ViewSonic VB-WPS-003 ViewBoard Cast Button User Guide

ViewSonic VB-WPS-003 Manual

ViewSonic VB-WPS-003 manual content summary:

  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 1
    ViewBoard® Cast Button VB-WPS-001 & VB-WPS-003 User Guide Brugervejledning Handleiding Käyttöopas Manuel utilisateur Bedienungsanleitung Manuale utente Brukerveiledning Podręcznik użytkownika Guía del usuario Användarguide Kullanım Kılavuzu Panduan Pengguna Sổ hướng dẫn sử dụng
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 2
    • ViewSonic IFP/CDE series device(s) with vCastReceiver installed and activated. • VB-WPS-001: Device supports fully featured USB Type-C function that covers USB & DP. • VB-WPS-003: Device supports HDMI & USB Type-A. Pairing Windows PC and MacBook Pairing VB-WPS-001 Figure 1 VB-WPS-003 Figure
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 3
    4. The pairing dialogue box will pop up on your PC. Please enter the Network Name, Password, and the vCastReceiver IP address shown on the IFP/CDE device(s) home screen. 5. Click OK to complete the pairing of the ViewBoard® Cast Button and the IFP/CDE device(s) (Figure 3). Figure 3 6. Remove the
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 4
    Button into IFP/CDE device(s) to pair if the IFP/CDE device(s) is connected to a LAN (Ethernet cable). For VB-WPS-001: 1. Attach the USB Type C to USB Type A adapter to the VB-WPS-001 ViewBoard® Cast Button (Figure 7). 2. Then plug the ViewBoard® Cast Button into the IFP/ CDE device's USB port for
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 5
    For VB-WPS-003: 1. Plug the USB Type A cable into the IFP/CDE device's USB port for pairing. 2. A "Pairing" dialogue box will appear. 3. Enter the Network Name and Password, then select Save to pair (Figure 8). Figure 8 5
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 6
    Screen Sharing Figure 1 Figure 2 Figure 3 Figure 4 NOTE: Ensure the ViewBoard® Cast Button is plugged into your Windows PC/MacBook. 1. When the ViewBoard® Cast Button is connecting to your device, the LED indicator will be flashing blue. Your device is ready for screen sharing when the LED
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 7
    Regulatory and Service Information FCC Compliance Statement This device complies with part 15 of FCC radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 8
    Canadian Regulatory Statements This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 9
    Enhedskrav • Windows 7/8/10 • MacOS 10.10 eller nyere • ViewSonic IFP/CDE-serienheder med vCastReceiver installeret og aktiveret. • VB-WPS-001: Enheder der understøtter fuldt udstyret USB Type-C-funktioner på en USB- og DP-port. • VB-WPS-003: Enheder der understøtter HDMI & USB Type-A. Parring
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 10
    3. På pc - når programmet er blevet installeret - starter ViewBoard® Cast automatisk, når ViewBoard® Castknappen tilsluttes pc'en. 4. Parringsdialogboksen vises på din pc. Indtast netværksnavnet, adgangskoden og vCastReceiver IP-adressen, der vises på IFP/CDE-enhedernes startskærm. 5. Klik på OK for
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 11
    ® Cast-knappen i IFP/CDEenhederne for at parre dem, hvis IFP/CDE-enhederne er forbundet til et LAN-netværk (Ethernet-kabel). På VB-WPS-001: 1. Sæt USB Type C til USB Type A-adapteren på VBWPS-001 ViewBoard® Cast-knappen (figur 7). 2. Sæt derefter ViewBoard® Cast-knappen i IFP/CDEenhedens USB-port
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 12
    På VB-WPS-003: 1. Sæt USB Type A-kablet i IFP/CDE-enhedens USB- port, for at parre dem. 2. Herefter vises dialogboksen "Parring". 3. Indtast netværksnavn og adgangskode, og vælg derefter Save (Gem), for at parre dem (figur 8). Figur 8 12
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 13
    Skærmdeling Figur 1 Figur 2 Figur 3 Figur 4 BEMÆRK: Sørg for, at ViewBoard® Cast-knappen er sluttet til din Windows pc/MacBook. 1. Når ViewBoard® Cast-knappen opretter forbindelse til din enhed, blinker LED-indikatoren blåt. Din enhed er klar til deling af skærmen, når LEDindikatoren begynder,
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 14
    Oplysninger om service og lovgivning Overensstemmelseserklæring fra FCC Denne enhed overholder stk. 15 i FCC-reglerne. Driften er underlagt følgende to betingelser: (1) Denne enhed må ikke forårsage skadelig
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 15
    Canadiske lovmæssig erklæringer Denne enhed overholder Industry Canada licensfri RSS-standarderne Driften er underlagt følgende to betingelser: (1) Denne enhed må ikke forårsage interferens, og (2) denne enhed skal acceptere enhver interferens, også interferens der kan forårsage uønsket drift. CE-
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 16
    .10 of later • Appara(a)t(en) van de ViewSonic IFP/CDE-serie met vCastReceiver geïnstalleerd en geactiveerd. • VB-WPS-001: Apara(a)t(en) ondersteunt/ ondersteunen cover van USB- & DP-poort met USBtype C-functie met volledige functies. • VB-WPS-003: Appara(a)t(en) ondersteunt/ ondersteunen HDMI & USB
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 17
    3. Voor PC, met de toepassing geïnstalleerd, wordt ViewBoard® Cast automatisch gestart nadat de ViewBoard® Cast-knop is aangesloten op de PC. 4. Het dialoogvenster voor koppelen wordt weergegeven op uw PC. Voer de netwerknaam, het wachtwoord en het IP-adres van de vCastReceiver in dat wordt getoond
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 18
