Viper 5901 Owner Manual
Viper 5901 Manual
 |
View all Viper 5901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Viper 5901 manual content summary:
- Viper 5901 | Owner Manual - Page 1
Viper® Auto Security Systems is Directed Electronics. Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car to delivering world class quality products and services that excite and delight our customers. O W N E R' S G - Viper 5901 | Owner Manual - Page 2
-art security and remote start system. Reading this Owner's Guide prior to using your system will help maximize the use of your system and its many features. For more information please visit the below website: http://www.viper.com - For general and additional guide information. For any additional - Viper 5901 | Owner Manual - Page 3
your system's many features. Replacement remote controls If additional remote controls are desired, please see your authorized dealer or visit us at www.directedstore.com to order. Part numbers are: 7752V for Responder LC 2-way remote control and 7652V for the companion remote control. Your system - Viper 5901 | Owner Manual - Page 4
: (Level 2 18 Sensor Bypass 18 Remote Valet 18 AUX 2 18 Timer Start 19 Runtime Remaining 19 Advanced commands: (Level 3 20 Sensor Silent Arm 20 AUX 3 20 Smart Start 21 Alarm Report 21 Advanced commands: (Level 4 22 Full Silent Arm 22 AUX 4 22 Defogger 22 Responder LC configuration 23 - Viper 5901 | Owner Manual - Page 5
Remote Start Info 25 Runtime Alert 26 Car 2 26 Screen Color 26 Temp Unit 26 Button Beep 27 System Type 27 Clock Set 27 Review 27 Exit 27 Sensor Adjust 27 Pair Remote 28 Demo mode 28 Power Off 29 Exit 29 Alarm Features 30 Normal Arm Protection 30 Sensor Silent Arm protection 30 Full - Viper 5901 | Owner Manual - Page 6
40 Valet Mode 41 Power Save 41 Rapid Resume 41 Automatic Remote Updates 41 Out of Range 42 No Remote Output 42 Feature not Available 42 1-way Companion Remote Control 43 Accessing Commands 44 Button Auto Lock 44 Car Select 44 Programming 45 Battery Information (1-Way 46 System Expansion - Viper 5901 | Owner Manual - Page 7
diagram under Responder LC 2-way). The text field will display CHARGE to indicate the remote control is charging (The remote remains operational while charging and can command the system). 2. Once fully charged the text field will display FULL . 3. The remote control is then ready for use. Disconnect - Viper 5901 | Owner Manual - Page 8
At a Glance Keys to using this manual Specific actions (in bold type) and style conventions are used consistently throughout this manual, they are as follows: s - Viper 5901 | Owner Manual - Page 9
-USB Port Feature Internal Antenna Display Command buttons (4) Function button Mini-USB Port Description Used for transmitting and receiving information Status screen - the upper portion of the display contains status icons for the System, Siren, Alarm zones, Remote Start and Remote Control. Text - Viper 5901 | Owner Manual - Page 10
At a Glance Control Center Status LED Control button The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: s - Viper 5901 | Owner Manual - Page 11
Status + ALL Unlocked: The system is Unlocked in Valet, the alarm is disabled. Siren is disabled for sensor triggers; remote is paged for all triggers (Sensor Silent Arm). Siren is disabled for all triggers; remote is paged for all triggers (Full Silent Arm). Remote start is active, the engine is - Viper 5901 | Owner Manual - Page 12
On. Note: When the icon is without an arrow head: Smart Start is On; Remote Start is Off. Manual Transmission Start mode is enabled, the engine can be started Displays the vehicle interior temperature Remote Start On during Remote Start after performing the Defogger On command On during Warn-away - Viper 5901 | Owner Manual - Page 13
text and feature menus On after the Garage Open** message has been received. On after the Garage Closed** message has been received. * This icon not present until the Car 2 is turned on in the Setup Remote configuration menu. ** This icon not present until the remote is paired with an optional - Viper 5901 | Owner Manual - Page 14
system features and are performed by pressing one of the Command buttons. Basic commands control the most often used security and remote start features while Advanced commands control more specialized features the Silent Arm command. 3. The Responder LC remote will display SILENT ARMED in the text - Viper 5901 | Owner Manual - Page 15
4 Sensor Silent Full Silent Arm Arm Disarm/Unlock Silent Disarm Remote Valet Car Finder Remote Start A U X Aux/Trunk Runtime Reset AUX 1 Timer Start Smart Start Defogger AUX 2 AUX 3 AUX 4 Advance Level Change Car (3s), Enter programming (8s) Temperature Check Runtime Remaining Alarm - Viper 5901 | Owner Manual - Page 16
receiving the command.. (Example: Runtime reset command received when remote start is off) Refer to the notes included in the command descriptions that address these faults or go to Remote Start Error under the Remote Start Features section for more details. Commands © 2009 Directed Electronics - Viper 5901 | Owner Manual - Page 17
