ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat
ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Ratio Manual
View all ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Ratio manual content summary:
- ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 1
in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also operar su equipo lea cu idadosamente las instrucciones en este manual" Model No. VS15149/VS15541 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 2
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 3
ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 4
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/ EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 5
product will best prepare you for future customer service needs. Please print this user guide and fill the information in the "For Your Records" section. For additional information, please see the "Customer Support" section in this guide. Product Name: Model Number: Document Number: Serial Number - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 6
Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 7
and maintenance as recommended in this user's guide. ▀■ Warning▀■ Warning▀■ Warning▀■ Warning▀■ please allow the unit to cool down. Follow instructions as described on pages 65-66. This projector the screen. Please contact your local reseller or service center to change the lamp as soon as possible - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 8
Do: yy Turn off and unplug the power plug from the AC outlet before cleaning the product. yy Use a soft dry cloth with mild detergent to clean the display housing. yy Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: yy Block the slots and - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 9
Blending 52 OPTIONS 53 OPTIONS | Lamp Settings 55 OPTIONS | Remote Settings 56 OPTIONS | Advanced 57 Appendices 58 Troubleshooting 58 Image Problems 58 Projector Problems 61 On Screen Messages 64 Replacing the Lamp 65 Replacing the Filter 67 Compatibility Modes 68 Remote Key - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 10
XGA (1024x768) / WXGA(1280x800), support resolution: Up to WUXGA @60Hz (Reduced Blanking) and UXGA @60Hz `` Single lamp system `` Power Zoom/Focus `` Power lens shift `` Dynamic Aperture `` 10W x 1 speaker `` Filter module `` Support PIP/POP function `` Support network management for remote control - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 11
are in the box. If something is missing, please contact our customer service. Projector with lens cover Power Cord VGA Cable Pattern Power On Standby remote at remote control side Φ 2.5mm phone jack Documentation: yy User's Manual (CD) yy Quick Start Card yy Warranty Card (China only) Due to - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 12
Product Overview Main Unit 3 1 2 5 3 4 (Front View) 11 12 6 13 14 7 8 9 10 (Rear View) 1. Lens Ring 2. Zoom Lens 3. IR Receivers 4. LED Indicators 5. Lamp Door 6. Outlet Vent 7. Kensington Lock 8. Security Bar 9. Power Switch 10. Power Connector 11. Connector Panel 12. Inlet Vent & Filter - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 13
Control Panel 1 2 3 4 Shift Sync Source 56 7 8 9 10 11 1. / Power key & Power LED 2. Menu key 3. Enter key 4. Exit key 5. Shift key 6. Sync key 7. Focus key 8. Zoom key 9. Source key 10. Information key 11. Four directional select keys 12 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 14
Connection Ports 1 2 3 4 56 7 8 9 10 11 12 13 1. Composite Video Input Connector 2. HDMI Connector 3. DVI-D Connector 4. BNC Connector 5. Wired Remote Input Connector 6. 12V Trigger Relay Connector 7. RJ45 Network Connector 8. S-Video Input Connector 9. VGA Input Connector 10. VGA - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 15
Remote Control 1. Power ON Power on the projector. 2. Pattern Display a test pattern. 3. VGA Switch to VGA source. 2 4. BNC Switch to Component video 3 source. 5. Sync 4 Synchronize projector with 5 source. 6 6. Blank Switch to a blank screen. 7. Four Directional Select Keys 7 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 16
18. HDMI Switch to HDMI source. 19. S-Video Switch to S-Video source. 20. DVI Switch to DVI source. 21. Source Automatically scans for connected source. 22. Enter Confirm your item selection. 23. Mute Turn the projector audio off/on. 24. Memory Save the current lens settings to the memory. 25. Zoom - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 17