    -appara(a)t(en) om te koppelen als het IFP/CDE-appara(a)t(en) is verbonden met een LAN (Ethernetkabel). Voor VB-WPS-001: 1. Bevestig de USB Type-C naar USB Type-A-adapter aan de VB-WPS-001 ViewBoard® Cast-knop (Afbeelding 7). 2. Sluit vervolgens de ViewBoard® Cast-knop aan op de USB-poort van het
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 19
    NOOT: De USB Type-C naar USB Type-A-adapter is alleen voor koppelen van optioneel IFP/ CDE-apparaat. Voor VB-WPS-003: 1. Sluit de USB Type-A-kabel aan op de USB-poort van het IFP/CDE-appara(a)t(en) voor koppelen. 2. Een dialoogvenster "Koppelen" wordt weergegeven. 3. Voer de
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 20
    Scherm delen Afbeelding 1 Afbeelding 2 Afbeelding 3 Afbeelding 4 NOOT: Zorg ervoor dat de ViewBoard® Cast-knop is aangesloten op uw Windows PC/MacBook. 1. Wanneer de ViewBoard® Cast-knop verbinding maakt met uw apparaat, knippert het LEDindicatielampje blauw. Uw apparaat is klaar voor delen van
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 21
    Reglementaire en veiligheidsinformatie FCC-nalevingsverklaring Dit apparaat voldoet aan Deel 15 van de FCCvoorschriften. Gebruik is onderworpen aan de volgende twee voorwaarden: (1) dit apparaat mag geen schadelijke ruis veroorzaken en (2) dit apparaat dient ontvangen ruis te accepteren, inclusief
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 22
    Canadese wettelijke verklaringen Dit apparaat voldoet aan de licentie van de van Industry Canada vrijgestelde RSS-standaard(en). Gebruik is onderworpen aan de volgende twee voorwaarden: (1) dit apparaat mag geen schadelijke interferentie veroorzaken, en (2) dit apparaat moet enige interferentie
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 23
    • Windows 7/8/10 • MacOS 10.10 tai uudempi • ViewSonic IFP/CDE -sarjan laitteet vCastReceiver asennettuna ja aktivoituna. • VB-WPS-001: Laitteet tukevat kaikin ominaisuuksin varustettua USB Type-C toimintoa USB- ja DP-portilla. • VB-WPS-003: Laitteet tukevat HDMI:tä ja USB Type- A:ta. Pariutus
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 24
    4. Pariutusvalintaikkuna ponnahtaa esiin PC:ssä. Syötä verkkonimi, salasana ja vCastReceiver-IP-osoite, joka näkyy IFP/CDE-laitteiden aloitusnäytössä. 5. Napsauta OK suorittaaksesi ViewBoard® Cast -painikkeen ja IFP/CDE-laitteiden pariuttamisen loppuun (Kuva 3). Kuva 3 6. Irrota ViewBoard® Cast -
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 25
    Voit liittää ViewBoard® Cast -painikkeen myös IFP/CDElaitteisiin pariuttaaksesi, jos IFP/CDE-laitteet on liitetty LAN-verkkoon (Ethernet-kaapeli). VB-WPS-001: 1. Kiinnitä USB Type C - USB Type A -sovitin VBWPS-001 ViewBoard® Cast -painikkeeseen (Kuva 7). 2. Liitä sitten ViewBoard® Cast -painike IFP
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 26
    VB-WPS-003: 1. Liitä USB Type A -kaapeli IFP/CDE-laitteiden USB- porttiin paritusta varten. 2. A "Pairing (Pariutus)"-valintaikkuna tulee näkyviin. 3. Syötä verkkonimi ja salasana ja valitse sitten Save (Tallenna) pariuttaaksesi (Kuva 8). Kuva 8 26
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 27
    Näytön jakaminen Kuva 1 Kuva 2 Kuva 3 Kuva 4 HUOMAUTUS: Varmista, että ViewBoard® Cast -painike on liitetty Windows PC:hen/ MacBookiin. 1. Kun ViewBoard® Cast -painike on liitetty laitteeseesi, LED-merkkivalo vilkkuu sinisenä. Laitteesi on valmis näytön jakamiseen, kun LED-merkkivalo muuttuu
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 28
    Säädös- ja palvelutiedot FCC-yhdenmukaisuusilmoitus Laite on FCC-sääntöjen osan 15 mukainen. Laitteen käyttöä koskevat seuraavat kaksi ehtoa: (1) tämä laite saattaa aiheuttaa haitallista häiriötä, ja (2) tämän laitteen tulee vastaanottaa siihen tuleva häiriö, mukaan lukien häiriöt, joka voivat
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 29
    Kanadan lakisääteiset selonteot Tämä laite on Industry Canada -lisenssivapautus-RSSstandardien mukainen. Laitteen käyttöä koskevat seuraavat kaksi ehtoa: (1) Tämä laite ei aiheuta häiriötä, ja (2) tämän laitteen tulee hyväksyä siihen tuleva häiriö, mukaan lukien häiriö, joka voi aiheuttaa ei-
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 30
    10 • MacOS 10.10 ou ultérieur • Dispositif(s) ViewSonic série IFP/CDE avec vCastReceiver installé et activé. • VB-WPS-001 : Dispositif(s) prenant en charge l'intégralité de la fonction USB Type-C couvrant le port USB et DP. • VB-WPS-003 : Dispositif(s) prenant en charge HDMI et USB Type-A. Appairage
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 31
    3. Sur PC, avec l'application installée, ViewBoard® Cast se lance automatiquement une fois que le ViewBoard® Cast Button est branché dans le PC. 4. La boîte de dialogue d'appairage apparaît sur votre PC. Veuillez saisir le nom du réseau, le mot de passe et l'adresse IP vCastReceiver indiquée sur l'é
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 32
    si le(s) dispositif(s) IFP/CDE est/sont connecté(s) à un réseau local LAN (câble Ethernet). Sur VB-WPS-001 : 1. Raccordez l'adaptateur USB Type C vers USB Type A dans le ViewBoard® Cast Button VB-WPS-001 (Figure 7). 2. Puis branchez le ViewBoard® Cast Button dans le port USB du dispositif IFP/CDE
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 33
    REMARQUE : L'adaptateur USB Type C vers USB Type A est uniquement destiné à l'appairage d'un dispositif IFP/CDE optionnel. Sur VB-WPS-003 : 1. Branchez le câble USB Type A dans le port USB du dispositif IFP/CDE pour effectuer l'appairage. 2. Une boîte de dialogue « Pairing (Appairage) » apparaît. 3.
