Viking VWH3610SS Specs
Viking VWH3610SS Manual
 |
View all Viking VWH3610SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Viking VWH3610SS manual content summary:
- Viking VWH3610SS | Specs - Page 1
for custom venting-separate on/off switch allows you to leave ventilator at favorite/most-used setting Model numbers PROFESSIONAL WALL HOODS, 10"H./21"D. • VWH2410-24"W. o Recommended for use with 24"W. non-griddle/grill ranges (for larger equipment, use 18"H. hood) • VWH3010-30"W. o Recommended - Viking VWH3610SS | Specs - Page 2
-safe stainless steel mesh filters are easily removed for quick cleaning (frame and mesh are stainless steel) Model numbers DESIGNER 6" WALL HOODS, 6"H./20"D. • DWH3006-30"W. o Recommended for use with 30"W. non-griddle/grill ranges, 30"W. non-griddle/grill rangetops, and 30"W. cooktops • DWH3606-36 - Viking VWH3610SS | Specs - Page 3
conversion kits, filters, duct covers, backsplashes, and warming shelf panels. VENTILATION Built-In 10"H. Wall Hood w/Ventilator/ 12"H. Chimney Wall Hood w/Ventilator/ Dimensions & Specifications PRODUCT DIMENSIONS VWH Professional Wall Hood (301.52"cm) DCH Designer Chimney Wall Hood (301.52 - Viking VWH3610SS | Specs - Page 4
DWH Designer Replacement Wall Hood (5.12"cm) A DESIGNER (502.80"cm) (15.62"cm) Model DWH3006 DWH3606 Hood Width (A) Height 29-7/8" (75.9 cm) 6" (15.24 cm) 35-7/8" (91.1 cm) 6" (15.24 cm) Lights 2 2 PLANNING AND DESIGN GUIDE VIKINGRANGE.COM • 1-888-VIKING1 Filters 2 2 Heat Lamps - Viking VWH3610SS | Specs - Page 5
(913.46"cm) ((6611967675""t..mmo63 accinmmx..)) 33((783063""..t28mmoccaimmnx.)). PROFESSIONAL DESIGNER CHIMNEY HOOD (913.46"cm) (651(134764""0t.mmo8cacminmx)..) 22((756138""..mt36moaccimmxn..))* DESIGNER REPLACEMENT WALL HOOD *Note: When installing with a 24" high-shelf, the 27" (68.6 cm - Viking VWH3610SS | Specs - Page 6
Wall Hood w/Ventilator/ 12"H. Chimney Wall Hood w/Ventilator 6"H. Wall Hood w/Ventilator VWH Professional Wall Hood DCH Designer Chimney Wall Hood DWH Designer Replacement Wall Hood Proper installation Model 5.6 5.6 5.6 5.6 PLANNING AND DESIGN GUIDE VIKINGRANGE.COM • 1-888-VIKING1 REVISED 5/2/ - Viking VWH3610SS | Specs - Page 7
Wall Hood w/Ventilator 6"H. Wall Hood w/Ventilator % Installation Notes & Accessories Recirculating Hood Conversion Kits • Stainless Steel (SS) • For use with VWH & DCH models only • Eliminates ducting • Kit includes o Two charcoal filters o Installation hardware o Top vent/grille • Professional - Viking VWH3610SS | Specs - Page 8
limited warranty-all ventilator motors (Professional and Designer) • Ninety-day limited warranty-cosmetic parts such as glass, painted, and decorative items (Professional and Designer) * For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM
•
1-888-VIKING1
REVISED 5/2/11
© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE
VENTILATION
Built-In 10”H. Wall Hood w/Ventilator/
12”H. Chimney Wall Hood w/Ventilator/
All models include
• Heavy-duty construction
o Virtually seamless stainless steel
design with no visible screws
• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels
• Recommended for 24”W., 30”W. &
36”W. non-griddle/grill ranges,
rangetops, and cooktops
• Two 50-watt halogen lights with
dimmer control
o Power switch and dimmer control
are separate, allowing you to leave
dimmer at favorite position
• Easy cleanup
o Design of low-profile filter system
means less interior hood space to
be cleaned
o Canopy interior is completely lined
in stainless steel for increased
rigidity, seamless appearance, and
easy cleaning
Professional 10”H. hoods include
• Commercial-type size, design, and styling
• Commercial-type baffle filter system
efficiently removes grease and heated
vapors from the air; especially designed
for use with commercial-type products
• 460 CFM interior-power ventilator
comes standard with product
o Variable speed controls for custom
venting—separate on/off switch
allows you to leave ventilator at
favorite/most-used setting
Designer 12”H. hoods include
• Professional-type size, design, and styling
• Delay function—can be set to shut off
from 10 – 30 minutes later (10 min.