Installation Installing the Projector Lens Warning: Do not transport the projector with any lens installed. 1 2 4 3 5 Lens Installing Procedure: 1. Remove the lens ring cover by counter-clockwise rotation. 1 2. Remove the lens cap by counter-clockwise rotation. 2 3. Pull the release bar and - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 18
Connecting to Computer/Notebook Computer / Notebook 1 2 3 4 +12V Output 5 6 R 9 7 8 Plug for 12V DC jack Monitor Plug for wired remote at projector side Power socket Plug for wired remote at remote control side Plug: ID Φ 1.7mm OD Φ 4.0mm Φ 3.5mm phone jack Power Signal Ground Φ - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 19
Connecting to Video Sources DVD player S-Video output 1 2 3 DVD player, Set-top box, HDTV receiver R 6 4 5 Power socket DVD player 1. Composite Video cable 2. S-Video Cable 3. BNC Cable Audio output 4. HDMI Cable 5. Audio Cable 6. Power Cord Due to the difference in applications for - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 20
Powering On/Off the Projector Powering On the Projector 1. Securely connect the power cord and signal cable. Power on the switch 1 and the Power LED flashes Blue. 2. Turn on the lamp by pressing the " " button either on the control panel of the projector or on the remote control 2. The Power LED - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 21
Powering off the projector 1. Press the "Standby" button on the remote control or the " " button on the control panel to turn off the projector 1. The following message will be displayed on the screen. Press the "Standby" button on the remote control or the " " button on the control panel again 1 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 22
the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up again, please contact your nearest service center for assistance. LED Lighting Message Message Standby State (LAN off) Standby State (LAN On) Power on & Lamp lighting Power off (Cooling) Error - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 23
Adjusting the Projected Image Adjusting the Projector's Height The projector is equipped with elevator rubber feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 24
Adjusting the Projecting Image's Position To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. H H H1 Width H1 V1 V Height Screen V V1 For XGA - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 25
80 1.22 1.63 1.61 2.05 2.05 2.57 2.57 4.88 90 1.37 1.83 1.81 2.30 2.30 2.89 2.89 5.49 100 1.52 2.03 2.01 2.56 2.56 3.21 3.21 6.10 110 1.68 2.24 2.21 2.82 2.82 3.53 3.53 6.71 120 1.83 2.44 2.41 3.07 3.07 3.85 3.85 7.32 130 1.98 2.64 2.62 3.33 3.33 4. - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 26
170 2.29 3.66 3.66 4.69 4.69 5.90 5.86 11.24 180 2.42 3.88 3.88 4.96 4.96 6.24 6.20 11.90 190 2.56 4.09 4.09 5.24 5.24 6.59 6.55 12.56 200 2.69 4.31 4.31 5.51 5.51 6.94 6.89 13.23 250 3.37 5.38 5.38 6.89 6.89 8.67 8.62 16.53 300 4.04 6.46 6.46 8.27 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 27
User Controls Using the Control Panel Shift Sync Source Name Power Menu Exit Enter Four Directional Select Keys Sync Source Shift Focus Zoom Information Description Turn the projector on/off. Launch the on-screen display (OSD). Exit a menu. Confirm a selected item. 1. Use to select items or - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 28
On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Control Panel. - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 29
Structure Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. Main Menu Sub Menu Color Mode Wall Color Brightness Contrast Sharpness Saturation Tint PICTURE Advanced Aspect (for XGA) Aspect (for WXGA) Zoom Overscan H - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 30
Main Menu Sub Menu SCREEN PIP / POP Language Projection Menu Location Lens Function Security SETTING Signal (RGB) Signal (Video) Projector No Settings Screen PIP Location PIP Size 1/16 / 1/25 / 1/36 PIP/POP Source HDMI / VGA or BNC DVI / S-Video / Video / Swap Exit English / German / - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 31
Main Menu Sub Menu Audio Settings Advanced SETTING Network *Image Blending Settings Internal Speaker On / Off Mute On / Off Volume Exit Logo Viewsonic / Neutral / User Logo Capture On / Off Closed Captioning CC1 / CC2 / CC3 / CC4 / Off Exit Network State DHCP IP Address Subnet Mask - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 32
