ViewSonic PJD6683ws PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ
ViewSonic PJD6683ws Manual
View all ViewSonic PJD6683ws manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJD6683ws manual content summary:
- ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 1
PJD6553w_PJD6653w_ PJD6683w DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 2
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is compliance could void your authority to operate the equipment. For Canada CE Conformity for European Countries Following information is only for EU - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. manufacturer's instructions. blades and a third grounding prong. The wide blade and the third prong are provided for replacement of the obsolete outlet. power outlet is located near the unit so that it is easily - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 4
Declaration of RoHS Compliance Substance Proposed Maximum Concentration Actual Concentration Cadmium (Cd) ) Polybrominated biphenyls (PBB) as noted below: iii - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 5
ViewSonic DLP Projector VS14295/VS14551/VS14552/VS14191/VS14193/ VS14555/VS14553/ VS14195/VS14554/VS14550 PJD5126/PJD5226/PJD5226w/PJD6223/PJD6253/PJD6353/PJD6383/ PJD6553w/PJD6653w/PJD6683w_UG_ENG Rev. 1B 01-05-12 Product disposal at end of product life The lamp - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 6
in standby mode. 45 Shutting down the projector 45 Menu operation 46 Maintenance 56 Care of the projector 56 Lamp information 57 Troubleshooting 63 Specifications 64 Projector specifications 64 Dimensions 66 Ceiling mount installation 66 Timing chart 67 Copyright information...69 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 7
the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 4. Always open - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 8
transporting or installation. It should be used with a commercially available theft prevention cable. Safety instructions for ceiling mounting of the projector We want you to have a pleasant experience using your projector, so we need to bring this safety matter to your attention to prevent damage - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 9
projector offers the following features. • Dynamic PC and Dynamic Movie function adjusting the power consumption of the lamp lamp by up to 70% when no input signal can be detected for a set period of time. • Presentation timer for better control of time during presentations • Support 3D DLP - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 10
/PJD6553w PJD6653w/PJD6683w Projector Power Cord VGA Cable PJD5126/PJD5226/ PJD5226w/PJD6223/ PJD6353/PJD6653w PJD6253/PJD6383/ PJD6553w/PJD6683w Multi-language user manual DVD Optional accessories 1. Replacement lamp 2. Soft carry case 3. VGA-Component adapter Quick Start Guide Remote - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 11
Projector exterior view Front/upper side PJD5126/PJD5226/PJD5226w/ PJD6223/PJD6253/PJD6553w 1 2 5 3 4 6 7 PJD6353/PJD6383/ PJD6653w/PJD6683w 1 2 5 PJD6653w/PJD6553w/PJD6683w 8 9 10 11 12 13 14 15 16 1. External control panel (See "Projector" on page 7 for details.) 2. Lamp cover 3. - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 12
indicator light 4. Left/Blank Indicates the status of the lamp. Lights up Hides the screen picture. or flashes when the lamp has developed a 5. POWER indicator light problem. Lights up or flashes when the projector is 11. AUTO under operation. Automatically determines the best picture II - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 13
PJD5226w/PJD6223/ PJD6353/PJD6653w PJD6253/PJD6383/ PJD6553w/PJD6683w 1 18 1 25 2 2 3 3 the selected On-Screen Display Toggles the projector between standby (OSD) menu item. mode Switches between the normal and mouse modes. Manually corrects distorted images resulting from an angled - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 14
pattern. 16. Blank Hides the screen picture. 17. DynamicEco™ Decreases the power consumption of the lamp by up to 70%. 21. Volume keys (+, -) Magnifies or reduces the volume level. 22. Toggles the projector audio between on and off. 23. Color Mode Selects an available picture setup mode. 24. Timer - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 15
and PgDn buttons on the remote control together for 5 seconds or more. The initial code is set to A. If different codes are set on the projector and remote control, there will be no response from the remote control. When that happens, switch the code for the remote control again. Using the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 16
Replacing the remote control batteries 1. To open the battery cover, turn the remote control over to view its back, push on . • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 17
the screen. Purchase the projector ceiling mount kit from your dealer to mount your projector on the ceiling. Set Front Ceiling in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on. 3. Rear Ceiling Select this location with the projector suspended upside-down from the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 18
