ViewSonic Pro9510L PRO9510L User Guide English

ViewSonic Pro9510L Manual

Get ViewSonic Pro9510L PDF manuals and user guides View all ViewSonic Pro9510L manuals
Add to My Manuals
Save this manual to your list of manuals

ViewSonic Pro9510L manual content summary:

  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 1
    Pro9510L/Pro9520WL/ Pro9530HDL/Pro9800WUL DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 2
    . This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 3
    ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 4
    Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 5
    , please see the "Customer Support" section in this guide. Product Name: Model Number: Document Number: Serial Number: Purchase Date: For Your Records Pro9510L/Pro9520WL/Pro9530HDL/Pro9800WUL ViewSonic DLP Projector VS16505/VS16506/VS16507/VS16508 Pro9510L/Pro9520WL/Pro9530HDL/Pro9800WUL_UG_ ENG
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 6
    This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2016 Disclaimer The
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 7
    the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual there are no user-serviceable parts in the unit. For servicing, contact qualified service personnel.  Follow all warnings and cautions in this manual and on the
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 8
    is running, and the air intake and exhaust vents are unobstructed.  All enclosures should pass a certified thermal evaluation to ensure that the projector does not recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is with the acceptable operation
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 9
    cord. DO NOT remove the power cord during the shutdown process, as it may cause damage to the projector. In the meantime, the delayed heat radiating will also affect the service life of the projector. The shutdown process may vary depending on the model used. Whatever the case may be, be sure to
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 10
    installing and using the projector, read the regulatory notices in the Regulatory Compliance on page 75. Important Recycle Instructions: Lamp(s) inside this DISPOSAL: Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 11
     High brightness for projection in just about any environment.  Supports resolutions up to WUXGA for clear and crisp images.  DLP® security bar. About this Manual This manual is intended for end users and describes how to install and operate the DLP projector. Wherever possible, relevant
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 12
    the Lamp Time ...58 CLEANING THE PROJECTOR ...59 Cleaning the Lens...59 Cleaning the Case ...59 Cleaning the Air Filter ...60 USING THE PHYSICAL LOCK ...62 Using the Kensington Security Slot ...62 Using the Security Bar Lock ...62 TROUBLESHOOTING ...63 COMMON PROBLEMS AND SOLUTIONS ...63 TIPS FOR
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 13
    ERROR MESSAGES ...64 IMAGE PROBLEMS ...65 LAMP PROBLEMS...65 REMOTE CONTROL PROBLEMS...66 AUDIO PROBLEMS ...66 HAVING THE PROJECTOR SERVICED ...66 HDMI Q & A ...67 SPECIFICATIONS...68 SPECIFICATIONS ...68 PROJECTION DISTANCE VS. PROJECTION SIZE ...70 PRO9510L / PRO9520WL / PRO9530HDL / PRO9800WUL
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 14
    's Manual) Quick Start Guide Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It is recommend that you keep the original packing material should you ever need to return the equipment for warranty service. Caution: Avoid using the projector in
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 15
    cover to replace lamp. Rotate adjuster lever to adjust angle position. Projection Lens. Receives IR signal from remote control. Displays the projector status. Cool air intake. Adjusts the image position vertically. Adjusts the image position horizontally. Enlarges the projected image. Focuses the
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 16
    Display the power on/off sequence status. Display the lamp status. Display the thermal status. Display the filter replacing warning message. Turn the projector on or off. Opens and exits OSD menus. Navigates and changes settings in the OSD. Quick Menu - For Horizontal Keystone. Navigates and changes
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 17
    em ote Out S-Video Audio Video In L Audio R DV I-D In 1 In 2 In Audi o Service MIC Out L R Audi o Out 12V Out IR 24 2322212019 1817161514 13 ITEM LABEL 1. HDMI 1 cable for USB host. Note: Support 5V/1.0A for each port output as long as the projector Power On. Connect 3D IR glasses
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 18
    the connector before turn on/off the projector.  Screen controllers are supplied and supported by screen manufacturers.  Do not use Remote Out S-Video Audio Video In L Audio R D V I-D In 1 In 2 In Audio Service MIC Out L R Audio Out 12V Out IR 14 3 13 12 11 1. Composite Video Cable
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 19
    Mount Holes DESCRIPTION SEE PAGE Rotate adjuster lever to adjust angle position. 16 Contact your dealer for information on mounting the projector on a ceiling. Note: When installing, ensure that you use only UL Listed ceiling mounts. For ceiling installations, use approved mounting hardware
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 20
    , you can bounce the signal off certain reflective surfaces such as projector screens. 3. The buttons and keys on the projector have the same functions as the corresponding buttons on the remote control. This user's manual describes the functions based on the remote control. Note: Complies with