and beeps play to confirm and the system status icons update. If Valet mode* is On, the doors unlock and the VALET text and tone play. More than 2 siren chirps and remote beeps indicate a trigger has occurred. The DISARM text is replaced by the Alarm report.** 14 © 2009 Directed Electronics. All - Viper 5901 | Owner Manual - Page 18
as programmed. If Remote Start fails to activate, REMOTE START ERROR text and a fault tone play while the parking lights flash to identify the reason.*** * See Remote and System Operations for details. ** See Alarm Features for details. *** See Remote Start Error (under Remote Start Features) for - Viper 5901 | Owner Manual - Page 19
. Valet mode* or Trigger Zone Fault report** messages may be received. Silent Disarm Press and release The alarm disarms, doors unlock (if connected), and the parking lights flash twice. The SILENT DISARM text plays to confirm and the System Status icons update. The Alarm report** may replace the - Viper 5901 | Owner Manual - Page 20
runtime. Note Remote Start must be On to use this feature. Temp Request Press and hold the button Requests the vehicle's interior temperature and temporarily displays it via status screen icon and text field. * See Remote and System Operations section for details. ** See Alarm Features for details - Viper 5901 | Owner Manual - Page 21
bypass is Off, BYPASS OFF and 1beep play to confirm.. Note System needs to be armed to perform Sensor Bypass. Perform arm command any time to turn Sensor Bypass Off. Remote Valet Press and release Enters (or if On, exits) Valet Mode. The VALET text and beeps (1 for On, 2 for Off) play to confirm and - Viper 5901 | Owner Manual - Page 22
System needs to be armed or Timer Start will not start the engine. Runtime Remaining Press and hold the button Requests the remaining Remote start runtime and temporarily displays it in the text field. Note Remote Start must be On to use this feature. * See Advanced Start under Remote Start Features - Viper 5901 | Owner Manual - Page 23
Press and release the button 3 times. Sensor Silent Arm* Press and release level 3 The alarm arms, doors lock, the siren chirps and parking lights flash 3 times. The SENSOR SILENT ARM text and beeps play to confirm and the System and Siren Status icons update. Car finder Press and release The siren - Viper 5901 | Owner Manual - Page 24
SMART START ON or SMART START OFF text and beeps play to confirm and the Remote start status icons update. Note System needs to be armed or Smart Start will not start the engine. Alarm on. * See Alarm Features for more details. ** See Advanced Start under Remote Start Features for more details. - Viper 5901 | Owner Manual - Page 25
Defogger circuit will also automatically activate 10 seconds after remote starting if the temperature is below 55°F. Note Remote Start must be active to use this feature. * See Alarm Features for more details. ** This feature must be installed and turned on by an authorized Directed dealer. 22 - Viper 5901 | Owner Manual - Page 26
Configurations Operations of the Responder LC and how it communicates messages are set in the configuration Main Menu. Navigating menus and options Navigating menus and features, changing options, and exiting are performed using the remote control buttons. The following instructions discuss how to - Viper 5901 | Owner Manual - Page 27
Unlocking is not desired this message can be turned off by an authorized Directed Dealer. Page Mode Options: POWER SAVE , OFF , ON Paging is how the Responder LC remote monitors your system's messages. POWER SAVE extends battery life by turning Paging 24 © 2009 Directed Electronics. All rights - Viper 5901 | Owner Manual - Page 28
after 72 hours if the remote control is not used during this period. Just press any button to resume system monitoring. When set to ON it wakes up every few seconds to listen for pages from the system. When set to OFF it does not wake up to receive remote start or alarm trigger pages. Note: When - Viper 5901 | Owner Manual - Page 29
to expire. When set to ON , an alert is generated when the Remote Start Time-out message is received. When OFF , no alert output is emitted for the message. Car 2 Options: OFF , ON , HOME This remote can control two systems independently. When set to OFF , the Car2 select option is not available - Viper 5901 | Owner Manual - Page 30
the remote has been paired, and adjusts the text and main menu accordingly. This has been pre-set by the factory for your system. Clock Set Options: HOUR , MIN Review Displays firmware version Exit Exits and returns to the main menu Sensor Adjust: If you feel your security system shock sensor is - Viper 5901 | Owner Manual - Page 31
. Prepare the new remote to be Paired with the system 1. Make sure the remote control is set for the desired Car 1 or Car 2 operation. 2. Perform the steps under Access menu items section to access the Pair Remote mode. 3. When the remote beeps 3 times and PAIR is displayed the remote is ready to - Viper 5901 | Owner Manual - Page 32
