using the Product	12
Control Panel	12
Connection Ports	13
Remote Control	14
Installing the Batteries	15
1. Open the battery cover in the direction shown.	15
2. Install batteries as indicated by the diagram Inside the compartment.	15
3. Close the battery cover into position.	15
Remote Control Operation	16
Installation	17
Connecting the Projector	17
Powering On/Off the Projector	18
Powering On the Projector:	18
1. Remove the projector lens cap.	18
2. Complete the AC power cord and peripheral signal cable(s) connections.	18
3. Press button to turn on the projector. The projector takes a minute or so to warm up.	18
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.	18
Powering Off the Projector:	18
1. Press button to turn off the projector lamp. You will see a message \	18
2. Press button again to confirm.	18
3. Disconnect the AC power cord from the electrical outlet and the projector.	18
4. Do not turn on the projector immediately following a power off procedure.	18
Adjusting the Projector	19
Adjusting the Projector Height	19
1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment.	19
2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.	19
Adjusting the Projector Zoom and Focus	19
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.	19
2. Adjust the image by sliding the zoom ring.	19
Adjusting Projection Image Size	20
Menu Operation	21
1. Press the Menu button on the control panel or the MENU button on the remote control to open the OSD menu.	22
2. When OSD is displayed, use p / q to select any feature in the main menu.	22
3. After selecting the desired main menu feature, press u to enter sub-menu for feature setting.	22
4. Adjust the settings with t / u.	22
5. Press the Menu buttonon the control panel or the MENU button on the remote control, the screen will return to the main menu.	22
6. To exit OSD, press the Menu button on the control panel or the MENU button on the remote control again. The OSD menu will close and the projector will automatically save the new settings.	22
Maintenance	37
Cleaning the Lens	37
Cleaning the Projector Housing	37
Replacing the Lamp	38
1. Turn off the projector.	39
2. If the projector is installed in a ceiling mount, remove it from the mount.	39
3. Unplug the power cord.	39
4. Loosen the screw in the side of the lamp cover and remove the cover.	39
5. Remove the screws from the lamp module, raise the handle, and lift out the module.	39
6. Insert the new lamp module into the projector and tighten the screws.	39
7. Replace the lamp cover and tighten the screw.	39
8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.	39
9. Reset the lamp hour. Refer to the “Setting” menu.	39
Specifications	40
Appendix	41
LED Indicator Messages	41
Compatibility Modes	47
Computer:	47
Video:	47
Troubleshooting	48
Start-up problems	48