ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw
ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw Ratio Manual
View all ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw Ratio manual content summary:
- ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 1
service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// box in the upper right corner of our website. "Antes de operar su equipo lea cu idadosamente las instrucciones en este manual - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 2
. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 3
unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, 9. Do not defeat the safety purpose of the polarized or - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 4
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 5
product will best prepare you for future customer service needs. Please print this user guide and fill the information in the "For Your Records" section. For additional information, please see the "Customer Support" section in this guide. Product Name: Model Number: Document Number: Serial Number - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 6
Table of contents Important safety instructions 2 Introduction 4 Projector features 4 Shipping contents 5 Projector exterior view 6 Using the dust filter (optional accessory 59 Lamp information 61 Troubleshooting 64 Specifications 65 Projector specifications 65 Dimensions 67 Ceiling mount - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 7
the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 4. Always open - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 8
the power supply's wall socket and call your local service center to have the projector serviced. 18. This product is capable of displaying inverted It should be used with a commercially available theft prevention cable. Safety instructions for ceiling mounting of the projector We want you to have a - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 9
for better control of time during presentations • LAN Settings allowing management of projector status from a remote computer (for selected models) • Supports 3D display • Color Management allowing color adjustments to your liking • Less than 0.5W power consumption when power saving mode is turned - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 10
region, and may differ from those illustrated. Projector Power Cord VGA Cable (for selected models) Multi-language User Manual CD Quick Start Guide ViewSonic Remote Control & Batteries Cable management cover (for selected models) HDMI Cable (for selected models) Optional accessories - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 11
Projector exterior view Front/upper side 1 6 2 3 4 7 5 8 Rear/lower side PJD6252L/PJD6551W/PJD7326/PJD7526W 9 10 11 12 13 14 15 16 17 18 19 20 PJD7720HD 21 22 1. External control panel (See "Projector" on page 7 for details.) 2. Lamp cover 3. Vent (heated air exhaust) 4. Front IR remote - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 12
projector's temperature becomes too high. 4. / / / (Keystone keys) Manually corrects distorted images resulting from an angled projection. Left/ Right/ Up lamp. Lights up or flashes when the lamp has developed a problem. Selects the desired menu items and makes adjustments. 12. Color Mode - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 13
mouse (PJD7326/PJD7526W) mode is activated. / (Keystone keys) (PJD6252L/ PJD6551W/PJD7720HD) Only available when a PC input signal is selected. Manually corrects distorted images resulting from an angled projection. Left/ Right/ Up/ Down Selects the desired menu items and makes adjustments - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 14
9. Mouse 19. PgUp (Page Up)/PgDn (Page Down) Switches between the normal and mouse Operates your display software program modes. (on a connected PC) which responds to PgUp, PgDn, , : active after pressing Mouse. An icon appears on the screen to indicate the activation of the mouse mode. page - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 15
can prevent interference from other remote controls. Set the remote control code for the projector first before changing that for the remote control. To switch the code for the projector, select from among 1 to 8 in the SYSTEM SETTING: ADVANCED > Remote Control Code menu. To switch the code for - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 16
• Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the batteries into a fire. There may be danger of an explosion. • If - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 17
Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 18
"screen" mentioned below refers to the projection screen usually consisting of a screen surface and a support structure. PJD6252L/PJD7326 • 4:3 image on a 4:3 screen (b) (a) (d) (c) (f) (e) (a) (c) (d) (e) (f) (b) • 4:3 image on a 16:10 screen (a) (e): Screen (b) (d) (c) (f) (e) (f): Center of - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 19
PJD6551W/PJD7526W • 16:10 image on a 16:10 screen (b) (a) (d) (c) (f) (e) • 16:10 image on a 4:3 screen (b) (a) (d) (e): Screen (c) (f) (e) (f): Center of lens (a) (e) (f) (c) (d) (b) (a) (e) (f) (c) (d) (b) (a) Screen Size [inch (cm)] 16:10 image on a 16:10 Screen (b) Projection distance [m - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 20
PJD7720HD • 16:9 image on a 16:9 screen (b) (a) (d) (c) (f) (e) • 16:9 image on a 4:3 screen (b) (a) (d) (e): Screen (c) (f) (e) (f): Center of lens (a) (e) (f) (c) (d) (b) (a) (e) (f) (c) (d) (b) (a) Screen Size [inch (cm)] 16:9 image on a 16:9 Screen (b) Projection distance [m (inch)] min. - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 21
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 22
