Viking RDDFF236SS Side Trim Kit - Installation Instructions

Viking RDDFF236SS Manual

Add to My Manuals
Save this manual to your list of manuals

Viking RDDFF236SS | Side Trim Kit - Installation Instructions - Page 1
Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com F21022 EN Freestanding Refrigeration Side Trim, Side Panel, Top Panel & Grille
Viking RDDFF236SS | Side Trim Kit - Installation Instructions - Page 2
Specifications Freestanding Refrigerators Description VCFF/RDDFF236 with side panels/tops/grilles Overall width with side panels Overall height with tops/grilles Cutout width with side panels Cutout height with tops/grilles
Viking RDDFF236SS | Side Trim Kit - Installation Instructions - Page 3
inches. Shim trim has adhesive backing on both sides. Remove adhesive backing on refrigerator side only. Fit the shim trim to the front of the unit first. the top of the grille assembly. Press the side trim into the refrigerator cabinet at the center location. 4 Installation - Side Panel, Top
Viking RDDFF236SS | Side Trim Kit - Installation Instructions - Page 4
panel will have a cutout. 6 2 1 2 Pull the machine cover off and slip back of side panel between refrigerator cabinet and machine cover. Install machine cover screws back into refrigerator cabinet. NOTE: The holes on the side panel are clearance holes. Remove adhesive backing from other side