page 66 for the center of lens dimensions of this projector before calculating the appropriate position. The "screen" mentioned below refers to the projection screen usually consisting of a surface and a support structure PJD5126/PJD5226/PJD6223/PJD6253/PJD6353/ PJD6383 • 4:3 image on a 4:3 screen - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 19
PJD6253 (a) Screen Size [inch (m)] 4:3 image on a 4:3 Screen (b) Projection (c) Image (d) Vertical distance [m (inch)] height offset min. max. [cm (inch)] [cm (inch)] 16:9 image on a 4:3 Screen (b) Projection distance (c) Image (d) Vertical [m (inch)] height offset min. max. [cm (inch - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 20
PJD5226w/PJD6553w/PJD6653w/PJD6683w • 16:10 image on a 16:10 screen (b) (a) (d) (c) (f) (e) (a) (e) (f) (c) (d) (b) • 16:10 image on a 4:3 screen (b) (a) (d) (e): Screen (c) (f) (e) (f): Center of lens (a) (e) (f) (c) (d) (b) PJD5226w (a) Screen Size [inch (m)] 16:10 image on a 16: - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 21
7.40 (363) 9.62 (379) 381 (150) 38.1 (15.0) PJD6653w/PJD6683w (a) Screen Size [inch (m)] 16:10 image on a 16:10 Screen 16:10 projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 22
connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 5). They are commercially available USB RS-232 PJD6553w/PJD6653w/ LAN MONITOR OUT COMPUTER IN 1 2 PJD6683w COMPUTER IN 2 Audio out PJD5126/PJD5226/ PJD5226w TYPE B USB MONITOR - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 23
a monitor If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below: To connect the projector to a monitor: 1. Connect the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 24
is equipped with a HDMI socket, you can enjoy uncompressed digital video quality. See "Connecting an HDMI device" on page 20 for how to connect the projector to a HDMI source device and other details. If no HDMI source is available, the next best video signal is Component video (not to be confused - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 25
projector. The audio output is a mixed mono signal and controlled by the projector projector. • In the unlikely event that you connect the projector to a DVD player via the projector • The projector is only connect the projector to a on the projector. • The projector is only the projector is - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 26
the composite Video output socket of the Video source device. 2. Connect the other end of the Video cable to the VIDEO socket on the projector. • The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See "Connecting audio" on page 19 for details. • If - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 27
90 seconds before energizing the lamp. • To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before turning it off. 3. If the projector is activated for the first time, select your OSD language following the on-screen instructions. 4. Switch all of the connected - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 28
Timer Controller Splash Screen Screen Capture Message LAN Control Settings Analog RGB English Front Table Disable Disable Off Disable ViewSonic On MENU Exit 4. Press MENU/EXIT twice* on the projector or Exit on the remote control to leave and save the settings. *The first press leads you back to - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 29
cannot be used unless the correct password is entered every time the projector is started. • The digits being input will be displayed as asterisks on-screen. Write your selected password down here in this user manual in advance or right after the password is entered so that it is available to - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 30
on the screen. RECALL PASSWORD Please write down the recall code, and contact ViewSonic Customer Center. 2. Write down the number and turn off your projector. Recall code: 0 2 1 2 3. Seek help from the local service center to decode MENU Exit the number. You may be required to provide proof - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 31
error message is displayed lasting for three seconds, and the message 'INPUT PASSWORD' is displayed for your retry. You can press MENU/EXIT on the projector or Exit on the remote control to cancel the change or try another password. Though the password function is disabled, you need to keep the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 32
SOURCE menu is On if you want the projector to automatically search for the signals. You can also manually select the desired signal by pressing one of Sub / Comp. 2 Video S-Video PJD6223/PJD6253/PJD6353/ PJD6383/PJD6553w/ PJD6653w/PJD6683w D-Sub / Comp. 1 D-Sub / Comp. 2 HDMI Video S-Video - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 33
projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" on page 29 for details. • Do not look into the lens while the lamp is on. The strong light from the lamp /PJD6553w PJD6353/PJD6383/ PJD6653w/PJD6683w 28 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 34
image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 35
in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal. To change the projected image ratio - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 36