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 34
    Partage d'écran Figure 1 Figure 2 Figure 3 Figure 4 REMARQUE : Assurez-vous que le ViewBoard® Cast Button est branché dans votre PC Windows/MacBook. 1. Lorsque le ViewBoard® Cast Button se connecte à votre dispositif, l'indicateur LED clignote en bleu. Votre dispositif est prêt pour le partage
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 35
    Informations relatives à la règlementation et aux services Déclaration de conformité FCC Cet appareil est conforme à radiofréquences et, s'il n'est pas installé et utilisé conformément aux instructions, peut provoquer des interférences nuisibles aux communications radio. Cependant, nous ne pouvons
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 36
    Déclarations réglementaires pour le Canada Ce dispositif est conforme aux normes réglementaires CNR de Industrie Canada en matière d'exemption de licence. Son utilisation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit tolé
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 37
    7/8/10 • MacOS 10.10 oder aktueller • Gerät(e) der Serie ViewSonic IFP/CDE mit installiertem und aktiviertem vCastReceiver. • VB-WPS-001: Gerät(e) mit Unterstützung der kompletten USB-Type-C-Funktion mit USB- und DPAnschluss. • VB-WPS-003: Gerät(e) mit Unterstützung von HDMI und USB Type-A. Kopplung
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 38
    3. Bei einem PC mit installierter Anwendung startet ViewBoard® Cast automatisch, nachdem Sie den ViewBoard® Cast Button in den PC gesteckt haben. 4. Das Dialogfenster zur Kopplung wird an Ihrem PC eingeblendet. Bitte geben Sie Netzwerknamen, Kennwort und die am Startbildschirm des/der IFP/ CDE-Gerä
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 39
    7. Falls der ViewBoard® Cast Button gekoppelt wurde und Sie ihn mit einem anderen IFP/CDE-Gerät koppeln möchten, klicken Sie bitte unten rechts auf „Pairing-Switch Button (Tastenkopplung umschalten)" (Abbildung 5) und geben SIe zum erneuten Koppeln des ViewBoard® Cast Button erneut die
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 40
    /CDE-Gerät(e) einstecken, falls das/ die IFP/CDE-Gerät(e) mit einem LAN (Ethernet-Kabel) verbunden ist/sind. Beim VB-WPS-001: 1. Bringen Sie den USB-Type-C-zu-USB-Type-A-Adapter am VB-WPS-001 ViewBoard® Cast Button an (Abbildung 7). 2. Stecken Sie dann den ViewBoard® Cast Button zur Kopplung in den
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 41
    Beim VB-WPS-003: 1. Stecken Sie das USB-Type-A-Kabel zur Kopplung in den USB-Anschluss des IFP/CDE-Gerätes. 2. Ein Dialogfenster zur „Pairing (Kopplung)" wird angezeigt. 3. Geben Sie Netzwerknamen und Kennwort ein, wählen Sie dann zum Koppeln Save (Speichern) (Abbildung 8). Abbildung 8 41
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 42
    Bildschirmfreigabe Abbildung 1 Abbildung 2 Abbildung 3 Abbildung 4 Hinweis: Stellen Sie sicher, dass der ViewBoard® Cast Button in Ihren Windows-PC/Ihr MacBook eingesteckt ist.. 1. Wenn der ViewBoard® Cast Button mit Ihrem Gerät verbunden ist, blinkt die LED-Anzeige blau. Ihr Gerät ist zur
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 43
    Informationen zu Richtlinien und Service FCC-Erklärung Dieses Gerät erfüllt Teil 15 der FCC-Regularien. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: (1) Dieses Gerät darf keine Störungen
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 44
    Erklärungen zu kanadischen Richtlinien Dieses Gerät stimmt mit dem/den lizenzfreien RSSStandard(s) von Industry Canada überein. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: (1) Dieses Gerät darf keine Störungen verursachen, und (2) dieses Gerät muss jegliche empfangenen Störungen
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 45
    .10 o versione successiva • Dispositivi serie IFP/CDE ViewSonic con vCastReceiver installati e attivati. • VB-WPS-001: I dispositivi supportano USB e porta DP con coperchio per funzione USB tipo C copertura con tutte le funzioni. • VB-WPS-003: I dispositivi supportano HDMI e USB tipo A. Associazione
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 46
    3. Per PC, con l'applicazione installata, ViewBoard® Cast viene avviato automaticamente dopo aver inserito ViewBoard® Cast Button nel PC. 4. La finestra di dialogo di associazione appare sul PC. Immettere nome di rete, password e indirizzo IP di vCastReceiver visualizzati nella schermata iniziale
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 47
    ® Cast Button nei dispositivi IFP/CDE per eseguire l'associazione se i dispositivi IFP/CDE sono connessi a una LAN (cavo Ethernet). Per VB-WPS-001: 1. Collegare l'adattatore USB tipo C - USB tipo A a VBWPS-001 ViewBoard® Cast Button (Figura 7). 2. Quindi, inserire ViewBoard® Cast Button nella porta
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 48
    Per VB-WPS-003: 1. Inserire il cavo USB tipo A nella porta USB del dispositivo IFP/CDE per l'associazione. 2. Vene visualizzata la finestra di dialogo "Pairing (Associazione)". 3. Immettere nome rete e password, quindi selezionare Save (Salva) per associare (Figura 8). Figura 8 48
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 49
