ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw
ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw Ratio Manual
 |
View all ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw Ratio manual content summary:
- ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 1
a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also equipo lea cu idadosamente las instrucciones en este manual" Model No. VS16505/VS16506/VS16507/VS16508 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 2
. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 3
ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 4
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 5
product will best prepare you for future customer service needs. Please print this user guide and fill the information in the "For Your Records" section. For additional information, please see the "Customer Support" section in this guide. Product Name: Model Number: Document Number: Serial Number - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 6
This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2016 Disclaimer The - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 7
These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference. are no user-serviceable parts in the unit. For servicing, contact qualified service personnel. Follow all warnings and cautions in this manual and on the - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 8
Projector Installation Notice Do not tilt the projector to the left or right, otherwise lamp life could decrease dramatically, and may lead to other unpredictable damages. There is no limit on the tilt angle upward or downward. Allow at least 50 cm clearance around the exhaust vent. Minimum - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 9
power cord during the shutdown process, as it may cause damage to the projector. In the meantime, the delayed heat radiating will also affect the service life of the projector. The shutdown process may vary depending on the model used. Whatever the case may be, be sure to disconnect the power - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 10
done incorrectly. See Replacing the Projection Lamp on page 55 for clear and safe instructions for this procedure. Before replacing the lamp: Unplug the power cord. DISPOSAL: Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 11
High brightness for projection in just about any environment. Supports resolutions up to WUXGA for clear and crisp images. DLP® security features include: Kensington security slot, security bar. About this Manual This manual is intended for end users and describes how to install and operate - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 12
the Case ...59 Cleaning the Air Filter ...60 USING THE PHYSICAL LOCK ...62 Using the Kensington Security Slot ...62 Using the Security Bar Lock ...62 TROUBLESHOOTING ...63 COMMON PROBLEMS AND SOLUTIONS ...63 TIPS FOR - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 13
LED ERROR MESSAGES ...64 IMAGE PROBLEMS ...65 LAMP PROBLEMS...65 REMOTE CONTROL PROBLEMS...66 AUDIO PROBLEMS ...66 HAVING THE PROJECTOR SERVICED ...66 HDMI Q & A ...67 SPECIFICATIONS...68 SPECIFICATIONS ...68 PROJECTION DISTANCE VS. PROJECTION SIZE ...70 PRO9510L / PRO9520WL / PRO9530HDL / - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 14
(This User's Manual) Quick Start Guide Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It is recommend that you keep the original packing material should you ever need to return the equipment for warranty service - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 15
Views of Projector Parts Front-right View 7 1 23 ITEM LABEL 1. Lamp Cover 2. Tilt Adjuster 3. Lens 4. IR Receiver 5. LEDs 6. Vent 7. Vertical Lens Shift 8. Horizontal Lens Shift 9. Zoom Ring 10. Focus Ring 11. Function Keys 45 2 DESCRIPTION Remove cover to replace lamp. Rotate - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 16
Top view-On-Screen Display (OSD) buttons and LEDs 12 34 FOCUS ZOOM LENS SHIFT MENU EXIT ENTER SOURCE ITEM LABEL 1. Power LED 2. Lamp LED 3. Temp LED 4. Filter LED 5. 6. MENU / EXIT 7. 8. 9. ENTER 10. 11. SOURCE 12. (My Button) 13. 5 6 7 8 9 10 11 12 13 DESCRIPTION Display the - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 17
ote Out S-Video Audio Video In L Audio R DV I-D In 1 In 2 In Audi o Service MIC Out L R Audi o Out 12V Out IR 24 2322212019 1817161514 13 ITEM LABEL 1. HDMI 1 from Ethernet. Connect a USB cable for USB host. Note: Support 5V/1.0A for each port output as long as the projector Power - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 18
turn on/off the projector. Screen controllers are supplied and supported by screen manufacturers. Do not use this jack for anything Out S-Video Audio Video In L Audio R D V I-D In 1 In 2 In Audio Service MIC Out L R Audio Out 12V Out IR 14 3 13 12 11 1. Composite Video Cable - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 19
