ViewSonic ViewPad 10pi ViewPad 10PI User Guide (English)
ViewSonic ViewPad 10pi Manual
View all ViewSonic ViewPad 10pi manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic ViewPad 10pi manual content summary:
- ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 1
ViewPad 10pi User Guide Model No. VS14406 - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 2
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 3
. 14. Always power off the ViewPad to install or remove external devices that do not support hot-plug. 15. Disconnect the ViewPad from an electrical outlet and power off before cleaning the ViewPad. 16. DO NOT disassemble the ViewPad, only a certified service technician should perform repair. 17 - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 4
logo are registered trademarks of the Wireless Fidelity Alliance. SD, SDHC are trademarks of SD Card Association. Bluetooth and the Bluetooth logo Purchase Date: ViewPad 10pi VS14406 ViewPad 10pi_UG_ENG Rev. 1A 09-02-11 Product disposal at end of product life ViewSonic respects the environment - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 5
Battery 6 Memory Card 7 Touch Panel Setup 7 Connect to a wireless networks 8 Bluetooth 9 Chapter 3: Cellular Data Network (3G Data) Setup 11 Starting Wireless Manager 11 PIN 12 PUK 12 Multiple Profiles 13 Settings 15 Auto Start 16 SIM 16 Radio 17 Networks 21 Connection 23 Wireless - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 6
AC adapter with power cord • User Guide and Driver CD • Quick Start Guide • An system recovery disk QVuieicwkPSatdar1t0Gpui ide User Guide and Installation Software ViewPad Series Tablet Microsoft® Windows® 7 Professional For distribution only with a new ViewSonic® PC. This disc contains 32-bit - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 7
. 3. Webcam A built-in webcam that allows you to capture images, record videos, and chat online. 4. Vents Dissipate heat and keep your ViewPad at an optimal temperature. 5. Speakers Produces sounds from multimedia files or the operating system. 6. Rear camera(Optional) You can take photos at - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 8
output jack 10. USB ports 11. Memory card slot 12. 3G SIM card slot(Optional) 13. Docking connector 14. MIC 15. Lock switch 16. Reset eject hole Navigation, Control Buttons The external buttons have different function in different OS. Button Icon Location Function in Windows ANDROID Home Menu - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 9
Function; Press and hold for 10 seconds: Touch panel Calibration Turn Power indicator 2. Battery status indicator 3.Wireless LAN indicator When battery is in charging, it lights up in red. When the battery is low, it flashes in red. When the battery is fully charged, it lights up in blue. When WiFi - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 10
should be performed by an authorized ViewSonic service center. Please contact local ViewSonic customer service for more information. Charging Battery The new battery is only partially charged out of box. To fully charge the battery, please follow the below instruction. 1. Connect one end of the AC - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 11
Memory Card SD memory card provides additional data storage space. To install SD/SDHC card 1. Open card door. 2. Insert SD/SDHC card following the indicative mark. 3. Close the card door. To remove the SD/SDHC card 1. For safe removal, go to Windows task bar and right mouse click on icon. Select - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 12
: You can also calibrate the touch panel by pressing and hold the Back button for 10 seconds until the battery indicator flashes in red. Connect to a wireless networks 1. Make sure you are located within the wireless network service area. Press the Wi-Fi button to turn on Wi-Fi, and the Wi-Fi - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 13
devices to find this computer, and click OK. So, other Bluetooth devices can find your ViewPad and make the Bluetooth connection. (You also need to activate the Bluetooth connection feature of the The maximum effective range of connection between your ViewPad and the Bluetooth device is about - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 14
4. Select a Bluetooth device and click Next. 5. Windows generates a random code number shown on the screen. Type in this code number into the Bluetooth device your ViewPad is trying to connecting to. 10 - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 15
connections on your ViewPad. When you open Wireless Manager, the Wireless Manager main window is displayed. The main window provides important status information and allows you to connect and disconnect. At Windows desktop, tap on icon to open Wireless Manager. If Wireless Manager is running but no - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 16
PIN When starting the Wireless Manager, you may need to enter a PIN for your SIM card to continue. Enter your PIN in the field and then click OK. Refer to your network subscription for PIN information. PUK You are allowed a limited - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 17
from unauthorized use. If you change your PIN, the module will still work with another SIM card.. Multiple Profiles A SIM card can have multiple pre-defined profiles. The first time the Wireless Manager starts, a dialog will appear with a question prompting you to set a connection profile. Select - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 18
and provides information about your current Mobile Broadband Connection (for example, signal strength and service type). From the Wireless Manager Main Window it is also possible to open the following Wireless applications or Help: • SMS link. Opens the SMS Utility. • Help link. Opens the help - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 19
