Home » ViewSonic Manuals » Projectors » ViewSonic Pro8200 » Manual Viewer

ViewSonic Pro8200 PRO8200 User Guide (English)

ViewSonic Pro8200 Manual

UPC - 766907496314

View all ViewSonic Pro8200 manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic Pro8200 manual content summary:

ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 1
ViewSonic® Pro8200 DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 2
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference 0.004% Lead. ViewSonic Pro8200 i
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 3
unit in accordance with the manufacturer's instructions. 8. Do not install near any your outlet, consult an electrician for replacement of the obsolete outlet. 10. of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has ViewSonic Pro8200 ii
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 4
noted below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic Pro8200 iii
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 5
For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: Pro8200 ViewSonic DLP Projector VS13648 Pro8200_UG_ENG Rev. 1A 08-25-10 Product disposal at end of product life The lamp in this product contains mercury which can be dangerous to you and the environment
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 6
the Projector Housing 33 Cleaning the Filter Cover 33 Replacing the Lamp 34 Specifications 36 Dimensions ...37 Ceiling mount installation 37 Appendix 38 LED Indicator Messages 38 Compatibility Modes 39 Troubleshooting ...41 RS-232 Command and Configuration 42 IR Control Code ...44 ViewSonic
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 7
integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: „ Single chip 0.65" Texas Instruments DLP® technology „ 1080p (1920 x 1080 pixels) „ Compatibility with Macintosh® computers
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 8
all these components: HDMI1 HDMI2 Compo Video PC Projector with Lens Cap AC Power Cord Swap Default Remote Control (IR) & batteries ViewSonic VGA Cable (D-SUB to DSUB) Optional accessories HDMI Cable ViewSonic CD Wizard Quick Start Guide Filter cover P/N: P4R34-4600-00 RS232 cable
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 9
Projector Carrying Case „ Contact you dealer immediately if any items are missing, appear damaged, or if the unit does not work. „ Save the original come-in handy if you ever to ship your unit. for maximum protection, repack your unit as it was originally packed at the factory. ViewSonic Pro8200 7
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 10
Projector Overview Front View 13 12 11 10 9 1 234 5 6 7 8 1 Lens cap 2 Elevator button 3 Elevator foot 4 Lens cap strap 5 Projection lens 6 Front IR remote control sensor 7 Ventilation holes (intake) 8 Filter cover 9 Speaker 10 Focus ring 11 Zoom ring 12 Control panel 13 Lamp cover ViewSonic
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 11
103 1 3 174 227 2 1 Ceiling mount holes (M4*8) 2 Tilt-adjustment feet 3 Security bar „ This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. „ Contact your dealer for information to mount the projector on a ceiling. ViewSonic Pro8200 9
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 12
Messages". 3 LAMP (Lamp LED indicator) Refer to "LED Indicator Messages". 4 Keystone/Arrow keys ( /Up, /Down) Manually correct distorted images resulting from the on-screen display menus. 9 Power Turn the projector on or off. 10 Right/Panel key Activate panel key lock. ViewSonic Pro8200 10
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 13
Connect S-Video output from video equipment to this jack. 5 USB A This connector supports firmware update. 6 HDMI 1 Connect HDMI output from video equipment to this jack. 7 HDMI 2 Connect HDMI output from video equipment to this jack. 8 DC 12V Out 12V DC out 9 MIC in Microphone input jack. 10 Audio
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 14
from video equipment to this jack. 14 Video Connect composite video output from video equipment to this jack. 15 Computer in 2 Connect image input signal (analog RGB or component) to this jack. 16 Computer in 1 Connect image input signal (analog RGB or component) to this jack. ViewSonic Pro8200 12
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 15
arrows to select the desired menu items and to make adjustments. Activate panel key lock. 13 Light Enable backlight functions of the remote control's buttons. 19 ESC Leave current page or items or to close OSD. 14 Compo Display Component video (YPbPr/ YCbCr) signal. ViewSonic Pro8200 13
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 16
current available settings. 21 PIP/POP Switch screen to PIP/POP by sequence. 22 Swap Swap input source in PIP or POP image. 23 Aspect Select the display aspect ratio. 24 RGBCMY Change indivial RGBCMY color (user color setting). 25 Default Restore settings to factory default. ViewSonic Pro8200 14
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 17
in or near to fire or water, keep batteries in a dark, cool and dry place. „ If suspect battery leakage, wipe out the leakage and then replace new batteries. If the leakage adheres to your body or clothes, rinse well with water immediately. ViewSonic Pro8200 15