Bottom view Ceiling mount screws: M4 x 5 (Max. L = 12 mm) Unit: mm ITEM 1. LABEL Tilt Adjustor 2. Ceiling Mount Holes DESCRIPTION SEE PAGE Rotate adjuster lever to adjust angle position. 16 Contact your dealer for information on mounting the projector on a ceiling. Note: When installing, - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 20
screens. 3. The buttons and keys on the projector have the same functions as the corresponding buttons on the remote control. This user's manual describes the functions based on the remote control. Note: Complies with FDA performance standards for laser products except for deviations pursuant to - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 21
ITEM 1. 2. 3. 4. 5. LABEL IR Transmitter Power On HDMI COMP Video 6. 7. Auto SYNC 8. 9. MENU 10. 11. Laser 12. 13. MOUSE 14. ID SET 15. PgUp / 1 16. Blank / 3 17. / 4 18. / 6 19. 20. ECO MODE 21. 22. Laser 23. 24. HDMI / MHL 25. Source 26. BNC 27. Freeze DESCRIPTION SEE PAGE - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 22
ITEM 28. LABEL 29. 30. EXIT 31. 32. PgDn / 2 33. PATTERN / 5 34. / 7 35. / 8 36. 37. 38. COLOR MODE 39. Wired Jack DESCRIPTION SEE PAGE Enters and confirms settings in the OSD. Displays the Corner Adj. page. 23 Navigates and changes settings in the OSD. Quick Menu - For Horizontal - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 23
Using the remote mouse control The capability of operating your computer with the remote control gives you more flexibility when delivering presentations. 1. Connect the projector to your PC or notebook with a USB cable prior to using the remote control in place of your computer's mouse. 2. Set the - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 24
Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. SETUP AND OPERATION 2. Insert the battery with the positive side facing up. 3. Replace the cover. Caution: 1. Only use AAA batteries (Alkaline batteries are - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 25
Starting and Shutting down the Projector 1. Securely connect the power cord and signal cable. When connected, the power led will flash green to solid green. 2. Turn on the lamp by pressing " " button on the top of the projector or " " on the remote control. The PWR LED will now flash green. The - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 26
3. If more than one input device is connected, press the SOURCE button and use ▲▼ to scroll among devices. (Component is supported through the RGB to Component adapter.) 4. When the "Power Off? /Press Power again" message appears, press the POWER button. The projector turns off. HDMI 1 / MHL: - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 27
Setting an Access Password (Security Lock) You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector. When enabled, the password must be entered after you power on the projector. (See Navigating the OSD on page 23 and Setting the OSD Language on page 24 for - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 28
the Security Lock is enabled. Enter the password in the order you set it at step 6. In case you forget the password, please contact the service center. Service center will validate the owner and help reset the password. 15 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 29
Adjusting the Projector Level Take note of the following when setting up the projector: The projector table or stand should be level and sturdy. Position the projector so that it is perpendicular to the screen. Ensure the cables are in a safe location. You could trip over them. 1. To raise the - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 30
Adjusting Projected Image Position Using Lens Shift FOCUS ZOOM LENS SHIFT MENU EXIT ENTER SOURCE The Lens Shift feature provides a lens shift function that can be used to adjust the position of the projected image either horizontally or vertically within the range detailed below. Note: Do not - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 31
Adjusting the vertical image position The vertical image height can be adjusted between 141.2% and 104.65% for WXGA, 115.35% and 101.85% for XGA, 146.7% and 104.5% for 1080P, 132% and 99.1% for WUXGA of image height. Note that the maximum vertical image height adjustment can be limited by the - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 32
Screen Height PRO9530HDL Screen H H x 4.5% PRO9800WUL Distance (L) Screen H Screen Height H x 0.9% Distance (L) 104.5% offset 146.7% offset 99.1% offset 132% offset 19 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 33
Adjusting the horizontal image position With the lens in the center position the horizontal image position can be adjusted to the left or right by up to a maximum of 10.9% for WXGA, 3.8% for XGA, 10.3% for 1080P, 10.3% for WUXGA of the image width. Note that the maximum horizontal image height - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 34
Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom control (on the projector only) to resize the projected image and screen size. 2. Use the Image-focus control (on the projector only) to sharpen the projected image. 3. Press the / / / buttons (on the projector or the remote control) to - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 35
Adjusting the Volume 8. Press the / remote control. buttons on the The volume control appears on the display. 9. Press the / buttons on the remote control or ◄ / ► buttons on the keypad to adjust Volume +/-. 10.Press the button to turn off the volume (This feature is available only on - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 36
ON-SCREEN DISPLAY (OSD) MENU SETTINGS OSD Menu Controls The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 37
Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Basic. 2. Press the cursor ▲▼ button until Language is highlighted. 3. Press the cursor ◄► button until the language you want is highlighted. 4. - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 38
OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. MAIN MENU SUB MENU Image Color Mode Brilliant Color Brightness Contrast Sharpness Gamma Advanced Display Video / Audio Reset Horizontal Position Vertical Position Frequency Tracking - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 39
MAIN MENU SUB MENU Basic Language Projection Position Aspect Ratio My Button Splash Screen HV Keystone Advanced Reset Pattern Splash screen Screen Capture Security Lock Panel key lock Digital Zoom Presentation Timer Corner Adj. Projector ID Remote Control Code Timer Preset Time Timer Reset - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 40
MAIN MENU Advanced SUB MENU SETTINGS Quick Auto Search Auto Power Off (min.) Direct Power On High Altitude Lamp Mode Advanced Reset All Status OSD Menu Setting Menu Position Translucent Menu Menu Display Air Filter Timer Reset Lamp Hour Reset Low Power Mode Sleep Timer (min) 3D 3D 3D - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 41
Image Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings. ITEM Color Mode Brilliant Color Brightness Contrast Sharpness Gamma Advanced Reset - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 42
Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press (Enter) or ►. Press ▼▲ to move up and down in the Advanced menu. ITEM Color Temperature Color Management White Balance DESCRIPTION Press the cursor - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 43
Color Management Press (Enter) / ► to enter the Color Manager sub menu. ITEM Red Green Blue Cyan Magenta Yellow White DESCRIPTION Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Select to enter the Green Color Manager. Press the ◄► buttons to - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 44
White Balance Press the (Enter) / ► button to enter the White Balance sub menu. ITEM R Gain G Gain B Gain R Offset G Offset B Offset DESCRIPTION Press the ◄► buttons to adjust the Red Gain. Press the ◄► buttons to adjust the Green Gain. Press the ◄► buttons to adjust the Blue Gain. Press the ◄► - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 45
Display Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Display menu. Press the cursor ▲▼ button to move up and down in the Display menu. Press ◄► to change values for settings. ITEM DESCRIPTION Horizontal Position Press the cursor ◄► button to adjust - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 46
Video/Audio Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings. ITEM AGC Saturation Tint Overscan Closed Caption Audio Reset - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 47
Audio Press (Enter) / ► to enter the Audio sub menu. ITEM Volume Mute Active audio out DESCRIPTION Press the ◄► buttons to enter and adjust the audio volume. Press the ◄► buttons to enter and turn on or off the speaker. Press the ◄► buttons to select audio output connector. Note: When select Off, - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 48
Basic Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Basic menu. Press the cursor ▲▼ button to move up and down in the Basic menu. Press ◄► to change values for settings. ITEM Language Projection Position Aspect ratio My Button Splash screen HV Keystone - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 49
Splash screen Press (Enter) / ► to enter the Logo sub menu. ITEM Pattern Splash screen Screen Capture DESCRIPTION Press the ◄► buttons to select different Pattern Press the ◄► buttons to choose start up Logo. Press (Enter) / ► to capture screen on current display immediately. HV Keystone Press - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 50
Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Basic menu. Press ▲▼ to move to the Advanced menu and then press (Enter) or ►. Press ▲▼ to move up and down in the Advanced menu. Press ◄► to change values for setting. ITEM Security Lock Panel key lock Digital - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 51