the screen, you can connect the MONITOR OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below: 1. Connect the projector to a computer as described in "Connecting a computer" on page 17. 2. Take a suitable VGA cable (only one supplied) and - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 23
Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: • HDMI • Component Video • S-Video • Video (composite) You need only connect the projector to a Video source device using just one of the above - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 24
If you have a separate sound system, you will most likely want to connect the audio output of your Video source device to that sound system, instead of to the mono audio projector. Connecting an HDMI device You should use an HDMI cable when making connection between the projector and HDMI devices. - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 25
Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. 1. Take an S-Video cable and - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 26
About the microphone input • If you wish to use a microphone, connect a 3.5 mini jack cable microphone to the projector. • You can use a wireless microphone as long as a wireless module is attached to the projector's microphone input jack and it works well with the associated devices. To ensure a - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 27
Ring Tone" on page 47 for details. 4. If the projector is activated for the first time, select your OSD language following the on-screen instructions. 5. Switch all of the connected equipment on. 6. The projector will start to search for input signals. The current input signal being scanned appears - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 28
Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. The OSD screenshots below are for reference only, and may differ from the actual design. Below is the overview of the OSD menu. Main menu icon Highlight Sub-menu Current input - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 29
the message 'INPUT PASSWORD' follows. You can retry by entering another six-digit password, or if you did not record the password in this user manual, and you absolutely do not remember it, you can use the password recall procedure. See "Entering the password recall procedure" on page 25 for - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 30
3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 31
the Quick Auto Search function in the SOURCE menu is On if you want the projector to automatically search for the signals. You can also manually select the desired signal by pressing one of the source selection keys on the remote control, or cycle through the available input signals. PJD6252L - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 32
• Normal: Sets the HDMI color range as 15 - 235. • Auto: Sets the projector to detect the HDMI range of the input signal automatically. This function is only available when the HDMI input port is in use. Refer to the documentation of the device for information on the color space and HDMI range - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 33
projected image becomes a trapezoid due to angled projection. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control 1. Press / / / to display the Keystone correction page. 2. Press to correct - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 34
Adjusting 4 corners (PJD7326/PJD7526W) You can manually adjusts the shape and size of an image that is unevenly rectangular on all sides. 1. To display the Corner Adj. page, you can do one - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 35
4. To reduce size of the picture, press Enter to switch back to the zoom in/out functionality, and press repeatedly until it is restored to the original size. You can also press Auto Sync on the remote control to restore the picture to its original size. • Using the OSD menu 1. Open the OSD menu and - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 36
4. 16:10 (PJD6551W/PJD7526W): Scales an image so that it is displayed in the center of the screen with a 16:10 aspect ratio. This is most suitable for images which are already in a 16:10 16:10 picture aspect, as it displays them without aspect alteration. 5. Panorama (PJD6551W/PJD7526W/ PJD7720HD - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 37
3. Standard mode: Is designed for presentations under daylight environment to match PC and notebook coloring. 4. ViewMatch sRGB mode: Switches between high brightness performance and accurate color performance. 5. Movie mode: Is appropriate for playing colorful movies, video clips from digital - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 38
This function is only available when the input signal is S-Video, Video, YPbPr (digital) or YCbCr (digital). Adjusting Tint Go to the PICTURE > Advanced > Tint menu and press / . The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the picture becomes. - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 39
2. Press / to select Cool, Neutral, Normal or Warm and press Enter. 3. Press / to highlight the item you want to change and adjust the values by pressing / . • Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue. • Red Offset/Green Offset/Blue Offset: Adjusts the - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 40
9. Press Exit to exit and save the settings. Setting the presentation timer Presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: • Using the remote control 1. Press on - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 41