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 21
    MODE 21. 22. Laser 23. 24. HDMI / MHL 25. Source 26. BNC 27. Freeze DESCRIPTION SEE PAGE Transmits signals to projector. Turns the projector on. 12 Displays the HDMI 2 source. Displays the VGA1/VGA2 source selection (toggle). Displays the VIDEO/S-VIDEO source selection. Navigates and
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 22
    5 seconds or more. The initial code is set to1. When the code is switched to 8, the remote control can control every projector. Note: If different codes are set on the projector and remote control, there will be no response from the remote control. When that happens, switch the code for the remote
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 23
    the remote mouse control The capability of operating your computer with the remote control gives you more flexibility when delivering presentations. 1. Connect the projector to your PC or notebook with a USB cable prior to using the remote control in place of your computer's mouse. 2. Set the input
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 24
    . Caution: 1. Only use AAA batteries (Alkaline batteries are recommended). 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the batteries when not using the projector for prolonged periods. 11
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 25
    the remote control. The PWR LED will now flash green. The startup screen will display in approximately 30 seconds. The first time you use the projector, you can select your preferred language from quick menu after the startup screen display. (See Setting the OSD Language on page 24) See Setting an
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 26
    the SOURCE button and use ▲▼ to scroll among devices. (Component is supported through the RGB to Component adapter.) 4. When the "Power Off? /Press Power again" message appears, press the POWER button. The projector turns off.  HDMI 1 / MHL: High-Definition Multimedia Interface and Mobile High
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 27
    24 for help on using OSD menus.) Important: Keep the password in a safe place. Without the password, you will not be able to use the projector. If you lose the password, contact your reseller for information on clearing the password. 1. Press the MENU button to open the OSD menu. 2. Press the
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 28
    the Security Lock is enabled. Enter the password in the order you set it at step 6. In case you forget the password, please contact the service center. Service center will validate the owner and help reset the password. 15
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 29
    when setting up the projector:  The projector table or stand should be level and sturdy.  Position the projector so that it is perpendicular to the screen.  Ensure the cables are in a safe location. You could trip over them. 1. To raise the level of the projector, twist the adjusters counter
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 30
    Adjusting Projected Image Position Using Lens Shift FOCUS ZOOM LENS SHIFT MENU EXIT ENTER SOURCE The Lens Shift feature provides a lens shift function that can be used to adjust the position of the projected image either horizontally or vertically within the range detailed below. Note: Do not
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 31
    achieve the maximum vertical image position height detailed above if the horizontal image position is at maximum. PRO9520WL Screen H Screen Height H x 4.65% 104.65% offset PRO9510L Distance (L) Screen H Screen Height H x 1.85% Distance (L) 141.2% offset 101.85% offset 115.35% offset 18
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 32
    Screen Height PRO9530HDL Screen H H x 4.5% PRO9800WUL Distance (L) Screen H Screen Height H x 0.9% Distance (L) 104.5% offset 146.7% offset 99.1% offset 132% offset 19
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 33
    Adjusting the horizontal image position With the lens in the center position the horizontal image position can be adjusted to the left or right by up to a maximum of 10.9% for WXGA, 3.8% for XGA, 10.3% for 1080P, 10.3% for WUXGA of the image width. Note that the maximum horizontal image height
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 34
    only) to resize the projected image and screen size. 2. Use the Image-focus control (on the projector only) to sharpen the projected image. 3. Press the / / / buttons (on the projector or the remote control) to correct vertical or horizontal image-trapezoid . 4. The keystone control appears on
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 35
    Adjusting the Volume 8. Press the / remote control. buttons on the The volume control appears on the display. 9. Press the / buttons on the remote control or ◄ / ► buttons on the keypad to adjust Volume +/-. 10.Press the button to turn off the volume (This feature is available only on
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 36
    OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following illustration shows the corresponding buttons on the projector. MENU EXIT ENTER SOURCE 1. To enter the OSD, press the MENU button. 2. There are five
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 37
    Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Basic. 2. Press the cursor ▲▼ button until Language is highlighted. 3. Press the cursor ◄► button until the language you want is highlighted. 4.
