Viking RDDFF236SS Installation Instructions - Page 10

Leveling/Adjusting the Door To enhance the appearance and maintain performance, the refrigerator should be level. To protect property and refrigerator from damage, observe the following: • Protect vinyl or other flooring with cardboard, rugs, or other protective material. • DO NOT use power tools when performing leveling procedure. Materials Needed • 1/4" hex head driver • Carpenter's level Note: Complete any required panel installation and/or water supply connection before leveling. Refrigerator should be in permanent location prior to leveling. 1 2 Remove toe grille. Grasp firmly and pull outward to unclip. 3 To raise the front of the refrigerator, turn the leveler foot screw clockwise. Note: Having someone push against the top of the refrigerator takes some weight off the leveler foot screws. 4 To lower the front of the refrigerator, turn the leveler foot screw counterclockwise. Note: Having someone push against the top of the refrigerator takes some weight off the leveler foot. This makes it easier to turn the levelers. It may take several turns of the leveler foot screw to adjust the tilt of the refrigerator. Replace toe grill. Align the toe grille mounting clips with the lower cabinet slots. Push the toe grille firmly until it snaps into place. Check for level. 18 Complete the Installation Final Steps 1. Plug into a grounded 3 prong outlet. 2. Return all removable parts to doors and drawer and food to refrigerator and freezer. Note: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow three days to completely fill the ice container. 19