To cancel the timer, perform the following steps: 1. Press on the remote control or go to the SYSTEM SETTING: BASIC > Advanced > Presentation Timer menu. 2. Highlight Off. Press Enter. A confirmation message displays. 3. Highlight Yes and press Enter to confirm. You will see the message "Timer is - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 42
. However, this is not to state that this projector can operate under any and all harsh or extreme conditions. Using the CEC function This projector supports CEC (Consumer Electronics Control) function for synchronized power on/off operation via HDMI connection. That is, if a device that also - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 43
Sync information and once detected, it projects images in 3D format automatically. In other cases, you may need to manually select a 3D Sync format for the projector to project 3D images correctly. To select a 3D Sync format: , set the 3D Sync Invert function to "Invert" to correct the problem. 38 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 44
Controlling the projector through a LAN environment (for selected models) The projector supports Crestron® software. With correct settings for the LAN Control Settings menu, you can manage the projector from a computer using a web browser when the computer and - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 45
area network to control the projector. If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher. The screen shots in this manual are for reference only, and may differ from the actual design. 1. Enter the address of the projector in the address bar of your browser and - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 46
4. If your projector is connected to a network which supports Simple Mail Transfer Protocol (SMTP), you can configure it to alert you via email on significant events. 5. The Crestron (e-Control) page displays the Crestron e-Control - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 47
blow: Category Item Network Network Settings Password SNMP Email Setting Email Alert SMTP Setting Alert Condition Input Length Maximum Number of Characters DHCP/Manual (N/A) IP Address XXX.XXX.XXX.XXX Subnet Mask XXX.XXX.XXX.XXX Gateway XXX.XXX.XXX.XXX DNS Server XXX.XXX.XXX.XXX - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 48
on this projector. i ii iv iii v vi i. This section is only used with the Crestron Control System. Please contact Creston or refer to its user manual for setup information. ii. You can name the projector, keep track of its location and the person in charge of it. 43 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 49
iii. You can adjust the LAN Control Settings. iv. Once set, access to the remote network operation on this projector has been password-protected. v. Once set, access to the tools page has been password-protected. To prevent errors, only input the English alphabet and digits on the tools page. After - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 50
"02" for IPID, "41794" for the reserved Crestron control port. About Crestron RoomView™ setting and command method, please access below website to get RoomView™ User Guide and more information: http://www.crestron.com/products/roomview_connected_embedded_projectors_devices/ resources.asp 45 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 51
PJLink™, SNMP, AMX and Xpanel formats supported This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant. For details, please follow its user guide or website respectively to control and manage projectors. Using the projector in standby mode Some of the projector functions are available in - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 52
Adjusting the Audio In 2 setting (for selected models) 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio In 2 menu. 2. Press / to decide the audio input source for the AUDIO IN 2/MIC port. This will affect the connection method for different devices, and where the - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 53
Shutting down the projector 1. Press Power and a confirmation message is displayed prompting you. If you don't respond in a few seconds, the message will disappear. 2. Press Power a second time. 3. Once the cooling process finishes, a "Power Off Ring Tone" will be heard. Disconnect the power cord - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 54
Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 55
Main menu Sub-menu Options Quick Auto Search Off/On Auto/Off/Frame Sequential/ 3D Settings 3D Sync Frame Packing/Top-Bottom/ Side-by-Side 3D Sync Invert Disable/Invert Active VGA Out (PJD6252L/PJD6551W/ Off/On Standby Settings PJD7326/PJD7526W) Active Audio Out Off/On LAN Control ( - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 56
Main menu 4. SYSTEM SETTING: BASIC 5. SYSTEM SETTING: ADVANCED Sub-menu Options My Button Auto (PJD6252L/PJD6551W/PJD7326/ PJD7526W)/Projection (Projector Position)/ Menu Position/Color Temp./Brightness/ Contrast/3D Settings/Screen Color/Splash Screen/Message/Quick Auto Search/CEC/DCR/ Closed - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 57
Main menu Sub-menu Options 5. SYSTEM SETTING: ADVANCED Lamp Mode Lamp Settings Reset Lamp Hours Lamp Hours Filter Mode Filter Settings Reset Filter Hours Filter Hours Remote Control Code Advanced Reset Settings Security Settings Panel Key Lock 6. INFORMATION Current System Status - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 58
Description of each menu 1. DISPLAY menu Function Screen Color Aspect Ratio Keystone Corner Adj. (PJD7326/ PJD7526W) Position (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) Phase (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) H. Size (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) Zoom Color Mode Brightness Contrast - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 59