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 38
    OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. MAIN MENU SUB MENU Image Color Mode Brilliant Color Brightness Contrast Sharpness Gamma Advanced Display Video / Audio Reset Horizontal Position Vertical Position Frequency Tracking
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 39
    key lock Digital Zoom Presentation Timer Corner Adj. Projector ID Remote Control Code Timer Preset Time Timer Reset 3D, Status, OSD Message, Projection Position. Off, Test Card, Note Pad, World map, Stave, Trellis chart ViewSonic, Off, Red, Green, Blue, User H: -25 ~ +25 V: -30 ~ +30 Off ,On Off
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 40
    MAIN MENU Advanced SUB MENU SETTINGS Quick Auto Search Auto Power Off (min.) Direct Power On High Altitude Lamp Mode Advanced Reset All Status OSD Menu Setting Menu Position Translucent Menu Menu Display Air Filter Timer Reset Lamp Hour Reset Low Power Mode Sleep Timer (min) 3D 3D 3D
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 41
    Image Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings. ITEM Color Mode Brilliant Color Brightness Contrast Sharpness Gamma Advanced Reset
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 42
    Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press (Enter) or ►. Press ▼▲ to move up and down in the Advanced menu. ITEM Color Temperature Color Management White Balance DESCRIPTION Press the cursor
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 43
    Color Management Press (Enter) / ► to enter the Color Manager sub menu. ITEM Red Green Blue Cyan Magenta Yellow White DESCRIPTION Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Select to enter the Green Color Manager. Press the ◄► buttons to
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 44
    White Balance Press the (Enter) / ► button to enter the White Balance sub menu. ITEM R Gain G Gain B Gain R Offset G Offset B Offset DESCRIPTION Press the ◄► buttons to adjust the Red Gain. Press the ◄► buttons to adjust the Green Gain. Press the ◄► buttons to adjust the Blue Gain. Press the ◄►
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 45
    Display Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Display menu. Press the cursor ▲▼ button to move up and down in the Display menu. Press ◄► to change values for settings. ITEM DESCRIPTION Horizontal Position Press the cursor ◄► button to adjust
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 46
    Video/Audio Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings. ITEM AGC Saturation Tint Overscan Closed Caption Audio Reset
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 47
    Audio Press (Enter) / ► to enter the Audio sub menu. ITEM Volume Mute Active audio out DESCRIPTION Press the ◄► buttons to enter and adjust the audio volume. Press the ◄► buttons to enter and turn on or off the speaker. Press the ◄► buttons to select audio output connector. Note: When select Off,
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 48
    Basic Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Basic menu. Press the cursor ▲▼ button to move up and down in the Basic menu. Press ◄► to change values for settings. ITEM Language Projection Position Aspect ratio My Button Splash screen HV Keystone
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 49
    Splash screen Press (Enter) / ► to enter the Logo sub menu. ITEM Pattern Splash screen Screen Capture DESCRIPTION Press the ◄► buttons to select different Pattern Press the ◄► buttons to choose start up Logo. Press (Enter) / ► to capture screen on current display immediately. HV Keystone Press
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 50
    down in the Advanced menu. Press ◄► to change values for setting. ITEM Security Lock Panel key lock Digital Zoom Presentation Timer Corner Adj. Projector ID Remote control code DESCRIPTION Press the cursor ◄► button to enable or disable security lock function. Press the cursor ◄► button to lock or
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 51
    Presentation Timer The Presentation Timer function can indicate the presentation time on the screen to help you achieve better time management when giving presentations. ITEM Timer Preset Time Timer Reset DESCRIPTION Press the cursor ◄► button to enable or disable presentation timer. Press the
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 52
    Corner Adj. Press (Enter) / ► to enter the Corner Adj. sub menu. 1. Press the cursor ▲ / ▼ buttons to select a corner and press ENTER. 2. Press the cursor ▲ / ▼ buttons to adjust vertical and press the cursor ◄ / ► buttons to adjust horizontal. 3. Press MENU to save and Exit the settings. 39
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 53