    Condivisione dello schermo Figura 1 Figura 2 Figura 3 Figura 4 NOTA: Assicurarsi che ViewBoard® Cast Button sia collegato al PC Windows/MacBook. 1. Quando si collega ViewBoard® Cast Button al dispositivo, il LED lampeggia in blu. Il dispositivo è pronto per la condivisione dello schermo quando
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 50
    Informazioni sulle normative e per la riparazione Dichiarazione di conformità FCC Questo dispositivo è conforme alla parte 15 delle norme FCC. Il funzionamento è soggetto alle seguenti due condizioni: (1) Questo dispositivo non può provocare interferenze dannose; (2) questo dispositivo deve
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 51
    Conformità alle norme canadesi Questo dispositivo è conforme alle norme RSS esenti da licenza Industry Canada. Il funzionamento è soggetto alle seguenti due condizioni: (1) Questo dispositivo non può provocare interferenze dannose e (2) Questo dispositivo deve accettare tutte le interferenze
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 52
    later • ViewSonic IFP/CDE series device(s) with vCastReceiver installed and activated. • VB-WPS-001: Device(s) supports fully-featured USB Type-C function cover USB & DP port. • VB-WPS-003: Device(s) support HDMI & USB Type-A. Paring Windows-PC og MacBook Norsk VB-WPS-001 Figur 1 VB-WPS-003 Figur
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 53
    4. Dialogboksen for paring vises på PC-en. Angi nettverksnavnet, passordet og vCastReceiver-IPadressen som vises på hjem-skjermen til IFP/CDEenheten(e). 5. Klikk OK for å fullføre paringen av ViewBoard® Castknappen og IFP/CDE-enhetene (figur 3). Figur 3 6. Ta ut ViewBoard® Cast-knappen, og koble den
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 54
    å koble ViewBoard® Cast-knappen til IFP/ CDE-enheten(e) for å pare dem hvis IFP/CDE-enhetene er koblet til et LAN (Ethernet-kabel). For VB-WPS-001: 1. Koble USB Type C til USB Type A-adapteren til VBWPS-001 ViewBoard® Cast-knappen (figur 7). 2. Koble deretter ViewBoard® Cast-knappen til USBporten
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 55
    For VB-WPS-003: 1. Koble USB Type A-kabelen til USB-porten på IFP/ CDE-enheten for paring. 2. Dialogboksen for Pairing (paring) vises. 3. Angi nettverksnavn og passord, og velg deretter Save (Lagre) for å pare (figur 8). Figur 8 55
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 56
    Skjermdeling Figur 1 Figur 2 Figur 3 Figur 4 MERKNAD: Sørg for at ViewBoard® Cast-knappen er koblet til en Windows-PC/MacBook. 1. Når ViewBoard® Cast-knappen kobles til enheten din, blinker LED-indikatoren. Enheten er klar for skjermdeling når LED-indikatoren går over til å lyse blått (figur
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 57
    Regulatorisk og serviceinformasjon FCC-samsvarserklæring Denne enheten samsvarer med del 15 i FCC-reglene. Bruk er underlagt følgende to betingelser: (1) Denne enheten skal ikke forårsake skadelig interferens, og (2) denne enheten må godta all mottatt interferens, inkludert interferens som kan forå
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 58
    Forskriftsmessige erklæringer for Canada Denne enheten er i samsvar med Industry Canadas lisensfritatt(e) RSS-standard(er). Bruk er underlagt følgende to betingelser: (1) Denne enheten må ikke forårsake forstyrrelse, og (2) denne enheten må godta all forstyrrelse, inkludert forstyrrelser som kan for
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 59
    • MacOS 10.10 lub wersja nowsza • Urządzenie(a) serii ViewSonic IFP/CDE z zainstalowanym i uaktywnionym vCastReceiver. • VB-WPS-001: Urządzenie(a) obsługuje w pełną funkcjonalność portu USB typu C, obejmującą port USB i DP. • VB-WPS-003: Urządzenie(a) obsługuje HDMI i USB typu A. Parowanie Parowanie
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 60
    3. Dla komputera PC, z zainstalowaną aplikacją, aplikacja ViewBoard® Cast uruchomi się automatycznie po podłączeniu ViewBoard® Cast Button do komputera PC. 4. W komputerze PC wyświetlone zostanie okno dialogowe parowania. Wprowadź Network Name (Nazwa sieci), Password (Hasło) i adres IP vCastReceiver
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 61
    7. Jeśli urządzenie ViewBoard® Cast Button została sparowane i wymagane jest jego sparowanie z innym urządzeniem IFP/CDE, kliknij "Pairing-Switch Button (Przycisk przełączenia parowania)" w dolnym prawym rogu (Rysunek 5), a następnie wprowadź ponownie informacje o sieci w celu ponownego sparowania
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 62
    (ń) IFP/CDE w celu sparowania, jeśli urządzenie(a) IFP/CDE jest podłączone do sieci LAN (kabel Ethernet). Dla VB-WPS-001: 1. Podłącz adapter USB typu C do USB typu A do urządzenia VB-WPS-001 ViewBoard® Cast Button (Rysunek 7). 2. Następnie podłącz urządzenie ViewBoard® Cast Button do portu USB urz
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 63
    Dla VB-WPS-003: 1. Podłącz kabel USB typu A do portu USB urządzenia(ń) IFP/CDE w celu wykonania parowania. 2. Pojawi się okno dialogowe "Pairing (Parowanie)": 3. Wprowadź Network Name (Nazwa
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 64
    Udostępnianie ekranu Rysunek 1 Rysunek 2 Rysunek 3 Rysunek 4 UWAGA: Upewnij się, że ViewBoard® Cast Button jest podłączony do komputera PC z systemem Windows/MacBook. 1. Po podłączeniu hen the ViewBoard® Cast Button do swojego urządzenia, zacznie migać niebieskim światłem wskaźnik LED.
