ViewSonic PX706HD Lamp Swapping Instruction

ViewSonic PX706HD Manual

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PX706HD | Lamp Swapping Instruction - Page 1
PS500X/PS501X/PS501W/PS600X/ PS600W/PX706HD Lamp Swapping Instruction
ViewSonic PX706HD | Lamp Swapping Instruction - Page 2
Replacing the lamp Turn the power off and disconnect the projector from the power outlet. yy To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp. yy To reduce the risk of severe burns, allow the projector to cool for at least
ViewSonic PX706HD | Lamp Swapping Instruction - Page 3
7. Use the handle to slowly pull the lamp out of the projector. CAUTION yy Pulling it too quickly may cause the lamp to break and scatter 1 broken glass in the projector. 2 yy Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials
ViewSonic PX706HD | Lamp Swapping Instruction - Page 4
11. Tighten the screws that secure the lamp cover. CAUTION yy Loosen screw may cause a bad connection, which could result in malfunction. yy Do not over tighten the screw. Replacing the lamp After powering on the projector, open the OSD menu. Go to ADVANCED > Lamp Settings > Reset Lamp Hours and
ViewSonic PX706HD | Lamp Swapping Instruction - Page 5

Match case Limit results 1 per page

PS500X/PS501X/PS501W/PS600X/

PS600W/PX706HD

Lamp Swapping Instruction