Viking VGIC53616B LP/Propane Conversion Kit - Installation Instructions
Viking VGIC53616B Manual
View all Viking VGIC53616B manuals
Add to My Manuals
Save this manual to your list of manuals |
Viking VGIC53616B manual content summary:
- Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 1
Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 F20525E EN LPKPDR - Universal LP Conversion Kit for Professional & Designer Ranges/Rangetops (041414) - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 2
Sealed Type 2 8 Designer Range & Rangetop 9 Orifice Locations hazard. IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE instructions. -If you cannot reach your gas supplier, call the fire department. • Installation and service must be performed by a qualified installer, service - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 3
service at 1-888-845-4641. 4 Regulator Conversion Flip Cap Hex Nut Cap • Sealed Surface Burner Models Identify regulator type from rear of range and grate support from far left side of range/rangetop. LP" on opposite side. Reverse regulator cap and reinstall with LP side facing upward for LP - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 4
all grates, burner bowls, grate supports, surface burner caps, griddle, grill grates and grill grate supports. NOTE: Some models may not the surface burner orifices. This can prevent the orifices from falling into the range during removal. Replace the venturi (Item #1) and hand tighten. Repeat steps - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 5
burner orifices. This can prevent the orifices from falling into the range during removal. Reverse procedure as needed to reassemble. IMPORTANT: For burner orifices. This can prevent the orifices from falling into the range during removal. Reverse procedure as needed to reassemble. IMPORTANT: For - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 6
(more depth) or clockwise (less depth). Reconnect igniter wire and reinstall burner. Repeat steps until all surface burners have been converted. Reinstall all grates, grate supports and burner bowls. 11 - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 7
Griddle Conversion (for models equipped with griddle) U-Shape Burner with Spark Ignition Air Shutter Air Shutter Set Screw Orifice Hood Locate bag labeled Griddle Orifice. Remove screws securing griddle venturi plate to griddle box and remove griddle venturi plate. Remove screws securing griddle - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 8
" griddles. Reverse procedures as needed to reassemble. 14 Grill Conversion (for models equipped with grill) Lift flavor grids from unit. Lift flavor grid support from unit. Remove screws securing rear bracket to burner box. Remove screws securing flame shield to burner box. Lift out left and right - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 9
(more depth) or clockwise (less depth). Reverse procedures as needed to reassemble. 16 Bake Conversion "L" Shaped Remove oven racks and rack supports. Remove oven bottom by sliding toward rear of range, then lift upward. Remove screws securing toe grille to unit. Remove screws securing burner - Viking VGIC53616B | LP/Propane Conversion Kit - Installation Instructions - Page 10
Hood Remove oven racks and rack supports. Remove oven bottom. Remove screws to reassemble. 18 Rating Label Locations When LP/Propane conversion is complete, complete the enclosed conversion can be found as follows: Professional Open Burner Range & Rangetop - On the interior left side of the burner
F20525E EN
(041414)
Viking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-845-4641
Installation Guide
LPKPDR - Universal LP Conversion Kit for
Professional & Designer Ranges/Rangetops