Presentation Timer The Presentation Timer function can indicate the presentation time on the screen to help you achieve better time management when giving presentations. ITEM Timer Preset Time Timer Reset DESCRIPTION Press the cursor ◄► button to enable or disable presentation timer. Press the - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 52
Corner Adj. Press (Enter) / ► to enter the Corner Adj. sub menu. 1. Press the cursor ▲ / ▼ buttons to select a corner and press ENTER. 2. Press the cursor ▲ / ▼ buttons to adjust vertical and press the cursor ◄ / ► buttons to adjust horizontal. 3. Press MENU to save and Exit the settings. 39 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 53
Advanced Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Advanced menu. Press the cursor ▲▼ button to move up and down in the Advanced menu. ITEM Quick Auto Search Auto Power Off (min.) Direct Power On High Altitude Lamp Mode Advanced Reset All Status - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 54
3D settings. Press (Enter) / ► to enter the Network menu. See page 43 for more information on Network Setting. Note: About "On By Lan", RJ45 will support to be waked up in this mode(Under 6W) but scalar won't. Note: To enjoy the 3D function, first enable the Play Movie in 3D - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 55
OSD Menu Setting ITEM Menu Position Translucent Menu Menu Display DESCRIPTION Press ◄► button to select different OSD location. Press ◄► button to select OSD background translucent level. Press ◄► button to select OSD timeout delay. Lamp Hour Reset Please refer to Resetting the Lamp Time on page - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 56
3D ITEM 3D 3D Sync Invert 3D Format DESCRIPTION Press ◄► to select Off, DLP-Link or IR. Press ◄► to turn 3D Sync Invert On or Off. Press ◄► to enable or disable 3D Format. Network Setting ITEM Network State DHCP IP Address Subnet Mask Gateway DNS Apply DESCRIPTION Displays the network - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 57
types of external devices which can be connected to the LAN/RJ45 port and remote/control the projector, as well as the related control commands supporting for each external device, kindly please get contact with the Support-Service team directly. 44 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 58
LAN_RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). HDM I 1 / MH L HDM I 2 DV I-D Computer Ou t C omputer In 1 C omputer In 2 LA N US B 3D VE SA RS -232 R G B H V Wi re d In R emo te Ou t S- Vi de o Vi de o Audi o In L Servi ce MI C A udio Ou - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 59
3. Right-click on Local Area Connection, and select Properties. 4. In the Properties window, select the Networking tab, and select Internet Protocol (TCP/IP). 5. Click Properties. 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK. 46 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 60
7. Press the Menu button on the projector. 8. Select Advanced→ Advanced → Network Setting 9. After getting into Network Setting, input the following: DHCP: Off IP Address: 10.10.10.10 Subnet Mask: 255.255.255.0 Gateway: 0.0.0.0 DNS Server: 0.0.0.0 10. Press (Enter) / ► to confirm settings. - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 61
CATEGORY ITEM IP Address Crestron Control IP ID Port Projector Name Projector Location Assigned To DHCP (Enabled) IP Address Network Configuration Subnet Mask Default Gateway DNS Server Enabled User Password New Password Confirm Enabled Admin Password New Password Confirm For - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 62
Preparing Email Alerts 1. Make sure that user can access the homepage of LAN RJ45 function by web browser (for ex-ample, Microsoft Internet Explorer v6.01/v8.0). 2. From the Homepage of LAN/RJ45, click Alert Settings. 3. By default, these input boxes in Alert Settings are blank. 49 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 63
4. For Sending alert mail, input the following: SMTP field is the mail server for sending out email (SMTP protocol). This is a required field. To field is the recipient's email address (for example, the projector administrator). This is a required field. Cc field sends a carbon copy of the alert to - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 64
" communication by dedicated RS232 command control, there is alternative RS232 command control way, so called "RS232 by TELNET" for LAN/RJ45 interface. Quick Start-Guide for "RS232 by TELNET" Check and get the IP-Address on OSD of the projector. Make sure that laptop/PC can access the web-page - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 65
Input the command format like the below: telnet ttt.xxx.yyy.zzz 23 ("Enter" key pressed) (ttt.xxx.yyy.zzz: IP-Address of the projector) If Telnet-Connection ready, and user can have RS232 command input, then "Enter" key pressed, the RS232 command will be workable. How to have TELNET enabled in - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 66