Main Menu Sub Menu Auto Source High Altitude Status Hide Keypad Lock Test Pattern Background Color Lamp Settings OPTIONS Remote Settings 12V Trigger Advanced HDMI Cable Information Reset Settings On / Off On / Off On / Off Lock / Unlock None / Grid / White Blue / Black / Red / Green / White - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 33
PICTURE Color Mode There are many factory presets optimized for various types of images. `` Presentation: Good color and brightness from PC input. `` Bright: Maximum brightness from PC input. `` Movie: For home theater. The Pro10 Series use Dynamic Color Wheel technology, so screen flickering when - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 34
increase the amount of green in the image. `` Press the ► button to increase the amount of red in the image. "Color" and "Tint" are only supported for composite and component sources. 33 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 35
PICTURE | Advanced Noise Reduction The motion Adaptive Noise Reduction reduces the amount of visible noise interlaced signals. The range is from "0" to "10". (0: Off) BrilliantColor™ Enable the BrilliantColorTM function to enhance the brightness while providing true, more vibrant colors in picture. - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 36
Color Space Select an appropriate color matrix type from AUTO, RGB, RGB(0-255), RGB(16235) or YUV. "RGB(0-255)" and "RGB(16-235)" are only supported for HDMI source. Color Settings Press into the next menu and then use ▲ or ▼ to select item. `` Red Gain/Green Gain/Blue Gain/Red Bias/ - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 37
SCREEN Aspect Use this function to choose your desired aspect ratio. `` 4:3: This format is for 4x3 input sources. `` 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Wide screen TV. `` Native: This format displays the original image without any scaling. `` Auto: - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 38
SCREEN | Geometry (additional accessory will be needed) PC Mode Enable RJ45 control with PC software that allows user to control geometry. Warp Enable the Geometry function and control by OSD. Keystone This allows you to correct the keystone distortion. `` Horizontal: Press the ◄ or ► to adjust - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 39
`` Pin Cushion/Barrel: Press the ◄ or ► to adjust the pincushion/barrel distortion. +/- 20% pincushion and barrel distortion correction. . `` Reset: Return to the default setting. 4-Corner This allows you to correct the trapezoidal distortion. `` 4 Corner position adjustments: Top Left, Bottom Left, - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 40
`` The screen is separated into 4 (2x2) grids and you can adjust every point of grids. Rotation This allows you to level the rotated image. `` Rotation: Press the ◄ or ► to adjust the angle of image. Rotation angles can reach to +/- 90 degree. `` Pin Cushion/Barrel: Press the ◄ or ► to adjust the - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 41
the table below: PIP/POP source HDMI VGA Main Source DVI-D BNC S-video Video HDMI V V V V VGA V V V V DVI-D V V BNC V V S-video V V Video V V NOTE: VGA and BNC can support Component. 40 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 42
SETTING Language Choose the multilingual OSD menu. Press ◄ or ► into the sub menu and then use the ▲ or ▼ to select your preferred language. Press "Enter" to finalize the selection. Projection ` ` Front-Desktop This is the default selection. The image is projected straight on the screen. ` ` - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 43
Rear-Desktop and Rear-Ceiling are to be used with a translucent screen. Menu Location Choose the menu location on the display screen. SETTING | Lens Function Focus Adjust focus function on the projected image. Zoom Adjust zoom function on the projected image. Lens Shift Shift the projected image. `` - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 44
incorrect password is entered 3 times, the projector will automatically shut down. `` If you have forgotten your password, please contact your local office for support. Password default value is "1234" (first time). Always keep the password in your files. If the password is forgotten or lost, please - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 45
switch on the projector without password verification. SETTING | Signal (RGB) Signal is supported except Video and S-Video. Frequency Change the display data frequency to match the items will appear for user to manually tune and saved in settings after that for next time projector turns off and on - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 46