black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the without aspect alteration. 16:9 picture 4. 16:10 (PJD5226w/PJD6553w/PJD6653w/ PJD6683w only): Scales an image so that it is displayed in the center of - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 37
appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment. In addition, the projector will optimize the image quality using the dynamic Movie function in accordance with the projected contents. It - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 38
room environment. 5. Dynamic Movie mode: Is suitable for enjoying dark movies or DVD movies best viewed in a blackened (little light) home cinema or lounge room environment. In addition, the projector will optimize the image quality using the dynamic Movie function in accordance with the projected - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 39
previously adjusted the Brightness setting to suit your selected input and viewing environment. -30 0 +30 Adjusting Color Highlight the PICTURE tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 40
it. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc., you can project any image from the disc on the screen and enter the Color Management menu to make adjustments. To adjust the settings - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 41
timer, press and press / to highlight Start Counting and press MODE/ENTER. 8. A confirmation message displays. Highlight Yes and press MODE/ENTER on the projector or remote control to confirm. You will see the message "Timer is On" displaying on the screen. The timer starts counting when the timer - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 42
the image. The word 'FREEZE' will be displayed in the upper left corner of the screen. To release the function, press any key on the projector or remote control. Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 43
your own startup screen This function is only available for the PJD6223/PJD6253/PJD6353/PJD6383/PJD6553w/ PJD6653w/PJD6683w series. In addition to selecting the projector preset startup screen from among ViewSonic logo, Black or Blue screen, you can make your own startup screen that is a picture - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 44
This function is only available for the PJD6223/PJD6253/PJD6353/PJD6383/PJD6553w/ PJD6653w/PJD6683w series. The projector supports Crestron® software. With correct settings for the LAN Control Settings menu, you can manage the projector from a computer using a web browser when the computer and the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 45
using Microsoft Internet Explorer, make sure it is version 7.0 or higher. • The screen shots in this manual are for reference only, and may differ from the actual design. 1. Enter the address of the projector in the address bar of your browser and press Enter. 2. The main page of the Network Control - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 46
site at http://www.amx.com/. 4. If your projector is connected to a network which supports Simple Mail Transfer Protocol (SMTP), you can configure it Network Settings Password SNMP Input Length Maximum Number of Characters DHCP/Manual (N/A) IP Address XXX.XXX.XXX.XXX Subnet Mask XXX.XXX.XXX - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 47
Error Over Temperature Lamp Time Alert Submit Issue Test Mail 40 40 30 40 30 40 14 (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) are prohibited/ About Crestron e-Control® 1. The Crestron e-Control® page provides a variety of virtual keys to control the projector or adjust the projected pictures. i ii - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 48
iv iii v vi i. This section is only used with the Crestron Control System. Please contact Creston or refer to its user manual for setup information. ii. You can name the projector, keep track of its location and the person in charge of it. iii. You can adjust the LAN Control Settings. iv - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 49
(N/A) 20 20 3. The info page displays the information and status of this projector. Press Exit to go back to the remote network operation page. 4. After pressing please access below website to get RoomView™ User Guide and more information: http://www.crestron.com/products/roomview_connected_embedded_projectors_devices/ - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 50
SNMP, AMX and Xpanel formats supported This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant. For details, please follow its user guide or website respectively to control and manage projectors. Using the projector in standby mode Some of the projector functions are available in standby - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 51
menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu (PJD5226w/ PJD6553w/PJD6653w/ PJD6683w only) Keystone Position Phase H. Size Zoom 3D Sync TI 3D DLP Link/Off 3D Sync Invert - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 52
Sync/Lamp Mode/DCR/Closed Caption/Auto Off (Auto Power My Button Off)/Message/Screen Color/Screen Capture (PJD6223/PJD6253/PJD6353/PJD6383/PJD6553w/ PJD6653w/PJD6683w only)/Information Language Multi-language OSD selection Projector Position Front Table/Rear Table/ Rear Ceiling/Front Ceiling - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 53