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 18
the remote sensor is visible. „ Do not drop the remote control or jolt it. „ Keep the remote control out of locations with excessively high temperature or humidity. „ Do not get water on the remote control or place wet objects on it. „ Do not disassemble the remote control. ViewSonic Pro8200 16
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 19
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables available on the projector vary with each projector model. „ For detailed connection methods, see pages 18-21. ViewSonic Pro8200 17
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 20
on the projector to an external monitor with a VGA cable following the instructions below: To connect the projector to a monitor: 1. Connect the projector to projector. Important „ The Monitor Out output only works when Computer in 1 or Computer in 2 is made to the projector. ViewSonic Pro8200 18
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 21
result in a perfectly acceptable, but less than optimal result from your projector, being the least video quality of the available methods described here. See "Connecting a composite Video source device" on page 21 for how to connect the projector to a composite Video device. ViewSonic Pro8200 19
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 22
video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly. „ RGB to component adapter (ViewSonic P/N: J2552
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 23
device Examine your Video source device to determine if it has a set of unused composite Video output sockets available: „ If so, you the Video socket on the projector. Important „ If the selected video image is not displayed after the projector is turned on and the correct video ViewSonic Pro8200 21
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 24
the projector has completed the cooling cycle and has entered stand-by mode. Once in stand- by mode, simply press to restart the projector. 3. Disconnect the AC power cord from the electrical outlet and the projector. 4. Do not turn on the projector right after power off. ViewSonic Pro8200 22
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 25
feet are fully retracted before placing the projector in its carrying case. Adjusting the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust the image size by sliding the zoom ring. ViewSonic Pro8200 23
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 26
cm or more between the sides of the projector. „ Do not use the projector in a smoky environment. Smoke residue may build- up on critical parts and damage the projector or its performance. „ Consult with your dealer for special installation such as suspending from a ceiling. ViewSonic Pro8200 24
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 27
projector. Swap Default Important „ Keys on the remote control are still functional when panel key lock is enabled. „ If you press Power to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. ViewSonic Pro8200
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 28
in 3 Audio in 1, Audio in 2, Audio in 3 Audio in 1, Audio in 2, Audio in 3, HDMI -30 - +30 Auto, 4:3, 16:9, 16:10, ANAMORPHIC 1, ANAMORPHIC 2 Front-Table, Front-Ceiling, Rear-Table, Rear-Ceiling Filter Mode*2 High Altitude Quick Power On Quick Power Off DC 12V Trigger ViewSonic Pro8200 26
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 29
*1 Adjustable range and default setting vary depending on signal type. *2 This function is only available when the projector is installed an optional filter cover. *3 The selectable Function list includes Color Mode, Gamma, Overscan, Noise Reduction, Keystone and Filter Mode. ViewSonic Pro8200 27
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 30
the remote control again. The OSD menu will close and the projector will automatically save the new settings. Picture Color Mode There are many factory presets optimized for various types of images. „ Brightest : For the brightest environment. „ Standard : For computer or notebook. „ Theater
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 31
sound temporarily. Setting Auto Keystone Automatically correct distorted images resulting from an angled projection. Keystone Manually correct distorted images resulting from an angled projection. „ When adjusting the Keystone, Auto Keystone will be set at "Off" automatically. ViewSonic Pro8200 29
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 32
DCR function is on. Filter Mode Use this function to activate filter mode after the projector is installed an optional filter cover. High Altitude Use this function to allow the fans operates at full speed continuously to achieve proper high altitude cooling of the projector. ViewSonic Pro8200 30
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 33