SETTING | Signal (Video) "Signal" is only supported when the source is Video or S-video. White saturation in the image. IRE Adjust measurement of composite video signals. "IRE" is only supported on NTSC signal. Projector ID ID definition can be set up by menu (range 0-99) to indicate - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 47
SETTING | Audio Settings Internal Speaker Choose the "On" or "Off" to turn on or off the internal speaker. Mute `` Choose the "On" to turn mute on. `` Choose the "Off" to turn mute off. Volume `` Press the ◄ to decrease the volume. `` Press the ► to increase the volume. 46 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 48
SETTING | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. `` Viewsonic: The default startup screen. `` Neutral: Logo is not displayed on startup screen. `` User: Use stored picture from "Logo - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 49
0.0.0.0, please check the connection and try again. If still can not get the IP Address, please contact your network administrator. `` Off: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. 48 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 50
Gateway Select the default gateway of the network connected to the projector. DNS Select DNS number. Apply Press " " and then choose "Yes" to apply the selection. All of the new settings of the non-DHCP mode shall be triggered by "Yes". Control System IP Address Select an IP address for Crestron - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 51
the software for all users. (Operation UI as following image) Crestron RoomView function support is dependent on models. 1. Main Screen 2. Edit Room On the "Edit Room please access below website to get RoomView™ User Guide and more information: http://www.crestron.com/products/roomview_connected_embedded_ projectors_devices - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 52
3. Edit Attribute 4. Edit Event For more information, please visit http://www.crestron.com & www.crestron.com/getroomview. Network supports Crestron (Room View), AMX (Device Discovery Beacon Validation Tool) , PJLink and RS232 control. 51 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 53
SETTING | Image Blending (additional accessory will be needed) Blending `` Choose the "On" to turn blending on. `` Choose the "Off" to turn blending off. Crop `` Choose the "On" to turn crop on. `` Choose the "Off" to turn crop off. Overlap This allows you to set the overlap edge of blending area. - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 54
OPTIONS Auto Source `` On: The projector will only search current input connection. `` Off: The projector will search for other signals if the current input signal is lost. Press direct source key on remote controller, it will change source directly and automatically set the Source Lock to "ON". To - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 55
OPTIONS (Continue) 12V Trigger 12V trigger provides a standard trigger for motorized screens. HDMI Cable Specify the HDMI cable length. Available options: Normal / Long / Short. Information Display the projector information for source, resolution, and software version on the screen. 54 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 56
Remote code: show the remote code of the projector. Remote code(Active): show the remote code of the remote control. Reset Choose "Yes" to return the display parameters on all menus to the factory default settings. The following settings will still remain: Phase, H. Size, User, Language, Projector - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 57
OPTIONS | Remote Settings My Button Choose your desired function from "BrilliantColor", "Gamma", "DynamicBlack", "Color Temp.", "Projection", "Projector ID" or "HDMI Cable". Top IR Function When this function is "On", the projector can be operated by the remote control from top IR receiver. By - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 58
OPTIONS | Advanced Direct Power On Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the " " key on the projector control panel or on the remote control. Auto Power Off Sets the countdown timer interval. The countdown - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 59
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image Problems No image appears on-screen `` Ensure all the cables and power connections are correctly - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 60