Settings Projector IP Address (PJD6223/ PJD6253/ PJD6353/ PJD6383/ Subnet Mask Default Gateway DNS Server PJD6553w/ PJD6653w/ Apply PJD6683w only) Caption Version CC1/CC2/CC3/CC4 Lamp Mode Normal/Economic Lamp Settings Reset Lamp Timer Equivalent Lamp Hour Timer Period 1~240 minutes - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 54
Main menu Sub-menu 6. INFORMATION Current System Status Options • Source • Color Mode • Resolution • Color System • Equivalent Lamp Hour • MAC Address (PJD6223/ PJD6253/PJD6353/PJD6383/ PJD6553w/PJD6653w/ PJD6683w only) 49 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 55
PJD5226w. You need to wear a pair of 3D glasses to view the 3D images. • TI 3D DLP Link: Enables projector for TI 3D DLP Link. • Off: Disables 3D. 3D Sync Invert When the enable this function to correct the problem. (For TI 3D DLP Link only) Color Management See "Color Management" on page 35 for details - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 56
Color Mode Reference Mode Brightness Contrast Color Tint Sharpness Brilliant Color Description Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 32 for details. Selects a picture mode that most - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 57
See "Switching input signal" on page 27 for details. Color Space Conversion See "Changing Color Space" on page 27 for details. Allows the projector to decrease the power consumption DynamicEco automatically if no input signal is detected after a set period of time. Timer It takes some time to - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 58
See "Using the menus" on page 23 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 59
menu Function Audio Settings Menu Settings Closed Caption Lamp Settings Presentation Timer Description The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 60
input signal. Color System Shows input system format, NTSC, PAL, SECAM, or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. MAC Address Shows the MAC Address of your projector. MAC Address stands for Media Access Control Address, which is a physical layer address used - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 61
lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whenever you case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 62
menu. 4. To leave the menu, press MENU/EXIT on the projector or Exit on the remote control. You can also get the lamp hour information on the INFORMATION menu. Extending lamp life The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 63
If the lamp is not replaced beforehand, it must be replaced when you see this message. The lamp MUST be replaced before the projector will operate normally. Notice Replace Lamp Now Lamp > ____ Hours Lamp usage time exceeded OK Notice Lamp usage time exceeded Replace lamp (refer to User Manual) Then - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 64
sharp pieces. Before replacing the lamp, clean the lamp compartment and dispose of cleaning materials. Be careful of sharp edges in the lamp compartment. Wash hands after lamp replacement. • Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 65
in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 7. Insert the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 66
A warning message is displayed asking if you want to reset the lamp timer. 17. Highlight Reset and press MODE/ENTER on the projector or ENTER on the remote control. The lamp time will be reset to '0'. CAUTION Do not reset if the lamp is not new or replaced as this could cause damage. Notice Reset - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 67
Off Red Red Red Red Red Red Red Red Red Green Power events Off Stand-by mode Off Powering up Off Normal operation Lamp events The projector has shut down automatically. If you try to reRed start the projector, it will shut down again. Please contact your dealer for assistance. Red 1. The - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 68
cover. Remedy Adjust the focus of the lens using the focus ring. Adjust the projection angle and direction as well as the height of the projector if necessary. Open the lens cover. Remedy Replace the battery with a new one. Remove the obstacle. Stand within 8 meters (26 feet) of the - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 69
Mechanical Weight DLP Projector PJD5126: 800 x 600 SVGA PJD5226/PJD6223/PJD6253/PJD6353/PJD6383: 1024 x 768 XGA PJD5226w/PJD6553w/PJD6653w/PJD6683w: 1280 x 800 WXGA 1-CHIP DMD PJD5126/PJD5226/PJD5226w/PJD6223/PJD6353/PJD6653w: 180 W lamp PJD6253/PJD6383/PJD6553w/PJD6683w: 240 W lamp PJD5126/PJD5226 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 70
input Analog - D-Sub Component RCA jack x 3 (through RGB input) Digital - PJD5126/PJD5226/PJD5226w: N/A PJD6223/PJD6253/PJD6353/PJD6383/PJD6553w/PJD6653w/ PJD6683w: HDMI V1.3 x 1 Audio signal input PC audio jack x 1 PC audio jack x 2 Output terminal RGB output Speaker D-Sub 15-pin (female - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 71
/PJD5226/PJD5226w/ PJD6223/PJD6253/PJD6553w MENU EXIT SOURCE MTEEOMPNDTEER LMAMPUTO 242 84 PJD6353/PJD6383/ PJD6653w/PJD6683w 294 MENU EXIT SOURCE MTEEOMPNDTEER LMMP AU TO 242 84 Ceiling mount installation 160 137 294 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 115 80 Unit: mm 66 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 72