    Advanced Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Advanced menu. Press the cursor ▲▼ button to move up and down in the Advanced menu. ITEM Quick Auto Search Auto Power Off (min.) Direct Power On High Altitude Lamp Mode Advanced Reset All Status
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 54
    3D settings. Press (Enter) / ► to enter the Network menu. See page 43 for more information on Network Setting. Note: About "On By Lan", RJ45 will support to be waked up in this mode(Under 6W) but scalar won't. Note: To enjoy the 3D function, first enable the Play Movie in 3D
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 55
    OSD Menu Setting ITEM Menu Position Translucent Menu Menu Display DESCRIPTION Press ◄► button to select different OSD location. Press ◄► button to select OSD background translucent level. Press ◄► button to select OSD timeout delay. Lamp Hour Reset Please refer to Resetting the Lamp Time on page
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 56
    3D ITEM 3D 3D Sync Invert 3D Format DESCRIPTION Press ◄► to select Off, DLP-Link or IR. Press ◄► to turn 3D Sync Invert On or Off. Press ◄► to enable or disable 3D Format. Network Setting ITEM Network State DHCP IP Address Subnet Mask Gateway DNS Apply DESCRIPTION Displays the network
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 57
    / For more detail of information about the diverse types of external devices which can be connected to the LAN/RJ45 port and remote/control the projector, as well as the related control commands supporting for each external device, kindly please get contact with the Support-Service team directly. 44
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 58
    LAN_RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). HDM I 1 / MH L HDM I 2 DV I-D Computer Ou t C omputer In 1 C omputer In 2 LA N US B 3D VE SA RS -232 R G B H V Wi re d In R emo
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 59
    3. Right-click on Local Area Connection, and select Properties. 4. In the Properties window, select the Networking tab, and select Internet Protocol (TCP/IP). 5. Click Properties. 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK. 46
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 60
    7. Press the Menu button on the projector. 8. Select Advanced→ Advanced → Network Setting 9. After getting into Network Setting, input the following:  input the IP address: 10.10.10.10. 12. Press (Enter) / ►. The projector is setup for remote management. The LAN/RJ45 function displays as follows. 47
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 61
    CATEGORY ITEM IP Address Crestron Control IP ID Port Projector Name Projector Location Assigned To DHCP (Enabled) IP Address Network Configuration Subnet Mask Default Gateway DNS Server Enabled User Password New Password Confirm Enabled Admin Password New
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 62
    Preparing Email Alerts 1. Make sure that user can access the homepage of LAN RJ45 function by web browser (for ex-ample, Microsoft Internet Explorer v6.01/v8.0). 2. From the Homepage of LAN/RJ45, click Alert Settings. 3. By default, these input boxes in Alert Settings are blank. 49
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 63
    is the mail server for sending out email (SMTP protocol). This is a required field. To field is the recipient's email address (for example, the projector administrator). This is a required field. Cc field sends a carbon copy of the alert to the specified email address. This is an optional field (for
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 64
    way, so called "RS232 by TELNET" for LAN/RJ45 interface. Quick Start-Guide for "RS232 by TELNET" Check and get the IP-Address on OSD of the projector. Make sure that laptop/PC can access the web-page of the projector. Make sure that "Windows Firewall" setting to be disabled in case of
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 65
    Input the command format like the below: telnet ttt.xxx.yyy.zzz 23 ("Enter" key pressed) (ttt.xxx.yyy.zzz: IP-Address of the projector) If Telnet-Connection ready, and user can have RS232 command input, then "Enter" key pressed, the RS232 command will be workable. How to have TELNET
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 66
    "OK" button. Specsheet for "RS232 by TELNET" : 1. Telnet: TCP 2. Telnet port: 23 (for more detail, kindly please get contact with the service agent or team) 3. Telnet utility: Windows "TELNET.exe" (console mode) 4. Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 67
    Status Press the cursor ▲▼ button to move up and down in the Advanced menu. Select the Status sub menu and press (Enter) / ► to enter the Status sub menu. ITEM Active Source Video Information Lamp Hours (Eco, Normal, Dynamic Eco) Software Version Serial Number Air filter hour DESCRIPTION Display
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 68