`` If you are using a Notebook: -- First, follow the steps above to adjust resolution of the computer. -- Press the toggle output settings. example: [Fn]+[F4] Notebook Brand Acer Asus Dell Gateway IBM/Lenovo HP/Compaq NEC Toshiba Function Keys [Fn]+[F5] [Fn]+[F8] [Fn]+[F8] [Fn]+[F4] [Fn]+[F7] [ - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 61
Image has vertical flickering bar `` Use "Frequency" to make an adjustment. `` Check and reconfigure the display mode of your graphic card to make it compatible with the projector. Image is out of focus `` Make sure the lens cover is removed. `` Adjust the Focus function for the projector lens. `` - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 62
your remote to the correct IR code setting. When making a direct connection from your computer to the projector `` If you have network connection problem from your computer to the projector, please refer to the computer setting as below or contact with web administrator. Step 1: Find an IP Address - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 63
Step 4: On the General tab, under This connection use the following items, click Internet Protocol(TCP/IP), and then click "Properties". Step 5: Click Use the following IP address, and type in as below: 1) IP address: 192.168.0.101 2) Subnet mask: 255.255.255.0 3) Default gateway: 192.168.0.254 62 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 64
Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click "LAN Setting...". Step 7: All items in the Local Area Network (LAN) Setting window must unchecked. Then click "OK" button twice. Step 8: Connect a cat5 Ethernet cross-over cable - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 65
On Screen Messages yy Power off confirm yy Lamp error yy Lamp Life warning yy Filter error 64 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 66
Replacing the Lamp A warning message will be displayed once the lamp has surpassed life expectancy. At this point, it is recommended to change the lamp as soon as possible. Please contact your local reseller or ViewSonic to acquire a lamp. Type number: RLC-087 Warning: If ceiling mounted, please use - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 67
1 2 3 4 Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the " " button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the lamp door. 1 5. Open and pull up the lamp door. 2 6. Unscrew the three - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 68
Replacing the Filter 2 1 Filter Replacing Procedure: 1. Switch off the power to the projector by pressing the " " button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the four screws on the filter cover and pull out the cover. 1 5. Remove the - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 69
60 HDTV 1920 x 1080 33.8 30 1920 x 1080 28.1 25 Video ○ ○ ○ ○ Digital ○ - Analog Remark - - ○ 70Hz ○ 85Hz ○ ○ ○ ○ ○ ○ 72Hz ○ ○ ○ 56Hz ○ 60Hz ○ ○ 72Hz ○ 85Hz ○ ○ ○ 70Hz ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ Only support [RB] timing - - 68 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 70
- - ○ - ○ - ○ ○ - - ○ - ○ ○ - - ○ - ○ ○ - - ○ - ○ ○ - - ○ - ○ Power Mac G4 compatibility Digital Analog ○ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ - ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ (*1)1920 x 1200 @60hz only support RB(reduced blanking). 69 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 71
Remote Key Code Default custom code => 83F4 Mode 01 ~ 99 => 8301 ~ 8399 Format => NEC Key Sync(Auto Sync) Keystone Up Down Left Right Mode(Color Mode) Aspect Mute Enter Standby (Power Off) Power On Exit Menu Source VGA (PC) Video S-Video Byte3 08 09 0b 0c 0e 0f 10 13 14 15 16 17 28 30 40 41 52 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 72
RS232 Pin Assignments 9876 54321 Pin No. 1 2 3 4 5 6 7 8 9 PC Side N/A RXD TXD N/A GND N/A N/A N/A N/A Projector Side (RS232 Terminal) N/A RXD TXD N/A GND N/A N/A N/A N/A Setup Information RS-232 protocol Baud Rate 9600 bps (default) Data Length 8 bit Parity Check None Stop Bit 1 bit - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 73
RS232 Protocol Function List Main Menu PICTURE Sub Menu Color Mode Wall Color Sub Menu 2 Presentation Bright Movie sRGB DICOM SIM. User Read White Light Yellow Light Blue Pink Dark Green Sub Menu 3 Brightness Read Contrast Read Sharpness Read Saturation Read Tint Read Noise Reduction - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 74