Timing chart Supported timing for PC input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1280 x 960 1400 x 1050 1600 x 1200 640 x 480@ - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 73
Supported timing for Component-YPbPr input Signal Format 480i(525i)@60Hz 480p .00 60 50 Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 74
optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic Corporation makes no without obligation to notify any person of such revision or changes. *DLP and Digital Micromirror Device (DMD) are trademarks of Texas Instruments. - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 75
83 F4 83 7C PgUp NEC 83 F4 06 F9 PgDn NEC 83 F4 05 FA Info NEC 83 F4 97 68 PJD6253/PJD6383/ PJD6553w/PJD6683w 70 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 76
83 F4 5B A4 PgUp NEC 83 F4 5D A2 PgDn NEC 83 F4 5C A3 Info NEC 83 F4 5F A0 PJD6253/PJD6383/ PJD6553w/PJD6683w 71 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 77
0x14 0x00 0x03 0x00 0x00 0x00 0x01 0x18 = On Ex2. Read brightness: 0x05 0x14 0x00 0x04 0x00 0x00 0x00 0x32 0x00 0x4A = 50 Ex3. Read lamp hours: 0x05 0x14 0x00 0x06 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x42 = 40 • The RJ45 commands can only be received via TCP port 4661 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 78
Reset Splash Screen Quick Power Off High Altitude Mode Lamp Mode Message Execute Write Read Write Read Write Read Write Read Write Read Splash Screen Black Splash Screen Blue Splash Screen ViewSonic Splash Screen Screen Capture Splash Screen Off Splash Screen status Quick Power Off Off Quick Power - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 79
3D Sync Invert Contrast Brightness Write Read Write Read Write Read Write Read Write Front Table Rear Table Rear Ceiling Front Ceiling projector position status OFF TI 3D DLP Link 3D Sync Status Off On 3D Sync Invert Status Contrast decrease Contrast increase Contrast ratio Brightness decrease - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 80
Horizontal position Write Read Vertical position Write Read Color temperature Write Read Blank Write Read KeystoneVertical Write Read Horizontal position shift right Horizontal position shift left Horizontal position Vertical position shift up Vertical position shift down read Vertical - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 81
Color mode Primary Color Hue Saturation Write Read Write Read Write Read Write Read Brightest Movie User 1 User 2 PC / Gaming ViewMatch Dynamic PC Dynamic Movie Preset mode status Primary color R Primary color G Primary color B Primary color C Primary color M Primary color Y Primary color status - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 82
Gain Freeze Source input Quick Auto Search Mute Volume Write Read Write Read Write Read Write Read Write Read Write Read Gain decrease Gain increase Gain Freeze on Freeze off Freeze status Input source VGA Input source VGA2 Input source Composite Input source SVIDEO Input source HDMI Source Quick - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 83
Lamp Time Error status Write Read Read Reset Lamp usuage hour Lamp usuage hour Read error status 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x01 0x00 0x62 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x01 0x63 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x0C 0x0D 0x66 78 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 84
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Zealand Canada Hong Kong India Korea Web Site T=Telephone F=Fax www.viewsonic.com.au www.viewsonic.com www.viewsoniceurope. com - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 85
Limited Warranty VIEWSONIC® PROJECTOR What the warranty covers: use, during the warranty period. If a product proves to be defective in material or workmanship during Replacement product or parts may include remanufactured or refurbished parts or components. Limited Three (3) year General Warranty - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 86
3. How to get service: 1. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial of such damages. 2. 3. Effect of state law: Sales outside the U.S.A. and Canada: 81 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 87
VIEWSONIC® PROJECTOR will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include How long the warranty is effective: consumer purchase. only. Who the warranty protects: What the warranty does not cover: How to get service: information - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 88
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: NÚMERO , Chih. Distrito Federal: Cuernavaca Guadalajara, Jal.: Guerrero Acapulco Monterrey: MERIDA: Oaxaca, Oax.: Tijuana: FOR USA SUPPORT: 83 - ViewSonic PJD6683ws | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJ - Page 89
PJD5126_PJD5226_
PJD5226w_PJD6223_
PJD6253_PJD6353_PJD6383_
PJD6553w_PJD6653w_
PJD6683w
DLP Projector
User Guide
IMPORTANT:
Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
±²³´µ¶·²¸¹¸¶º»²·»¼·½¾²µ¿À»¶Á»²·»µÂ³¸²Ã¸»¾Ä·½ÅĽ³µ»Åµ²·½»Æ¿³»Ç³½²¶·Ä¾»µ³¾³¸Æ²¶·»È¶É»²·»
the upper right corner of our website.
“Antes de operar su equipo lea cu idadosamente
las instrucciones en este manual”
/ VS14555/VS14553/VS14195/VS14554/VS14550
Model No. VS14295/VS14551/VS14552/VS14191/VS14193