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 65
    Informacje prawne i serwisowe Oświadczenie o zgodności z FCC To urządzenie jest zgodne z częścią 15 przepisów FCC. Jego działanie podlega następującym dwóm warunkom: (1) to urządzenie nie może powodować szkodliwych zakłóceń oraz (2) to urządzenie musi akceptować wszystkie odbierane zakłócenia, włą
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 66
    Oświadczenia dotyczące przepisów kanadyjskich To urządzenie jest zgodne z przepisami Industry Canada w odniesieniu do braku konieczności uzyskiwania licencji zgodności ze standardem(i) RSS. Jego działanie podlega następującym dwóm warunkom: (1) urządzenie to nie może powodować szkodliwych zakłóceń
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 67
    • MacOS 10.10 ViewSonic IFP/CDE vCastReceiver. • VB-WPS-001 USB Type-C USB и DP. • VB-WPS-003 HDMI и USB Type-A. Windows и MacBook VB-WPS-001 Рис. 1 VB-WPS-003 Рис. 2 1 ViewBoard® Cast к ПК Windows или MacBook VB-WPS-001 USB Type C (Рис. 1). • Для VB-WPS-003 HDMI и USB Type
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 68
    3 ViewBoard® Cast ViewBoard® Cast. 4 Network Name Password IP-адрес vCastReceiver IFP/CDE. 5 OK ViewBoard® Cast IFP/CDE (Рис. 3). Рис. 3 6 ViewBoard® Cast 4). Рис. 4 68
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 69
    7 ViewBoard® Cast IFP/CDE Pairing-Switch 5 ViewBoard® Cast (Рис. 6 ViewBoard Рис. 5 Рис. 6 69
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 70
    ViewBoard IFP/CDE ViewBoard® Cast IFP/CDE IFP/CDE Ethernet). Для VB-WPS-001: 1 USB Type C - USB Type A к ViewBoard® Cast на VB-WPS-001 (Рис. 7). 2 ViewBoard® Cast к порту USB IFP/CDE Рис. 7 USB Type C - USB Type A IFP/CDE. 70
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 71
    Для VB-WPS-003: 1 USB Type A USB IFP/CDE 2 Pairing" 3 Network Name Password Save 8). Рис. 8 71
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 72
    Рис. 1 Рис. 2 Рис. 3 Рис. 4 ViewBoard® Cast Windows/ MacBook. 1 ViewBoard® Cast 1). 2 ViewBoard® Cast 2). 3 IFP/CDE 3 и 4). 72
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 73
    C FCC 15 1 2 B 15 FCC. 73
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 74
    RSS 1 2 2014/30/EC 2014/35/EC 2012/19/EC (WEEE 74
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 75
    10 o posterior • Dispositivos de la serie IFP/CDE de ViewSonic con vCastReceiver instalado y activado. • VB-WPS-001: Los dispositivos son compatibles con la cubierta de función USB Tipo-C con todas las funciones y el puerto USB y DP. • VB-WPS-003: Los dispositivos son compatibles con HDMI y USB Tipo
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 76
    3. Para PC, con la aplicación instalada, ViewBoard® Cast se iniciará automáticamente después de que el botón ViewBoard® Cast se conecte a su PC. 4. Aparecerá el cuadro de diálogo de asociación n su PC. Escriba el nombre de red, la contraseña y la dirección IP de vCastReceiver que se muestran en la
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 77
    7. Si el botón ViewBoard® Cast se ha asociado y desea asociarlo con otro dispositivo IFP/CDE, haga clic en el "botón de asociación y cambio" situado en la esquina inferior derecha (figura 5) y vuelva a especificar la información de red para asociar de nuevo el botón ViewBoard® Cast (figura 6). Despu
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 78
    CDE para realizar la asociación si dichos dispositivos están conectados a una red LAN (cable Ethernet). Para VB-WPS-001: 1. Conecte el adaptador de USB Tipo C a USB Tipo A al botón ViewBoard® Cast VB-WPS-001 (figura 7). 2. Luego, conecte el botón ViewBoard® Cast al puerto USB del dispositivo IFP/CDE
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 79
    Para VB-WPS-003: 1. Enchufe el cable USB Tipo A al puerto USB del dispositivo IFP/CDE para realizar la asociación. 2. Aparecerá el cuadro de diálogo "Pairing (Asociación)". 3. Escriba
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 80
    Uso compartido de la pantalla Figura 1 Figura 2 Figura 3 Figura 4 NOTA: Asegúrese de que el botón ViewBoard® Cast esté conectado a su PC con Windows o MacBook. 1. Cuando el botón ViewBoard® Cast se conecte al dispositivo, el indicador LED parpadeará en azul. El dispositivo está listo para
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 81
    Información reglamentaria y de servicio Declaración de cumplimiento de las normas FCC Este dispositivo cumple el Apartado 15 de las normas FCC. El funcionamiento está sujeto a las siguientes dos condiciones: (1) este dispositivo no deberá causar interferencias perjudiciales y (2) este dispositivo
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 82
    Declaraciones de normativas canadienses Este dispositivo cumple los estándares RSS de exención de licencia de Industry Canada. El funcionamiento está sujeto a las siguientes dos condiciones: (1) Este dispositivo no debe causar interferencias, y (2) Este dispositivo debe aceptar cualquier
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 83