2. PICTURE menu Function Description Color See "Adjusting Color" on page 32 for details. Tint See "Adjusting Tint" on page 33 for details. Sharpness See "Adjusting Sharpness" on page 33 for details. Advanced Gamma See "Selecting a gamma setting" on page 33 for details. Brilliant Color See " - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 60
3. SOURCE menu Function Smart Energy Smart Restart Quick Power Off Lamp SPA Mode (PJD7326/ PJD7526W) LAN Control Settings (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) Description Auto Power Off See "Setting Auto Power Off" on page 61 for details. Sleep Timer See "Setting Sleep Timer" on page 61 for - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 61
4. SYSTEM SETTING: BASIC menu Function Language Projector Position Menu Settings Blank Timer Splash Screen Screen Capture My Button Advanced Description Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 23 for details. See "Choosing a location" on page 12 for - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 62
Eco" on page 61 for details. Reset Lamp Hours Resets the lamp timer after new lamp is installed. For changing the lamp, please contact qualified service personnel. Lamp Hours See "Getting to know the lamp hour" on page 61 for details on how the total lamp hour is calculated. See "Using - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 63
5. SYSTEM SETTING: ADVANCED menu Function Description Remote Control Code See "Remote control code" on page 9 for details. Advanced Security Settings See "Utilizing the password function" on page 24 for details. Panel Key Lock See "Locking control keys" on page 36 for details. Reset Settings - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 64
detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 65
• If your projector is ceiling-mounted or is not easily accessible, pay special attention to your personal safety when replacing the dust filter. Installing the dust filter 1. Be sure to turn off the projector and unplug it from power source. 2. As the arrows shown to the right, fit the filter by - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 66
Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. To obtain the lamp hour information: 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Lamp Settings menu. 2. Press - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 67
" on page 63 for details. Replacing the lamp Turn the power off and disconnect the projector from the power outlet. Please contact qualified service personnel for changing the lamp. Type number: • PJD6252L: RLC-092 • PJD6551W: RLC-093 • PJD7326: RLC-104 • PJD7526W: RLC-105 • PJD7720HD: RLC-100 62 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 68
Indicators Light Status & Description Power events Blue Flashing Blue Blue Blue Flashing Red Blue Off Off Off Off Off Blue Off Stand-by mode Off Powering up Off Normal operation Off Normal power-down cooling (3 sec) Off Downloading Blue Burn in off Lamp events Blue Flashing Off Off Off - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 69
Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on again during the - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 70
Specifications Projector specifications • All specifications are subject to change without notice. • Not all models can be purchased in your region. General Product name Optical Resolution Display system Lamp Electrical Power supply Power consumption Mechanical Weight Input terminal Computer - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 71
SD/HDTV signal input Analog - D-Sub Component RCA jack x 3 (through RGB input) (PJD6252L/PJD6551W/PJD7326/PJD7526W) Digital - HDMI V1.4a x 1 Audio signal input Audio in jack x 1 Audio in jack/Microphone in x 1 (PJD6252L/PJD6551W/ PJD7326/PJD7526W) Microphone in x 1 (PJD7720HD) HDMI/MHL - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 72
Dimensions 315.24 mm (W) x 97.7 mm (H) x 227.93 mm (D) (Excluding extrusions) 227.93 97.7 315.24 Ceiling mount installation Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 60.87 63.62 1.45 198.10 Tripod mount installation Unit: mm 27.13 13.00 67 Unit: mm - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 73
Timing chart Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ UXGA WSXGA+ HD MAC 13" MAC 16" MAC 19" MAC 21" HDTV (1080p) Analog RGB Resolution (dots) Aspect Ratio 640 x 480 4:3 800 x 600 4:3 1024 x 768 4:3 1152 x 864 4:3 1280 x 768 15:9 1280 x 800 16:10 1360 x 768 16:9 1280 x - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 74
Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ WSXGA+ HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV (480p) SDTV (576p) SDTV (480i) SDTV (576i) HDMI Resolution (dots) Aspect Ratio 640 x 480 4:3 800 x 600 4:3 1024 x 768 4:3 1280 x 768 15:9 1280 x 800 16:10 1360 x 768 16:9 1280 x 960 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 75
for Side-by-Side, Top-Bottom, and Frame Sequential formats. ** 120 Hz signals are supported for Frame Sequential format only. *** Video signal (SDTV 480i) is supported for Frame Sequential format only. In Frame packing format Signal 1080p 720p In Side by side format Signal 1080i In Top and - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 76
Signal HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV (480p) SDTV (576p) SDTV (480i) SDTV (576i) Signal NTSC PAL PAL60 SECAM Component video Resolution (dots) Aspect Ratio 1920 x 1080 16:9 1920 x 1080 16:9 1280 x 720 16:9 720 x 480 4:3 / 16:9 720 x 576 4:3 / 16:9 720 x 480 4:3 / 16:9 720 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 77
or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic Corporation makes no representations or warranties, either - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 78