Main Menu PICTURE SCREEN Sub Menu Sub Menu 2 Color Settings Advanced Input Source Aspect Zoom Exit 4:3 16 : 9 Native Auto Read Overscan H Image Shift + H Image Shift - H Image H Image V Image Shift + V Image Shift - V Image V Image Write Write Read Write Write Read PC Mode Warp Keystone - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 75
Main Menu Sub Menu Sub Menu 2 4-Corner Curve Geometry SCREEN Rotation V Keystone Read Screen PIP Location PIP / POP PIP Size PIP / POP Source Swap Exit Sub Menu 3 Bottom Left Read Bottom Right + Bottom Right Bottom Right Read Sub Menu 4 Value RS232 Command 0x07 0x14 0x00 0x05 0x00 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 76
Main Menu Sub Menu Language Projection Menu Location Sub Menu 2 English German French Spanish Italian Russian Portuguese Swedish Simplified Chinese Korean Traditional Chinese Turkish Polish Japanese Norwegian Exit Front-Desktop Rear-Desktop Front-Ceiling Rear-Ceiling Top Left Top Right Center - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 77
Main Menu SETTING Sub Menu Sub Menu 2 Phase H. Position Signal (RGB) V. Position Automatic Exit White Level Black Level Signal (Video) Saturation IRE Exit Projector No Read Internal Speaker Audio Settings Mute Volume Exit Logo Advanced Logo Capture Closed Captioning Exit Sub Menu - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 78
Main Menu SETTING OPTIONS Sub Menu Sub Menu 2 Auto Source High Altitude Status Hide Keypad Lock Test Pattern None Grid White Background Color Sub Menu 3 On / Off On / Off Off On Lock / Unlock Blue / Black / Red / Green / White Lamp Hour Lamp Reminder Read On / Off Lamp Settings Lamp - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 79
Main Menu Sub Menu Sub Menu 2 OPTIONS HDMI Cable Information Reset Sub Menu 3 Normal / Long / Short Yes / No Sub Menu 4 Read Write Value Normal Short Long No Additional commands (Not in OSD) Main Menu Power Force reset Sub Menu Turn On Turn Off Sub Menu 2 Sub Menu 3 Sub Menu 4 Value - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 80
Ceiling Mount Installation If you wish to use a third party ceiling mount kit, please ensure the screws which are used to attach a mount to the projector meet the following specifications: yy Screw type: M6 x 4 Please note that damage resulting from incorrect installation will invalidate the - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 81
12°, Type A DMD, 0.7" XGA, DC3 / 0.65" WXGA, DC3 DDP2431 + PW392C XGA (1024x768) / WXGA (1280x800) Support Resolution: Up to WUXGA @60Hz (Reduced Blanking) and UXGA @60Hz IBM PC Compatible, support HDTV (1080i/p, 720p, 576i/p, 480i/p) include both PC and component inputs NTSC M(3.58MHz), 4.43MHz PAL - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 82
12V Trigger x 1 yy RJ45 x 1 yy Wired remote port In x 1 yy AC power cord x 1 yy VGA cable x 1 yy Remote control (with batteries) x 1 yy User Manual CD x 1 yy Lens mount cover x 1 yy Quick Setup Card x 1 yy Warranty Card x 1 (China only) Design and specifications are subject to change without prior - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 83
880 818 NZ= 0800 008 822 T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-3757 Email [email protected] [email protected] www.viewsoniceurope.com/uk/support/call-desk/ T= 852 3102 2900 T= 1800 266 0101 T= 080 333 2131 T= 0800-4441185 T= 853 2870 0303 Contact your - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 84
other acts of nature, improper maintenance, unauthorized product modification, or failure to follow instructions supplied with the product. b. Operation outside of product specifications. c. Operation of does not relate to a product defect. 3. Removal, installation, and set-up service charges. 83 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 85
(please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 86
modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. b. Any damage service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 87
39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. STD Av Ferrocarril Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico FOR USA SUPPORT: ViewSonic Corporation 381 Brea Canyon Road, Walnut, CA. 91789 USA Tel: 800-688 - ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 88
Pro10 Series
Professional DLP
®
Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for
future service. Warranty information contained in this User Guide will describe your
limited coverage from ViewSonic Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional
selection box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”
Model No. VS15149/VS15541