    Enhetskrav • Windows 7/8/10 • MacOS 10.10 eller senare • ViewSonic IFP/CDE-serienheter med vCastReceiver installerad och aktiverad. • VB-WPS-001: Enheter stöder fullt utrustade USB Type- C-funktionskåpa USB- och DP-port. • VB-WPS-003: Enheter stöder HDMI och USB Type-A. Parkoppling Windows PC och
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 84
    4. Dialogrutan för parkoppling visas på din dator. Ange nätverksnamn, lösenord och vCastReceiver IP-adress som visas på IFP/CDE-enhetens hemskärm. 5. Klicka på OK för att slutföra parkopplingen av ViewBoard® Cast-knappen och IFP/CDE-enheterna (figur 3). Figur 3 6. Ta bort ViewBoard® Cast-knappen och
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 85
    också ansluta ViewBoard® Cast-knappen till IFP/ CDE-enheter för att parkoppla om IFP/CDE-enheterna är anslutna till ett LAN (Ethernet-kabel). För VB-WPS-001: 1. Anslut USB Type C till USB Type A-adaptern till VBWPS-001 ViewBoard® Cast-knappen (figur 7). 2. Anslut sedan ViewBoard® Cast-knappen i IFP
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 86
    För VB-WPS-003: 1. Anslut USB Type A-kabeln till IFP/CDE-enhetens USB-port för parkoppling. 2. En dialogruta för "Pairing (Parkoppling)" visas. 3. Ange nätverksnamn och lösenord och välj sedan Save (Spara) för att parkoppla (figure 8). Figur 8 86
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 87
    Skärmdelning Figur 1 Figur 2 Figur 3 Figur 4 OBS! Se till att ViewBoard® Cast-knappen är ansluten till din Windows dator/MacBook. 1. När ViewBoard® Cast-knappen ansluts till din enhet kommer LED-indikatorn att blinka blått. Din enhet är redo för skärmdelning när LED-indikatorn ändras till
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 88
    Information om regler och service Uttalande gällande FCC-efterlevnad Denna enhet överensstämmer med avsnitt 15 i FCCreglerna. Användningen är underställd följande två villkor: (1) Enheten får inte orsaka skadliga störningar
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 89
    Kanadensiska meddelanden Den här enheten överensstämmer med Industry Canadalicens - undantaget RSS-standard(er). Användningen är underställd följande två villkor: (1) Enheten får inte orsaka störningar och (2) Denna enhet måste acceptera alla störningar, inklusive störningar som kan orsaka oönskad
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 90
    7/8/10 • MacOS 10.10 veya üzeri • vCastReceiver yüklü ve etkinleştirilmiş ViewSonic IFP/ CDE serisi cihazlar. • VB-WPS-001: Cihazlar, tam özellikli USB Type-C işlev kapağı USB ve DP bağlantı noktasını destekler. • VB-WPS-003: Cihazlar HDMI ve USB Tip A'yı destekler. Eşleştirme Windows PC ve MacBook
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 91
    4. PC'nizde eşleştirme iletişim kutusu açılır. Lütfen IFP/ CDE cihazların ana ekranında gösterilen Ağ Adı, Şifre ve vCastReceiver IP adresini girin. 5. ViewBoard® Yayın Düğmesi ve IFP/CDE cihazlarının eşleştirilmesini tamamlamak için OK (Tamam) düğmesine tıklayın (Şekil 3). Şekil 3 6. ViewBoard® Yay
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 92
    LAN'a (Ethernet kablosu) bağlıysa, eşleştirmek için ViewBoard® Yayın Düğmesini IFP/CDE cihazlarına da takabilirsiniz. VB-WPS-001 için: 1. USB Tip C - USB Tip A adaptörünü VB-WPS-001 ViewBoard® Yayın Düğmesine takın (Şekil 7). 2. Ardından, eşleştirmek için ViewBoard® Yayın Düğmesini IFP/CDE cihaz
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 93
    VB-WPS-003 için: 1. Eşleştirmek için, ViewBoard® Yayın Düğmesini IFP/ CDE cihazının USB bağlantı noktasına takın. 2. "Pairing (Eşleşiyor)" iletişim kutusu görüntülenir. 3. Ağ Adını
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 94
    Ekran Paylaşımı Şekil 1 Şekil 2 Şekil 3 Şekil 4 NOT: ViewBoard® Yayın Düğmesinin Windows PC/ MacBook'unuza takılı olduğundan emin olun. 1. ViewBoard® Yayın Düğmesi cihazınıza bağlanırken, LED göstergesi mavi renkte yanıp sönecektir. LED göstergesi statik maviye dönüştüğünde cihazınız ekran
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 95
    Düzenleyici Bilgiler ve Hizmet Bilgileri FCC Uyumluluk Bildirimi Bu aygıt, FCC Kuralları kısım 15'e uygundur. Kullanım aşağıdaki iki koşula bağlıdır: (1) Bu aygıt zararlı girişime neden olamaz ve (2) bu aygıt istenmeyen çalışmaya neden olabilen girişim dahil olmak üzere alınan her türlü girişimi
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 96
    Kanada Yasal Beyanları Bu aygıt, Kanada Endüstri lisansına (RSS standartları hariç) uygundur. Kullanım aşağıdaki iki koşula bağlıdır: (1) bu aygıt girişime neden olamaz ve (2) bu aygıt aygıtın istenmeyen çalışmasına neden olabilen girişim dahil olmak üzere her türlü girişimi kabul etmelidir. Avrupa
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 97
    10 • MacOS 10.10 atau lebih baru • Perangkat seri IFP/CDE ViewSonic dengan vCastReceiver terpasang dan aktif. • VB-WPS-001: Perangkat mendukung penutup fungsi USB Tipe-C berfitur lengkap USB & port DP. • VB-WPS-003: Perangkat mendukung HDMI & USB Tipe-A Pemasangan Pemasangan Windows PC dan MacBook