increments)
• 12-hour timer built into controls
• Two dishwasher-safe stainless steel
mesh filters are easily removed for
quick cleaning (frame and mesh are
stainless steel)
• 460 CFM interior-power ventilator
comes standard with product
o Variable speed controls for custom
venting—separate on/off switch
allows you to leave ventilator at
favorite/most-used setting
Model numbers
PROFESSIONAL WALL HOODS, 10”H./21”D.
• VWH2410—24”W.
o Recommended for use with 24”W.
non-griddle/grill ranges (for larger
equipment, use 18”H. hood)
• VWH3010—30”W.
o Recommended for use with 30”W.
ranges, 30”W. non-griddle/grill
rangetops, and 30”W. cooktops
• VWH3610—36”W.
o Recommended for use with 36”W.
non-griddle/grill ranges, 36”W.
non-griddle/grill rangetops, and
36”W. cooktops
DESIGNER CHIMNEY WALL HOODS,
12”H./24”D.
• DCH3042—30”W.
o Recommended for use with 30”W.
ranges, 30”W. non-griddle/grill
rangetops, and 30”W. cooktops
• DCH3642—36”W.
o Recommended for use with 36”W.
ranges, 36”W. non-griddle/grill
rangetops, and 36”W. cooktops
Burgundy (BU), Plum (PL), Chocolate
(CH), and Cobalt Blue (CB).
• Finish designates front and sides.
• Accessory Rail Option (DCH Only)—
Front of hood. (Must be ordered
factory installed)
o Stainless Steel/Chrome (CR)—
Stainless steel rail with chrome
supports/brackets and hooks
(included).
o Brass Trim Option (DCH Only) (BR)—
rail, supports/brackets, and hooks
(included). Brass components have a
durable protective coating for
maintenance-free normal use.
o Brass Trim Option (BR)—nameplate,
rail, supports/brackets, and hooks
(included). Brass components have a
durable protective coating for
maintenance-free normal use.
FINISH DETAILS DESIGNER MODELS
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite
Gray (GG), Stone Gray (SG), Taupe
(TP), Biscuit (BT), Cotton White (CW),
Oyster Gray (OG), Golden Mist (GM),
Lemonade (LE), Sage (SA), Mint Julep
(MJ), Sea Glass (SE), Iridescent Blue
(IB), Viking Blue (VB), Pumpkin (PM),
Racing Red (RR), Apple Red (AR),
FINISH DETAILS FOR PROFESSIONAL MODELS
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite Gray
(GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray
(OG), Golden Mist (GM), Lemonade (LE),
Sage (SA), Mint Julep (MJ), Sea Glass
(SE), Iridescent Blue (IB), Viking Blue (VB),
Pumpkin (PM), Racing Red (RR), Apple
Red (AR), Burgundy (BU), Plum (PL),
Chocolate (CH), and Cobalt Blue (CB).
• Finish designates front and sides.
• Accessory Rail Option—Front of hood.
(Must be ordered factory installed)
o Stainless Steel/Chrome (CR)—Stainless
steel rail with chrome supports/
brackets and hooks (included).
VWH Professional
Wall Hood
DCH Designer Chimney
Wall Hood
Standard Features & Accessories
Model Options
ORDERING INSTRUCTIONS
First specify model number, followed by color code (VWH2410
SS
). If ordering optional decorative rail, specify code at end
(VWH2410SS
CR
).