Appendix IR control table Key PgDn PgUp Blank Auto sync Up Down Left Right Color Mode Mute Enter Power ON Presentation Timer Exit D. ECO (Eco mode) Menu Mouse Mouse Left Mouse Right Source Pattern My button HDMI Volume+ VolumeMagnify + Magnify VGA1 VGA2 Format NEC NEC NEC NEC NEC NEC NEC NEC NEC - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 79
Address code Code 1 83F4 Code 2 93F4 Code 3 A3F4 Code 4 B3F4 Code 5 C3F4 Code 6 D3F4 Code 7 E3F4 Code 8 F3F4 RS232 command table Pin 1 3 5 7 9 Description NC TX GND RTSZ NC Baud Rate Data Length Parity Check Stop Bit Flow Control - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 80
Function Status Action Power Write Read Turn on Turn off Power status (on/off) Reset all settings Execute Reset Color Settings Execute Splash Screen Black Splash Screen Blue Splash Screen Write Splash Screen ViewSonic Splash Screen Screen Capture Splash Screen - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 81
Message Projector Position 3D Sync 3D Sync Invert Contrast Brightness Write Read Write Read Write Read Write Read Write Read Write Read Message Off Message On Message status Front Table Rear Table Rear Ceiling Front Ceiling projector position status OFF Auto Frame Sequential Frame Packing Top- - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 82
Aspect ratio Auto Adjust Horizontal position Vertical position Write Read Aspect ratio Auto Aspect ratio 4:3 Aspect ratio 16:9 Aspect ratio 16:10 Aspect ratio Anamorphic Aspect ratio Wide Aspect ratio 2.35:1 Aspect ratio Panorama Aspect ratio Execute Write Read Write Read Horizontal position - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 83
Color temperatur e Write Read Blank Write Read KeystoneVertical Write Read KeystoneHorizontal Write Read Color mode Write Read color temperature Warm color temperature Normal color temperature Neutral color temperature Cool color temperature status Blank on Blank off Blank status - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 84
Primary Color Hue Saturation Gain Freeze Write Read Write Read Write Read Write Read Write Read Primary color R Primary color G Primary color B Primary color C Primary color M Primary color Y Primary color status Hue decrease Hue increase Hue Saturation decrease Saturation increase Saturation Gain - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 85
Source input Quick Auto Search Mute Volume Write Read Write Read Write Read Write Read Input source VGA Input source VGA2 Input source HDMI Input source HDMI/MHL Input source Composite Input source SVIDEO Source Quick Auto Search on Quick Auto Search off Quick Auto Search status Mute on Mute off - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 86
Language Write Lamp Time Read Write Read 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x00 0x61 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x01 0x62 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x02 0x63 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x03 0x64 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x04 0x65 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 87
HDMI Format HDMI Range CEC Error status Brilliant Color Write Read Write Read Write Read Read Write Read RGB YUV Auto HDMI Format status Enhanced Normal Auto HDMI Range status Off On CEC status Read error status Brilliant Color 0 Brilliant Color 1 Brilliant Color 2 Brilliant Color 3 Brilliant - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 88
Remote Control code Write Read Screen Color Write Read Over Scan Write Read code 1 code 2 code 3 code 4 code 5 code 6 code 7 code 8 Remote Control code status Screen color Off Blackboard Greenboard Whiteboard Screen Color status Overscan Off Overscan 1 Overscan 2 Overscan 3 Overscan 4 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 89
Remote Key Write Menu Exit Up Down Left Right Source Enter Auto My Button 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0F 0x61 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x13 0x65 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0B 0x5D 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0C 0x5E 0x02 0x14 0x00 0x04 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 90
New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 [email protected] Canada www.viewsonic.com T= 1-866-463-4775 [email protected] Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/support/call-desk/ Hong Kong www.hk.viewsonic.com T= 852 3102 2900 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 91
the warranty does not cover: 2. Damage, deterioration, failure, or malfunction resulting from: instructions supplied with the product. c. Operation of the product for other than the normal intended which does not relate to a product defect. 3. Removal, installation, and set-up service charges. 86 - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 92
(please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 93
period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product's serial number - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 94
Centro 39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Ferrocarril Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico FOR USA SUPPORT: ViewSonic Corporation 14035 Pipeline Ave. Chino, CA 91710, USA E-Mail - ViewSonic PJD7720HD - 1920 x 1080 Resolution 3 200 ANSI Lumens 1.49-1.64:1 Throw - Page 95
PJD6252L/PJD6551W/PJD7326/
PJD7526W/PJD7720HD
DLP Projector
User Guide
Model No. V
S15913/VS16443/VS16444/VS16445/VS16483
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
±±±²³´µ±¶·¸´¹²¹·º»´¸»¼¸½¾´¶¿À»·Á»´¸»¶Âµ¹´Ã¹»¾Ä¸½ÅĽµ¶»Å¶´¸½»Æ¿µ»Çµ½´·¸Ä¾»¶µ¾µ¹Æ´·¸»
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”