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 98
    4. Kotak dialog pemasangan akan muncul pada PC Anda. Silahkan masukkan nama Jaringan, Kata Ssandi, dan alamat IP vCastReceiver yang ditunjukkan pada layar utama perangkat IFP/CDE. 5. Klik OK untuk menyelesaikan pemasangan ViewBoard® Cast Button dan perangkat IFP/CDE (Gambar 3). Gambar 3 6. Lepaskan
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 99
    dapat menyambungkan ViewBoard® Cast Button ke perangkat IFP/CDE untuk pemasangan jika perangkat IFP/CDE dihubungkan ke LAN (kabel Ethernet) Untuk VB-WPS-001: 1. Pasang adapter USB Tipe C ke USB Tipe A pada VBWPS-001 ViewBoard® Cast Button (Gambar 7). 2. Lalu sambungkan ViewBoard® Cast Button pada
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 100
    Untuk VB-WPS-003: 1. Sambungkan kabel USB Tipe A pada port USB perangkat IFP/CDE untuk pemasangan. 2. Kotak dialog "Pemasangan" akan muncul. 3. Masukkan Nama dan Kata Sandi Jaringan, lalu pilih Save (Simpan) untuk pemasangan (Gambar 8). Gambar 8 100
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 101
    Berbagi Layar Gambar 1 Gambar 2 Gambar 3 Gambar 4 NOTE: Pastikan ViewBoard® Cast Button tersambung pada PC Windows/MacBook Anda. 1. Saat ViewBoard® Cast Button terhubung pada perangkat Anda, indikator LED akan berkedip biru. Perangkat Anda siap untuk berbagi layar ketika indikator LED berubah
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 102
    Informasi Peraturan dan Servis Pernyataan Kesesuaian FCC Perangkat ini sesuai dengan pasal 15 Peraturan FCC. Pengoperasian harus memenuhi dua kondisi sebagai berikut: (1) perangkat ini tidak boleh menimbulkan interferensi berbahaya, dan (2) perangkat ini harus menerima semua interferensi yang
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 103
    Pernyataan Peraturan Kanada Perangkat ini sesuai dengan lisensi Kanada Industri, dengan mengecualikan standar RSS. Pengoperasian harus memenuhi dua kondisi sebagai berikut: (1) perangkat ini tidak boleh menyebabkan interferensi, dan (2) perangkat ini harus menerima semua interferensi, termasuk
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 104
    ViewSonic IFP/CDE đã cài đặt và kích hoạt vCastReceiver. • VB-WPS-001: (Các) thiết bị hỗ trợ cổng USB & DP bao gồm chức năng USB Type-C hoạt động đầy đủ. • VB-WPS-003: (Các) thiết bị hỗ trợ cổng HDMI & USB Type-A. Ghép nối Ghép nối máy tính Windows và MacBook Tiếng Việt VB-WPS-001 Hình 1 VB-WPS
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 105
    4. Hộp thoại ghép nối sẽ bật lên trên máy tính. Hãy nhập Tên mạng, Mật khẩu và địa chỉ IP vCastReceiver hiển thị trên màn hình chính của (các) thiết bị IFP/CDE. 5. Nhấp OK để hoàn tất quy trình kết nối Nút ViewBoard® Cast và (các) thiết bị IFP/CDE (Hình 3). Hình 3 6. Tháo Nút ViewBoard® Cast và cắm
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 106
    ® Cast vào (các) thiết bị IFP/CDE để ghép nối nếu đã kết nối (các) thiết bị IFP/CDE với mạng LAN (cáp ethernet). Đối với VB-WPS-001: 1. Cắm bộ chuyển đổi USB Type C to USB Type A vào Nút ViewBoard® Cast của VB-WPS-001 (Hình 7). 2. Sau đó cắm Nút ViewBoard® Cast vào cổng USB trên thiết bị IFP/CDE
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 107
    Đối với VB-WPS-003: 1. Cắm cáp USB Type A vào cổng USB trên thiết bị IFP/ CDE để ghép nối. 2. Hộp thoại "Ghép nối" sẽ hiển thị. 3. Nhập Tên mạng và Mật khẩu, sau đó chọn Save (Lưu) để ghép nối (Hình 8). Hình 8 107
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 108
    Chia sẻ màn hình Hình 1 Hình 2 Hình 3 Hình 4 NOTE: Đảm bảo đã cắm Nút ViewBoard® Cast vào máy tính Windows/MacBook. 1. Khi Nút ViewBoard® Cast đang kết nối với thiết bị của bạn, đèn báo LED sẽ nhấp nháy màu xanh lam. Thiết bị của bạn đã sẵn sàng chia sẻ màn hình khi đèn báo LED chuyển sang màu
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 109
    Thông tin quy định và dịch vụ Tuyên bố tuân thủ FCC Thiết bị này tuân thủ phần 15 của Quy định FCC. Hoạt động của thiết bị phải tuân thủ hai điều kiện sau: (1) thiết bị này có thể không gây nhiễu sóng có hại, và (2) thiết bị này phải chấp nhận mọi hiện tượng nhiễu sóng thu được, kể cả nhiễu sóng có
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 110
    Tuyên bố pháp lý của Canada Thiết bị này tuân thủ (các) tiêu chuẩn RSS miễn giấy phép của Canada. Hoạt động của thiết bị phải tuân thủ hai điều kiện sau: (1) thiết bị này không gây nhiễu và (2) thiết bị này phải chấp nhận các hiện tượng nhiễu, bao gồm cả hiện tượng nhiễu mà có thể làm cho thiết bị
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 111
    7/8/10 • MacOS 10.10 vCastReceiver 的 ViewSonic IFP/CDE VB-WPS-001 USB Type-C USB 和 DP VB-WPS-003: 支援 HDMI 和 USB Type-A 配對 Windows PC 和 MacBook 配對 VB-WPS-001 圖 1 VB-WPS-003 圖 2 1. 將 ViewBoard® Cast Button 插入 Windows PC 或 MacBook VB-WPS-001 USB Type C 1)。 • VB-WPS-003 HDMI 輸出和 USB Type
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 112
    4. PC IFP/CDE vCastReceiver IP 位址。 5. 按一下 OK ViewBoard® Cast Button 與 IFP/CDE 3)。 圖 3 6. 移除 ViewBoard® Cast Button 4)。 圖 4 112
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 113