in the status window. The status window is visible when the mouse pointer is held over the status icon in the Windows notification area. Connecting may also have a dedicated APN enabling data to pass directly from the service provider to the corporate servers. Usage The Usage section tab enables you - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 20
Automatically launch Wireless Manager at Microsoft Windows startup. Click Apply after changing the Auto Start settings. Advanced Settings Further settings can be found by clicking Advanced...: • SIM • Radio • Profiles • Networks • Connection SIM Most SIM cards are protected by a Personal Identity - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 21
Keep radio state during sleep/hibernate The radio can be always on, even when the ViewPad is in power saving mode. Choose between Yes and No. CAUTION! Within areas where no networks where available, and if supported by current subscription, otherwise switches to 2G. This is the recommended setting. - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 22
enter search mode until 3G coverage is found. 2G(GSM) The Mobile Broadband Module will only use 2G service where available. It may limit your possibility to fully use the Wireless Manager applications. Frequency Band It is possible to choose which frequency band/bands to use for mobile communication - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 23
or to a corporate network. A profile is the same for all services: 2G and 3G. Obtain the APN, user name and password and manually select the profile. Multiple Profiles may be available for your SIM card. If you later insert a different network operator's SIM card in your ViewPad and start Wireless - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 24
the profile by clicking Save. NOTE! The new profile settings will be used the next time you connect. Deleting a Profile 1. Select the Manual selection option from Profile Selection. 2. Select the profile you want to delete from the Profile list. 3. Click Delete. Modifying a Profile 1. Select the - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 25
the list of networks. Viewing Available Networks 1. If connected, click the Disconnect button. 2. Switch the Mobile Networks Selection mode to Manual Selection. 3. Update the list by clicking Update list. When the search is completed, the networks that are currently available are displayed. 21 - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 26
3G networks NOTE! If you select a 2G network but the service provider also has 3G services, then the Mobile Broadband Module will switch to the 3G network automatically. Selecting Another Network 1. Set the Selection Mode to Manual. 2. Click Update List. 3. When the search is completed, the networks - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 27
Connection The Connection tab contains information about the connection. Autoconnect It is possible to set Wireless Manager to connect automatically at Microsoft Windows startup, when resuming from sleep/hibernate and after turning on the Mobile Broadband device through the WWAN switch. Autoconnect - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 28
section tab displays system and program version information for your Mobile Broadband Module and Wireless Manager software. System Information By clicking System Info the System Information window is displayed containing information about the mobile broadband system. The Copy to clipboard button - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 29
Your Mobile Broadband connection will be terminated when you exit Wireless Manager. Closing the Wireless Manager window will not exit the Wireless Manager application. NOTE! Radio will be kept on after exiting the Wireless Manager. If you wish to manually turn the radio off before exiting, see Radio - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 30
it may cause an error on the next power up. 2. In Windows 7, click Start>Shutdown> or push the button to power off. Note 1: Windows can be configured to automatically shut down by single press. Please use Windows help & support (Keyword "Power") for more power configuration information. Note 2: Hard - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 31
files, Windows Accessories, ViewSonic ViewTools and Support documentation. The ViewTools menu includes powerful utilities such as vsPresenter, which lets you log on to your ViewSonic projector. ViewSonic has made it easy to integrate your ViewPad with your ViewSonic projector, to deliver your tablet - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 32
rating or incorrect plug. Use AC power adapter provided with this device. 2.Using USB. This device does not support USB battery charging. Multi Touch not working 1. Using Windows 7 Starter or Basic Upgrade OS to Windows 7 (Single touch only) Home Premium or higher. 2. Application is not - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 33
-3757 T= 65 6461 6044 [email protected] [email protected] [email protected] [email protected] ap.viewsonic.com/za/ Contact your reseller [email protected] www.viewsoniceurope. com/uk/ www.viewsonic.com www.viewsoniceurope.com/uk/ support/call-desk/ T (Toll-Free - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 34
for an extended period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the web site and Customer Support pages). You will need to provide your - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 35
information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. Card. For users in Europe and Russia, full details of warranty provided can be found in www.viewsoniceurope.com under Support/Warranty Information. 4.3: ViewSonic - ViewSonic ViewPad 10pi | ViewPad 10PI User Guide (English) - Page 36
ViewPad 10pi
User Guide
Model No. VS14406