Demo mode: Demo Mode plays a pre-selected group of animations as a demonstration tool to show friends or family. Running Demo mode shortens the battery life over time if used excessively s - Viper 5901 | Owner Manual - Page 33
Alarm Features Normal Arm Protection Status LED: The Control Center Status LED flashes as a visual indicator that your vehicle's security system is active. Starter Kill: The Failsafe starter kill relay prevents the engine from starting Note May require additional parts and installation Sensor - Viper 5901 | Owner Manual - Page 34
the Control Center the correct number of times (the default is 1 press). 3. After a few seconds the siren output ceases and the system is disarmed. Feature Details Note As a precaution, if programmed for Passive Arming or Auto re-arming the system should be placed into Valet Mode until a remote is - Viper 5901 | Owner Manual - Page 35
Trigger Zone Fault Report When armed by remote command the system runs a status check of the alarm trigger zones. Faulty zones (usually caused by dome light delay or open trunk) are bypassed and reported via the control center LED and remote, while all other trigger zones remain active and are - Viper 5901 | Owner Manual - Page 36
Zone # (led flashes) 1 2 3 4 5 6 Table of Zones Zone Name Trunk Shock Sensor Door Sensor 2 Ignition Hood Alarm Report when requested The Alarm Report displays the two most recent alarm triggers depending on the system state when requested. When disarmed, the report will display text to identify - Viper 5901 | Owner Manual - Page 37
on the remote control. 3. Turn the key to off, and remove it from the ignition, the engine continues running for the programmed runtime. 4. Exit the vehicle and arm the alarm. Note For Pit Stop on manual transmission vehicles follow the directions in the Manual Transmission Start (MTS mode) section - Viper 5901 | Owner Manual - Page 38
while Off, the engine will not start. (See Remote Start Error under Remote Start Features) move the switch back to the On position to resume normal operation. Advanced Start The Advanced start features Timer Start and Smart Start will automatically start the engine to maintain battery charge or - Viper 5901 | Owner Manual - Page 39
the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts. This will repeat as many times as set by the installer (default 6 starts). Timer Start is exited after the final start. Smart Start operation Smart Start uses the settings for Timer - Viper 5901 | Owner Manual - Page 40
installed into a manual transmission vehicle, the system requires that the MTS mode is properly set when parking. If MTS mode is not properly set or is defeated after being properly set the system will not start the engine and the REMOTE START ERROR text and tones play as an alert. Feature Details - Viper 5901 | Owner Manual - Page 41
and after a few seconds, the REMOTE START OFF message plays to confirm. If the door is opened in Step 3 then the engine continues to run. Turbo Timer Mode The system keeps the engine running for the Turbo Timer runtime and can be activated by remote control or optional dash mounted activation button - Viper 5901 | Owner Manual - Page 42
Hood open After performing Remote Start command - MTS not enabled 8 None After performing Timer Start or Smart Start command Toggle Switch off Alarm is triggered Solution Release foot brake Close hood Enable MTS mode Check all Solutions Turn switch on Disarm or reset alarm * Refers to the number - Viper 5901 | Owner Manual - Page 43
within 30 seconds the system re-arms itself and locks the doors. Auto Re-arming* Auto re-arm ensures the vehicle stays protected if it is not entered after disarming by remote control. After disarming by remote, the alarm automatically re-arms itself (and locks the doors if programmed on) in 30 - Viper 5901 | Owner Manual - Page 44
Valet Mode Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the control button. When entered, the alarm functions are defeated while the convenience features still operate normally. Arm and Disarm commands lock and unlock the doors - Viper 5901 | Owner Manual - Page 45
Remote Start is Off Sensor Bypass System is not armed Defroster Remote Start is Off. Not configured for this. Reason/Solution Only available when Remote Start is On Only available when system is armed Only available when Remote Start is On. Only available when configured for Defroster control - Viper 5901 | Owner Manual - Page 46
Arm/Lock (Panic) Disarm/ Unlock Remote Start A U X Aux/Trunk x 1 LEVEL 1 Silent Arm x 2 LEVEL 2 Sensor Bypass x 3 x 4 LEVEL 3 LEVEL 4 Sensor Silent Full Silent Arm Arm Silent Disarm Remote Valet Car Finder Runtime Reset AUX 1 Timer Start Smart Start Defogger AUX 2 AUX 3 AUX 4 Not - Viper 5901 | Owner Manual - Page 47
followed by the button, the buttons unlock and tones play to confirm. Car Select Car 2 must first be turned On (See Remote Features menu under Programming section below to turn on). Press and hold the button for 3 seconds. The remote flashes the LED and beeps once or twice to indicate the selected - Viper 5901 | Owner Manual - Page 48