    ® Cast Button(圖 6 ViewBoard® Cast Button 圖 5 圖 6 ViewBoard IFP/CDE 配對 如果 IFP/CDE LAN ViewBoard® Cast Button 插入 IFP/CDE VB-WPS-001: 1. 將 USB Type C 轉 USB Type A VB-WPS-001 ViewBoard® Cast Button(圖 7)。 2. 然後將 ViewBoard® Cast Button 插入 IFP/CDE 裝置 的 USB 圖 7 注意:USB Type C 轉 USB Type A IFP
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 114
    VB-WPS-003: 1. 將 USB Type A 線插入 IFP/CDE 裝置的 USB 連接埠 2 3 Save 8)。 圖 8 114
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 115
    螢幕分享 圖 1 圖 2 圖 3 圖 4 ViewBoard® Cast Button 已插入 Windows PC/MacBook。 1. ViewBoard® Cast Button LED LED 1)。 2. 輕觸 ViewBoard® Cast Button LED 2)。 3. 如果 LED IFP/CDE 3 和 4)。 115
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 116
    FCC FCC 規則第 15 1 2 FCC 規則第 15 B 協助。 116
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 117
    Industry Canada RSS 1 2 CE EMC 指令 2014/30/EU 2014/35/EU 2012/19/EU (WEEE 117
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 118
    10 • MacOS 10.10 vCastReceiver 的 ViewSonic IFP/CDE VB-WPS-001: 支持USB和DP Type-C VB-WPS-003: 支持 HDMI 和 USB Type-A 配对 Windows PC 和 MacBook 配对 简体中文 VB-WPS-001 图 1 VB-WPS-003 图 2 1. 将 ViewBoard® Cast Button 插入 Windows PC 或 MacBook VB-WPS-001 USB Type C 1)。 • VB-WPS-003 HDMI 输出和 USB Type
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 119
    4. PC IFP/CDE vCastReceiver IP 地址。 5. 单击 OK ViewBoard® Cast Button 与 IFP/CDE 3)。 图 3 6. 移除 ViewBoard® Cast Button 4)。 图 4 119
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 120
    IFP/CDE 5 ViewBoard® Cast Button(图 6 ViewBoard® Cast Button 图 5 图 6 ViewBoard IFP/CDE 配对 如果 IFP/CDE LAN ViewBoard® Cast Button 插入 IFP/CDE VB-WPS-001: 1. 将 USB Type C 转 USB Type A VBWPS-001 ViewBoard® Cast Button(图 7)。 2. 然后将 ViewBoard® Cast Button 插入 IFP/CDE 设备 的 USB 图 7 注:USB Type
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 121
    VB-WPS-003: 1. 将 USB Type A 线插入 IFP/CDE 设备的 USB 端口进 2 3 Save 8)。 图 8 121
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 122
    屏幕分享 图 1 图 2 图 3 图 4 ViewBoard® Cast Button 已插入 Windows PC/MacBook。 1. ViewBoard® Cast Button LED LED 1)。 2. 轻触 ViewBoard® Cast Button LED 2)。 3. 如果 LED IFP/CDE 3 和 4)。 122
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 123
    FCC FCC 规则第 15 1 2 FCC 规则第 15 B 助。 123
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 124
    Industry Canada RSS 1 2 CE EMC 指令 2014/30/EU 2014/35/EU 2012/19/EU (WEEE 124
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 125
    10/8/7‬‬ 10.10 series ViewSonic IFP / CDE vCastReceiver ‫• ‪ :VB-WPS-001 C ‫• ‪ :VB-WPS-003 A‬‬ MacBook‬‬ ‫‪VB-WPS-003‬‬ ‫‪VB-WPS-001‬‬ 2‬‬ 1‬‬ ‫‪ -1 ViewBoard® Cast MacBook VB-WPS-001 C 1‬‬ VB-WPS-003 A 2‬‬ ‫‪ -2 ViewBoard® Cast ViewBoard Cast
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 126
    ‫‪ -4 IP vCastReceiver ‫‪. IFP / CDE 5 ViewBoard® Cast‬‬ IFP / CDE 3‬‬ 3‬‬ ‫‪ -6 ViewBoard® Cast 4‬‬ 4‬‬
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 127
    ‫‪ -7 ViewBoard® Cast IFP / CDE 5 ViewBoard® Cast 6 ViewBoard® Cast 6‬‬ 5‬‬ ViewBoard IFP/CDE‬‬ ViewBoard® Cast IFP / CDE IFP / CDE LAN VB-WPS-001‬‬ ‫‪ -1 C A VB-WPS-001 ViewBoard® Cast 7‬‬ ‫‪ -2 ViewBoard® Cast IFP / CDE 7‬‬ C A IFP / CDE‬‬
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 128
    VB-WPS-003 1 A ‫‪ IFP / CDE 2 3 8‬‬ 8‬‬
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 129
    2‬‬ 1‬‬ 4‬‬ 3‬‬ ViewBoard® Cast MacBook ‫‪ -1 ViewBoard® Cast 1‬‬ ‫‪ -2 ViewBoard® Cast Button 2‬‬ ‫‪ -3 IFP / CDE 3‬و ‪.)4‬‬
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 130
    15 15 1 2
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 131
    2.4 2412 2462 FCC 65 RSS ‫(‪ )1 ‫(‪ )2 65
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 132
    mobiles. La distance de séparation minimale est de 65mm.‬‬ CE EU / 2014/30 EU/35/2014‬‬ https://www.viewsonicglobal.com/public/products‬‬ ‫_‪download/safety_compliance/IFP/VB-WPS-001 VB-WPS-003_CE_DOC.pdf‬‬ 2012/19/EU (WEEE
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 133
    Customer Service For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product's serial number. Country/ Region Australia 中国 (China) Hong Kong (English) Indonesia 日本 (Japan)
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 134
    Europe www.viewsonic. com/eu/ France Deutschland www.viewsonic. com/de/ Россия www.viewsonic. com/ru/ España Türkiye www.viewsonic. com/tr/ United Kingdom www.viewsonic. com/uk/ Website www.viewsonic. com/fr/ www.viewsonic. com/kz/ www.viewsonic. com/es/ www.viewsonic. com/ua
  • ViewSonic VB-WPS-003 | ViewBoard Cast Button User Guide - Page 135
    Process Color C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Spot Color Spot Color Pantone Black C Pantone 187 C
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135

ViewBoard® Cast Button
VB-WPS-001 & VB-WPS-003
User Guide
Brugervejledning
Handleiding
Käyttöopas
Manuel utilisateur
Bedienungsanleitung
Manuale utente
Brukerveiledning
Podręcznik użytkownika
Руководство пользователя
Guía del usuario
Användarguide
Kullanım Kılavuzu
Panduan Pengguna
Sổ hướng dẫn sử dụng
使用指南
使用指南
ستخدم
±
ال
²
دلي