been applied. Quick Power Off Enable the projector to turn off quickly. DC 12V Trigger Enable or disable to trigger external devices such as an electric screen. Option Password Set or delete the password. When the password function is added, image projection will require to input the preset password
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 34
the filter Hour to 0 hours. Equivalent Lamp Hours Display the lamp's elapsed operating time (in hours). Equivalent Lamp Hours Reset Reset the lamp Hour to 0 hours. Factory Default Restore settings to factory default. Language Select the language used by the on-screen menu. ViewSonic Pro8200 32
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 35
screen and diminish image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. Warning Never open any of the covers on the projector. Dangerous electrical voltages
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 36
message is displayed. Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement. „ The lamp is extremely hot right after turning off the projector. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least 45 minutes for
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 37
of glass, do not drop the unit and do not scratch the glass. „ Do not reuse the old lamp. This could cause the lamp to explode. „ Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. „ Do not use the projector with the lamp cover removed. ViewSonic Pro8200 35
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 38
jack x 1, RCA audio jack (L/R) x 1, 3.5 mm Mic input x1, USB A type x1 (supports firmware update) Output terminal D-Sub 15 pin x 1, Audio signal output (3.5 mm stereo mini jack) x 1 Control terminal RS-232 x 1, 12-Vdc trigger output x 1 Speaker 10 watt x 2 Video compatibility NTSC, NTSC
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 39
Dimensions 334.6 mm (W) x 264.5 mm (D) x 109.5 mm (H) 264.5 334.6 64.5 109.5 84.9 Ceiling mount installation 227 174 103 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) Unit: mm ViewSonic Pro8200 37
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 40
Solid Solid Flash Solid Off Meaning Lamp life end Standby mode when green mode is turned on. Standby mode when green mode is turned off. Powering up Normal operation Powering down (The projector needs to cool for 35 seconds after the power is turned off.) The projector system has some problems with
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 41
Modes Computer: Compatibility VGA Resolution 640 x 480 SVGA 800 x 600 XGA SXGA UXGA Mac 13 Mac 16 Mac 19 1080i30 1080i25 480p 576p 720p60 720p50 1080p60 1080p50 1024 x 768 1280 x 1024 1600 x 1200 640 x 480 832 x 624 1024 x 768 1920 x 1080 1920 x 1080 59.94 50 60 50 60 50 ViewSonic Pro8200 39
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 42
1080p 1080p 1080i 1080i 720p 720p 576p 576i 480p 480i Resolution 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1280 x 720 1280 x 720 720 x 576 720 x 576 720 x 480 720 x 480 H-Sync [KHz] 67.5 56.3 33.8 28.1 45 37.5 31.3 15.6 31.5 15.8 V-Sync [Hz] 60 50 60 50 60 50 50 50 60 60 ViewSonic Pro8200
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 43
on the front of the projector. Use the remote control within the effective range. „ Aim the remote control at the screen or at the front or back of the projector. „ Move the remote control so it is more directly in front of or behind the projector and not as far to the side. ViewSonic Pro8200 41
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 44
,00,00,00,00,00 LAMP HOURS RESET BE,EF,02,06,00,15,D8,4C,00,00,00,00,00 FILTER HOURS RESET BE,EF,02,06,00,C4,D9,4D,00,00,00,00,00 Projector status BE,EF,02,06,00,F7,D9,4E,00,00,00,00,00 ViewSonic Pro8200 42
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 45
D-Sub 9 pin 1 1 CD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Wire List C1 COLOR 1 Black 2 Brown 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 8 Purple 9 White SHELL DW C2 1 2 3 4 5 6 7 8 9 SHELL ViewSonic Pro8200 43
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 46
IR Control Code System Code: 83F4 Format : NEC HDMI1 HDMI2 Compo Video PC Swap Default 87 6D 6E 6F 67 08 82 83 8C 81 85 84 8D 0A 01 62 04 09 0B 03 06 8E 63 8F 05 ViewSonic Pro8200 44
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 47
ap.viewsonic.com United Kingdom www.viewsoniceurope.com/uk/ www.viewsoniceurope.com/uk/ support/call-desk/ [email protected] United States www.viewsonic.com T (Toll-Free)= 1-800-688-6688 T (Toll)= 1-424-233-2530 [email protected] F= 1-909-468-3757 ViewSonic Pro8200 45
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 48
warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. Limited Three (3) year General Warranty Subject to the more limited one (1) year warranty set out below
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 49
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card. For users in Europe and Russia, full details of warranty provided can be found in www.viewsoniceurope. com under Support/Warranty Information. 4.3: Projector Warranty ViewSonic Pro8200 PRJ_LW01 Rev. 1h 06-25-07 47
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 50
-in" which results when a static image is displayed on the product for an extended period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 51
