ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Inpu
ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Input Lag and USB C Manual
 |
View all ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Input Lag and USB C manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Input Lag and USB C manual content summary:
- ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Inpu - Page 1
PS500X/PS501X/PS501W/PS600X/ PS600W/PX706HD Lamp Swapping Instruction - ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Inpu - Page 2
Replacing the lamp Turn the power off and disconnect the projector from the power outlet. yy To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp. yy To reduce the risk of severe burns, allow the projector to cool for at least - ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Inpu - Page 3
7. Use the handle to slowly pull the lamp out of the projector. CAUTION yy Pulling it too quickly may cause the lamp to break and scatter 1 broken glass in the projector. 2 yy Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials - ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Inpu - Page 4
11. Tighten the screws that secure the lamp cover. CAUTION yy Loosen screw may cause a bad connection, which could result in malfunction. yy Do not over tighten the screw. Replacing the lamp After powering on the projector, open the OSD menu. Go to ADVANCED > Lamp Settings > Reset Lamp Hours and - ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Inpu - Page 5
-
1 -
2 -
3 -
4 -
5
 |
 |
PS500X/PS501X/PS501W/PS600X/
PS600W/PX706HD
Lamp Swapping Instruction