"OK" button. Specsheet for "RS232 by TELNET" : 1. Telnet: TCP 2. Telnet port: 23 (for more detail, kindly please get contact with the service agent or team) 3. Telnet utility: Windows "TELNET.exe" (console mode) 4. Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 67
Status Press the cursor ▲▼ button to move up and down in the Advanced menu. Select the Status sub menu and press (Enter) / ► to enter the Status sub menu. ITEM Active Source Video Information Lamp Hours (Eco, Normal, Dynamic Eco) Software Version Serial Number Air filter hour DESCRIPTION Display - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 68
MAINTENANCE AND SECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer. Important: a. The projection lamp used in this product contains a small amount of - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 69
4. Unlock the lamp cover. 5. Pull up and remove the cover. 6. Use a screwdriver to remove the screws from the lamp module. 7. Pull out the lamp module. 56 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 70
8. Reverse steps 1 to 7 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module must sit securely in place and the lamp connector must be connected properly before tightening the screws. 57 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 71
Resetting the Lamp Time After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 2. Press the MENU button to open the OSD menu. 3. Press the cursor ◄► button to move to the Advanced menu. Press the cursor button to move down to Advanced. 4. Press the cursor - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 72
the projector to remove dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and If a lot of water gets into the projector interior when cleaning, have the projector serviced. Cleaning the Lens You can purchase optic lens cleaner from most camera stores. Refer to - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 73
Cleaning the Air Filter Refer to the following to clean the air filter. 1. Open the latch to open the filter door. 2. Remove the filter. 3. Use a vacuum cleaner to vacuum the dust inside. Note: 1. Use the soft brush attachment when you vacuum the filter to avoid damage it. 2. Do not wash the filter - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 74
Reset: Press MENU > Select Advanced >> Advanced and select Air Filter Timer Reset. Press (Enter) / ► to reset timer. Important: The Filter LED lights when the filter service time is on (1000 hours). If the filter is broken, please use a new one. 61 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 75
put erO ut ComputerIn 1 ComputerIn 2 LAN USB 3D VESA RS-232 R G B H V Wired InRem ote Out S-Video Audoi Video In L Audoi R DVI-D nI1 In2 In Audio Service MIC Out L R Audio Out 12V Out IR 62 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 76
parts. For example, if you replace batteries and the problem remains, put the original batteries back and go to the next step. Keep a record of the steps you take when troubleshooting: The information may be useful when calling for technical support or for passing on to service personnel. 63 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 77
for one (1) minute before restarting the projector. If the Power or Lamp LEDs are still blinking or the Over Temp LED is lit, contact your service center. 64 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 78
replaced the lamp recently, try resetting the lamp connections. 5. Replace the lamp module. 6. Put the old lamp back in the projector and have the projector serviced. Problem: The lamp goes off 1. Power surges can cause the lamp to turn off. Re-plug power cord. When the Power LED is on, press the - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 79
4. Check the battery polarity. 5. Replace the batteries. 6. Turn off other Infrared-enabled devices in the vicinity. 7. Have the remote control serviced. Audio Problems Problem: There is no sound 1. Adjust the volume on the remote control. 2. Adjust the volume of the audio source. 3. Check the audio - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 80
HDMI Q & A Q. What is the difference between a "Standard" HDMI cable and a "High-Speed" HDMI cable? Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or HighSpeed cables. ˙Standard (or "category 1") HDMI cables have been tested to perform at speeds of 75Mhz or up to 2. - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 81
1280x800 0.65" 1080P, S600 1920x1080p 0.67" WUXGA, S600HB 1920x1200 1 meters ~ 10 meters 22.3"~378.6" 20.7" ~ 351.7" 21.2" ~ 361.4" 21.8" ~ 371.4" Manual Focus/Manual Zoom 1.3-2.21 1.32 ~ 2.24 1.25~2.13 1.25~2.13 ±30° for ±30 steps ±25° for ±25 steps Front, Rear, Desktop/Ceiling (Rear - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 82
x 1 3D-Sync x 1 RS-232C x 1 RJ45 x 1 Screen Trigger : DC Jack x 1 (DC12V 200mA output function) Wired Remote In x 1 Wired Remote Out x 1 USB Type B for service x 1 Kensington Security Slot Security Bar Note: For questions regarding product specifications, please contact your local distributor. 69 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 83