    your local authority. Warning: Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to do so could If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come out of the exhaust vent. The gas contains toxic mercury
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 69
    4. Unlock the lamp cover. 5. Pull up and remove the cover. 6. Use a screwdriver to remove the screws from the lamp module. 7. Pull out the lamp module. 56
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 70
    8. Reverse steps 1 to 7 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module must sit securely in place and the lamp connector must be connected properly before tightening the screws. 57
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 71
    Resetting the Lamp Time After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 2. Press the MENU button to open the OSD menu. 3. Press the cursor ◄► button to move to the Advanced menu. Press the cursor button to move down to Advanced. 4. Press the cursor
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 72
    dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning 4. If a lot of water gets into the projector interior when cleaning, have the projector serviced. Cleaning the Lens You can purchase optic lens cleaner
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 73
    Cleaning the Air Filter Refer to the following to clean the air filter. 1. Open the latch to open the filter door. 2. Remove the filter. 3. Use a vacuum cleaner to vacuum the dust inside. Note: 1. Use the soft brush attachment when you vacuum the filter to avoid damage it. 2. Do not wash the filter
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 74
    . 5. Close the filter door and lock the latch. 6. Turn on the projector and reset the Air Filter Timer after the Air Filter is replaced. Air Filter / ► to reset timer. Important: The Filter LED lights when the filter service time is on (1000 hours). If the filter is broken, please use a new one. 61
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 75
    password protection function and the Kensington lock, the Security Bar Opening helps protect the projector from unauthorized use. See the following picture. HDMI 1/ MHL HDMI2 DVI-D Com S-Video Audoi Video In L Audoi R DVI-D nI1 In2 In Audio Service MIC Out L R Audio Out 12V Out IR 62
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 76
    parts. For example, if you replace batteries and the problem remains, put the original batteries back and go to the next step. Keep a record of the steps you take when troubleshooting: The information may be useful when calling for technical support or for passing on to service personnel. 63
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 77
    error 9 blinks OFF OFF OFF In the event of an error, please disconnect the AC power cord and wait for one (1) minute before restarting the projector. If the Power or Lamp LEDs are still blinking or the Over Temp LED is lit, contact your
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 78
    If you have replaced the lamp recently, try resetting the lamp connections. 5. Replace the lamp module. 6. Put the old lamp back in the projector and have the projector serviced. Problem: The lamp goes off 1. Power surges can cause the lamp to turn off. Re-plug power cord. When the Power LED is on
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 79
    . 2. Adjust the volume of the audio source. 3. Check the audio cable connection. 4. Test the source audio output with other speakers. 5. Have the projector serviced. Problem: The sound is distorted 1. Check the audio cable connection. 2. Test the source audio output with other speakers. 3. Have the
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 80
    HDMI Q & A Q. What is the difference between a "Standard" HDMI cable and a "High-Speed" HDMI cable? Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or HighSpeed cables. ˙Standard (or "category 1") HDMI cables have been tested to perform at speeds of 75Mhz or up to 2.
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 81
    Supply Power Consumption Lamp Audio Speaker Input Terminals PRO9510L PRO9520WL PRO9530HDL PRO9800WUL 0.7" XGA, S600HB 1024x768 ~ 10 meters 22.3"~378.6" 20.7" ~ 351.7" 21.2" ~ 361.4" 21.8" ~ 371.4" Manual Focus/Manual Zoom 1.3-2.21 1.32 ~ 2.24 1.25~2.13 1.25~2.13 ±30° for ±30 steps ±
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 82
    x 1 3D-Sync x 1 RS-232C x 1 RJ45 x 1 Screen Trigger : DC Jack x 1 (DC12V 200mA output function) Wired Remote In x 1 Wired Remote Out x 1 USB Type B for service x 1 Kensington Security Slot Security Bar Note: For questions regarding product specifications, please contact your local distributor. 69
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 83