for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com
ViewSonic Pro8200 | PRO8200 User Guide (English) - Page 52

Section	Page
Pro8200_UG_ENG-1.pdf	7
Projector Features	7
Package Contents	8
Projector with Lens Cap	8
AC Power Cord	8
Projector Overview	10
Front View	10
Rear View	11
Bottom View	11
Using the Product	12
Control Panel	12
Connection Ports	13
Remote Control	15
Installing the Batteries	17
1. Open the battery cover in the direction shown.	17
2. Install batteries as indicated by the diagram inside the compartment.	17
3. Close the battery cover into position.	17
Remote Control Operation	18
Connection	19
1. Turn all equipment off before making any connections.	19
2. Use the correct signal cables for each source.	19
3. Ensure the cables are firmly inserted.	19
Connecting a computer or monitor	20
Connecting a computer	20
1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer.	20
2. Connect the other end of the VGA cable to the Computer in 1 or Computer in 2 signal input socket on the projector.	20
Connecting a monitor	20
1. Connect the projector to a computer as described in “Connecting a computer” on page 18.	20
2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input socket of the video monitor.	20
3. Connect the other end of the cable to the Monitor Out socket on the projector.	20
Connecting Video source devices	21
Connecting a Component Video source device	22
1. Take a VGA (D-Sub) to HDTV (RCA) cable, Component Video cable or a Component Video to VGA (D-Sub) adaptor and connect the end...	22
2. If you are using the VGA (D-Sub) to HDTV (RCA) cable and the Component Video to VGA (D-Sub) adaptor, connect the other end of...	22
Connecting an S-Video source device	22
1. Take an S-Video cable and connect one end to the S-Video output socket of the Video source device.	22
2. Connect the other end of the S-Video cable to the S-Video socket on the projector.	22
Connecting a composite Video source device	23
1. Take a Video cable and connect one end to the composite Video output socket of the Video source device.	23
2. Connect the other end of the Video cable to the Video socket on the projector.	23
Operation	24
Powering On/Off the Projector	24
Powering On the Projector:	24
1. Remove the projector lens cap.	24
2. Complete the AC power cord and peripheral signal cable(s) connections.	24
3. Press to turn on the projector. The projector takes a minute or so to warm up.	24
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.	24
Powering Off the Projector:	24
1. Press to turn off the projector lamp. You will see a message \	24
2. Press again to confirm.	24
3. Disconnect the AC power cord from the electrical outlet and the projector.	24
4. Do not turn on the projector right after power off.	24
Adjusting the Projector Height	25
1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment.	25
2. To level the image on the screen, turn the tilt-adjustment feet to fine-tune the height.	25
Adjusting the Projector Zoom and Focus	25
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.	25
2. Adjust the image size by sliding the zoom ring.	25
Adjusting Projection Image Size	26
Locking control keys	27
1. Press on the projector or remote control.	27
2. A confirmation message is displayed. Select Yes to confirm.	27
Menu Operation	28
How to operate	30
1. Press MENU on the projector or Menu on the remote control to open the OSD menu.	30
2. When OSD is displayed, use p / q to select any feature in the main menu.	30
3. After selecting the desired main menu item, press u to enter sub-menu for feature setting.	30
4. Use p / q to select the desired item and adjust the settings with t / u.	30
5. Press MENU on the projector or Menu on the remote control, the screen will return to the main menu.	30
6. To exit OSD, Press MENU on the projector or Menu on the remote control again. The OSD menu will close and the projector will automatically save the new settings.	30
Maintenance	35
Cleaning the Lens	35
Cleaning the Projector Housing	35
Cleaning the Filter Cover	35
1. Switch the projector off and unplug the AC power cord from the wall socket.	35
2. Remove the filter cover as the illustration shown.	35
3. Clean the filter cover.	35
4. Replace the filter cover.	35
5. Attach the filter cover.	35
6. Plug the power back into the projector.	35
Replacing the Lamp	36
1. Turn off the projector.	37
2. If the projector is installed in a ceiling mount, remove it	37
3. Unplug the power cord.	37
4. Loosen the screw in the side of the lamp cover and remove the cover.	37
5. Remove the screws from the lamp module, raise the handle, and lift out the module.	37
6. Insert the new lamp module into the projector and tighten the screws.	37
7. Replace the lamp cover and tighten the screw.	37
8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.	37
9. Reset the lamp hour. Refer to the “Information” menu.	37
Specifications	38
Dimensions	39
Ceiling mount installation	39
Appendix	40
LED Indicator Messages	40
Compatibility Modes	41
Computer:	41
Video:	42
Troubleshooting	43
Start-up problems	43
Image problems	43
RS-232 Command and Configuration	44