for each step back, the LED turns off when programming is exited. Sensor Adjust The button is used for sensor adjustment, to avoid unintended alarm triggers, it is recommenced that an authorized Directed dealer perform all sensor adjustments. Remote Features menu Press and release the button, 2 LED - Viper 5901 | Owner Manual - Page 49
the direction), remove the cover from the remote control housing. + 2. Gently pry up on the battery to re- move it from the holder. Insert a new battery into the holder and under the clip with the positive (+) side up. Replace the battery cover. The re- mote control is now ready for use. 46 - Viper 5901 | Owner Manual - Page 50
sunroof on vehicles with this type of OEM convenience feature. Alarm output duration The length of time the siren sounds can be adjusted from 1 to 180 seconds at the time of installation. Arming and Warn-away chirp control The system Arm, Disarm and Sensor Warn-away chirps can be configured for those - Viper 5901 | Owner Manual - Page 51
Channels The Auxiliary Channel outputs of this system can activate many of the convenience features found in today's vehicles. Once a command is performed to activate a convenience feature the Responder LC displays text that matches the feature. The system installer can clarify if any of the below - Viper 5901 | Owner Manual - Page 52
serviced only through an authorized Directed Electronics dealer. The information and precautions in this section can help maximize your battery's life and usage in providing your Responder LC remote control with many years of trouble the Responder LC and 1way companion remote controls check - Viper 5901 | Owner Manual - Page 53
the pager off and stops receiving messages from the system. It will continue to command the system until the battery can be charged. Battery Life The Responder LC remote control has many features that make it one of the most unique remote controls on the market today, including superior long range - Viper 5901 | Owner Manual - Page 54
with your municipal requirements for battery disposal or return to Directed Electronics at: One Viper way, Vista, CA 92081 (Shipping and/or handling costs are the sole responsibility of the owner/sender and will not be covered by Directed Electronics). Battery © 2009 Directed Electronics. All - Viper 5901 | Owner Manual - Page 55
indicate the status of your system. It is located on your system's Control Center. Control Button A small push button located on your system's control center. It is used to override (disarm) the alarm when a remote is not available or to enter or exit Valet Mode. 52 © 2009 Directed Electronics - Viper 5901 | Owner Manual - Page 56
© 2009 Directed Electronics. All rights reserved. 53 - Viper 5901 | Owner Manual - Page 57
to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However - Viper 5901 | Owner Manual - Page 58
Control Center To satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio - Viper 5901 | Owner Manual - Page 59
the vehicle serviced, the remote start system must be disabled using the installed menu wheel. It is the user's sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle - Viper 5901 | Owner Manual - Page 60
Before remote starting a manual transmission vehicle, be sure to: s - Viper 5901 | Owner Manual - Page 61
ITS INTENDED MODE OF OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE - Viper 5901 | Owner Manual - Page 62
") promises to the original purchaser to repair or replace (at Directed's election) with a comparable reconditioned model any Directed unit (hereafter the "unit"), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in - Viper 5901 | Owner Manual - Page 63
'S PURCHASE PRICE OF THE WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE plan or call Directed Customer Service at 1-800-876-0800 sales receipt, showing the following: o Date of purchase o Your full name and address o Authorized dealer's company name and address o Type of alarm installed - Viper 5901 | Owner Manual - Page 64
- Viper 5901 | Owner Manual - Page 65
nest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
 |
 |
O W N E R’ S G U I D E
M
O
D
E
L
5901
©
2009 Directed Electronics,
All rights reserved.
G5702V 2009 07
The company behind Viper
®
Auto Security Systems
is Directed Electronics.
Since its inception, Directed Electronics has had one
purpose, to provide consumers with the finest vehicle
security and car stereo products and accessories
available. The recipient of nearly 100 patents
and
Innovations Awards in the field of advanced electronic
technology, Directed Electronics is ISO 9001 registered.
Quality Directed Electronics products are sold and serviced
throughout North America and around the world.
Call
(800) 876-0800
for more information about our
products and services.
Vista, CA 92081
www.directed.com
Directed Electronics is an
ISO 9001 registered company.
Directed Electronics is committed to delivering
world class quality products and services that
excite and delight our customers.
NO ONE DARES COME CLOSE