    40.0 50.0 60.0 70.0 80.0 90.0 100.0 120.0 150.0 200.0 250.0 300.0 378.6 (0.7) (0.8) (1.0) (1.3) (1.5) (1.8) (2.0) (2.3) (2.5) (3.0) (3.8) (5.1) (6.4) (7.6) (9.6) PRO9510L (XGA) 4:3 image on a 4:3 Screen (b) Projection distance [m (inch)] min. max. (c) Image height [cm (inch)] --- 1.2 (47
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 84
    (b) (a) (d) (c) (f) (e) (a) (c) (d) (e) (f) (b) (e): Screen (f): Center of lens (a) Screen Size [inch (m)] 25.4 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100.0 120.0 150.0 200.0 250.0 300.0 361.4 (0.6) (0.8) (1.0) (1.3) (1.5) (1.8) (2.0) (2.3) (2.5) (3.0) (3.8) (5.1) (6.4) (7.6) (9.2) PRO9530HDL (
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 85
    can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. SIGNAL NTSC PAL/SECAM VESA RESOLUTION － － 720 x 400 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 * 800 x 600 800 x 600 800 x
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 86
    60.0 50.0 24.0 25.0 30.0 50.0 60.0 COMPOSITE S_VIDEO COMPONENT RGB (ANALOG) HDMI (DIGITAL) O: Frequency supported -: Frequency not supported 3D note： "" It means the timing can support non-3D and 3D signal with Frame Sequential and TopBottom format. ""It means the timing can
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 87
    7 4 FOCU S ZO OM LENS SHIF T 325.5mm(12.8" ) MENU EXI T ENTER SOURCE 445mm(17.5" ) Projector Dimensions
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 88
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 89
    IR code table Key No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Key Power ON My Button COMP HDMI HDMI/MHL VIDEO BNC Source Auto SYNC Up /V keystone + Freeze Left /H keystone Enter Right H keystone + MENU Down/V keystone EXIT MOUSE Mouse Left
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 90
    the Header code, command code, data code and end code. Most of the commands are structured except some for the compatibility issue with other projectors. HEX ASCII Header code 'V' Command code Data code End code Command Data 0Dh Command Data CR Operation Command Note: "CR" mean Carriage
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 91
    Command Group 01 ASCII HEX Function SXXG0101 53h Xh Xh 47h 30h 31h 30h 31h 0Dh Get Brightness SXXS0101n 53h Xh Xh 53h 30h 31h 30h 31h nh 0Dh Set Brightness SXXG0102 53h Xh Xh 47h 30h 31h 30h 32h 0Dh Get Contrast SXXS0102n 53h Xh Xh 53h 30h 31h 30h 32h nh 0Dh Set Contrast SXXG0103 53h Xh Xh
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 92
    Command Group 02 ASCII HEX Function Description SXXS0201 53h Xh Xh 53h 30h 32h 30h 31h 0Dh Select RGB SXXS0202 53h Xh Xh 53h 30h 32h 30h 32h 0Dh Select RGB2 SXXS0203 53h Xh Xh 53h 30h 32h 30h 33h 0Dh Select DVI SXXS0204 53h Xh Xh 53h 30h 32h 30h 34h 0Dh Select Video SXXS0205 53h Xh Xh 53h
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 93
    Command Group 03 ASCII HEX Function Description Return Value SXXS0307n 53h Xh Xh 53h 30h 33h 30h 37h nh 0Dh Bass n=0~16 P/F SXXG0308 53h Xh Xh 47h 30h 33h 30h 38h 0Dh Projection Mode SXXS0308n 53h Xh Xh 53h 30h 33h 30h 38h nh 0Dh Projection Mode SXXG0309 53h Xh Xh 47h 30h 33h 30h 39h 0Dh
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 94
    39h 53h 30h 33h 33h 30h n 0Dh Sleep Timer Description 0:Eco 1:Normal 2:Dynamic Eco 0:Eco 1:Normal 2:Dynamic Eco 0:ViewSonic 1:Off 2: Red 3:Green 4:Blue 5:User 0:ViewSonic 1:Off 2: Red 3:Green 4:Blue 5:User 0:Normal 1:High 0:Normal 1:High 0~120 0~120 Return Value Pn/F P/F P/F Pn/F P/F Pn/F P/F Pn
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 95
    http://www.viewsoniceurope.com/eu/support/call-desk/ Hong Kong www.hk.viewsonic.com T= 852 3102 2900 [email protected] India www.in.viewsonic.com T= 1800 419 0959 [email protected] Korea ap.viewsonic.com/kr/ T= 080 333 2131 [email protected] Latin America (Argentina
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 96
    ViewSonic office for the warranty information. Limited One (1) year Heavy Usage Warranty: Under heavy usage settings, where a projector local ViewSonic office follow instructions supplied anyone not authorized by ViewSonic. e. Any damage of or parts not meeting ViewSonic's specifications. i. Normal
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 97
    , contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 98
    modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. b. A ny damage service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 99
    39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico FOR USA SUPPORT: ViewSonic Corporation 14035 Pipeline Ave. Chino, CA 91710, USA Tel: 800-688-6688 (English
  • ViewSonic Pro9510L | PRO9510L User Guide English - Page 100
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Pro9510L/Pro9520WL/
Pro9530HDL/Pro9800WUL
DLP Projector
User Guide
Model No. VS16505/VS16506/VS16507/VS16508
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”