Projection Distance vs. Projection Size PRO9510L / PRO9520WL / PRO9530HDL / PRO9800WUL (b) (a) (d) (c) (f) (e) (a) (c) (d) (e) (f) (b) (a) Screen Size [inch (m)] 26.7 30 40 50 60 70 80 90 100 120 150 200 250 300 378.6 (0.7) (0.8) (1.0) (1.3) (1.5) (1.8) (2.0) (2.3) (2.5) (3.0) (3.8) (5.1) - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 84
(b) (a) (d) (c) (f) (e) (a) (c) (d) (e) (f) (b) (a) Screen Size [inch (m)] 25.4 30 40 50 60 70 80 90 100 120 150 200 250 300 361.4 (0.6) (0.8) (1.0) (1.3) (1.5) (1.8) (2.0) (2.3) (2.5) (3.0) (3.8) (5.1) (6.4) (7.6) (9.2) PRO9530HDL (1080P) 16:9 image on a 16:9 Screen (b) Projection distance - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 85
Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. SIGNAL NTSC PAL/SECAM VESA RESOLUTION － － 720 x 400 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 * 800 x 600 800 x 600 800 x 600 800 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 86
60.0 50.0 24.0 25.0 30.0 50.0 60.0 COMPOSITE S_VIDEO COMPONENT RGB (ANALOG) HDMI (DIGITAL) O: Frequency supported -: Frequency not supported 3D note： "" It means the timing can support non-3D and 3D signal with Frame Sequential and TopBottom format. ""It means the timing can - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 87
7 4 FOCU S ZO OM LENS SHIF T 325.5mm(12.8" ) MENU EXI T ENTER SOURCE 445mm(17.5" ) Projector Dimensions - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 88
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 89
IR code table Key No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Key Power ON My Button COMP HDMI HDMI/MHL VIDEO BNC Source Auto SYNC Up /V keystone + Freeze Left /H keystone Enter Right H keystone + MENU Down/V keystone EXIT MOUSE Mouse Left - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 90
APPENDIX II RS-232C Protocol RS232 Setting Baud Rate Data Bits Parity Check Stop Bits Flow Control UART16550 FIFO 9600 8 None 1 None Disable Minimum delay for next command: 1ms Control Command Structure The command is structured by the Header code, command code, data code and end code. Most of - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 91
Command Group 01 ASCII HEX Function SXXG0101 53h Xh Xh 47h 30h 31h 30h 31h 0Dh Get Brightness SXXS0101n 53h Xh Xh 53h 30h 31h 30h 31h nh 0Dh Set Brightness SXXG0102 53h Xh Xh 47h 30h 31h 30h 32h 0Dh Get Contrast SXXS0102n 53h Xh Xh 53h 30h 31h 30h 32h nh 0Dh Set Contrast SXXG0103 53h Xh Xh - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 92
Command Group 02 ASCII HEX Function Description SXXS0201 53h Xh Xh 53h 30h 32h 30h 31h 0Dh Select RGB SXXS0202 53h Xh Xh 53h 30h 32h 30h 32h 0Dh Select RGB2 SXXS0203 53h Xh Xh 53h 30h 32h 30h 33h 0Dh Select DVI SXXS0204 53h Xh Xh 53h 30h 32h 30h 34h 0Dh Select Video SXXS0205 53h Xh Xh 53h - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 93
Command Group 03 ASCII HEX Function Description Return Value SXXG0307 53h Xh Xh 47h 30h 33h 30h 37h 0Dh Bass n=0~16 Pn/F SXXS0307n 53h Xh Xh 53h 30h 33h 30h 37h nh 0Dh Bass n=0~16 P/F SXXG0308 53h Xh Xh 47h 30h 33h 30h 38h 0Dh Projection Mode SXXS0308n 53h Xh Xh 53h 30h 33h 30h 38h nh - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 94
ASCII HEX Command Group 03 Function SXXG0319 53h Xh Xh 47h 30h 33h 31h 39h 0Dh Lamp Mode SXXS0319n 53h Xh Xh 53h 30h 33h 31h 39h 0Dh Lamp Mode SXXS0320 53h 39h 39h 53h 30h 33h 32h 30h 0Dh Logo Capture SXXG0321 53h 39h 39h 47h 30h 33h 32h 31h 0Dh Logo Select SXXS0321n 53h 39h 39h 53h 30h 33h - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 95
.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 [email protected] Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/support/call-desk/ Hong Kong www.hk.viewsonic.com T= 852 3102 2900 [email protected] India www.in.viewsonic.com T= 1800 419 0959 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 96
other acts of nature, improper maintenance, unauthorized product modification, or failure to follow instructions supplied with the product. b. Operation outside of product specifications. c. Operation of does not relate to a product defect. 3. Removal, installation, and set-up service charges. - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 97
(please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 98
modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. b. A ny damage service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 99
39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. STD Av Ferrocarril Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico FOR USA SUPPORT: ViewSonic Corporation 14035 Pipeline Ave. Chino, CA 91710, USA Tel: 800-688 - ViewSonic Pro9510L - 1024 x 768 Resolution 6 200 ANSI Lumens 1.3 - 2.21:1 Throw - Page 100
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
 |
 |
Pro9510L/Pro9520WL/
Pro9530HDL/Pro9800WUL
DLP Projector
User Guide
Model No. VS16505/VS16506/VS16507/VS16508
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”