Viper 5902 Owner Manual
Viper 5902 Manual
 |
View all Viper 5902 manuals
Add to My Manuals
Save this manual to your list of manuals |
Viper 5902 manual content summary:
- Viper 5902 | Owner Manual - Page 1
viper.com The company behind Viper® Auto Security Systems is Directed Electronics. Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car world class quality products and services that excite and delight our customers. O W N E R' - Viper 5902 | Owner Manual - Page 2
state-of-the-art remote start and security system. Reading this Owner's Guide prior to using your system will help maximize the use of your system and its many features. For more information please visit the below website: http://www.viper.com - For general and additional guide information. For any - Viper 5902 | Owner Manual - Page 3
your system's many features. Replacement remote controls If additional remote controls are desired, please see your authorized dealer or visit us at www.directedstore.com to order. Part numbers are: 7941V for Responder HD 2-way remote control and 7652V for the companion remote control. Your system - Viper 5902 | Owner Manual - Page 4
Contents Getting Started...4 Charging the remote control 4 Keys to using this manual 5 Remote Control Information 6 Control Center 7 Status Screen Icons 8 Using your System 10 Commands and Confirmations 10 Navigation 10 Performing Commands 10 Fault Condition Alerts 11 Basic commands ( - Viper 5902 | Owner Manual - Page 5
25 Adjustments Menu 26 Clock Settings 26 Timer Start 26 Smart Start 27 Remote Pair 28 Sensor Adjust 29 Options Menu 31 Power Off 31 Parking Meter 31 Countdown Timer 32 Name Tags 33 Demo Mode 33 Level 5 Screen 34 Alarm Features 35 Normal Arm Protection 35 Sensor Silent Arm protection - Viper 5902 | Owner Manual - Page 6
Information (1-Way 52 System Expansion Options 53 Battery Information (Responder HD 55 Low Battery 55 Battery Life 56 Battery Disposal 57 Glossary of Terms 58 Specifications...59 Government Regulations 60 Warning! Safety First 62 Installation 62 Remote Start Capable 62 Manual Transmission - Viper 5902 | Owner Manual - Page 7
Getting Started Your Responder HD remote is powered by an internal rechargeable battery that can only be serviced by an authorized Directed dealer. Due to transit and storage time prior to your purchase, the battery charge may have depleted. To ensure proper operation, - Viper 5902 | Owner Manual - Page 8
At a Glance Keys to using this manual Specific actions (in bold type) and style conventions are used consistently throughout this manual, they are as follows: s - Viper 5902 | Owner Manual - Page 9
information Full color display Used to perform arming, disarming, auxiliary channel and remote start commands Used to access Function Level screens, control Status Screen info center content, and navigates the remote control and system configuration menus Resets the remote control's microprocessor - Viper 5902 | Owner Manual - Page 10
At a Glance Control Center Status LED Control button The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: s - Viper 5902 | Owner Manual - Page 11
Icons Clock Page/Alerts Siren Status Sensor Status Info Center Battery Level Timer Mode/Smart Start Remote Start Status System Status Name Tag The table below describes all the Status screen icons. Feature Clock Battery level Description Indicates the time in 12 or 24 hour format Timer Mode - Viper 5902 | Owner Manual - Page 12
At a Glance Feature Name Tag Info Center Sensor Status Description Displays a personalized name tag 1-15 characters long Displays the Remote Start runtime, Temperature Auto-report, Parking meter and Countdown timers. While Status screen is on, press the menu wheel to change the displayed - Viper 5902 | Owner Manual - Page 13
remote control. A description of each feature confirmation is found in the following Basic command and Advanced command sections. Navigation To navigate to the Status and Function level screens, toggle the menu wheel up or down, the screens will cycle as shown in the facing diagram. These screens - Viper 5902 | Owner Manual - Page 14
3. The Responder HD remote will play the SILENT ARM animation followed by the Status screen. Status Screen Commands Blank Display Toggle Menu Wheel Up or Down Command Buttons Fault Condition Alerts If, when performing a command, a condition exists that does not allow the activation of a feature - Viper 5902 | Owner Manual - Page 15
and the Trigger Zone Fault report** plays. To Arm and Panic Press and hold The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the siren and firm. * ** 12 See Remote and System Operations section for details. See Alarm Features for details. © 2009 Directed Electronics. All rights reserved - Viper 5902 | Owner Manual - Page 16
fault screen and tone plays to identify the reason.*** * See Remote and System Operations for details. ** See Alarm Features for details. *** See Remote Start Not Available (Remote Start Features). For Manual transmission vehicles see the Manual Transmission Start sec- tion under Remote Start - Viper 5902 | Owner Manual - Page 17
commands: Function Level 2 From blank screen, toggle menu wheel down 2 times Silent Arm Press and release The alarm arms, doors lock (if connected confirm. * ** 14 See Remote and System Operations section for details. See Alarm Features for details. © 2009 Directed Electronics. All rights reserved. - Viper 5902 | Owner Manual - Page 18
while remote start is active, runtime reset will reset the runtime counter to the pre-programmed setting. The RUNTIME RESET animation and tones play to confirm. The Remote Start runtime is reset in the Status screen. Note Remote Start must be active to use this feature. * See Alarm Features for - Viper 5902 | Owner Manual - Page 19
Sensor Bypass menu screen has four options, pressing the appropriate button as shown below activates that bypass level. An appropriate screen and beeps play warn-away and full trigger output and messages to the remote are defeated. Note System needs to be armed to perform Sensor Bypass. Perform arm - Viper 5902 | Owner Manual - Page 20
On and slowly five times for Off. The SMART START ACTIVATED or SMART START DEACTIVATED animation and beeps play to confirm. Note Advanced Start will not start the engine unless the system has been Armed or Locked In Valet. * See Remote Start Features for more details. © 2009 Directed Electronics. All - Viper 5902 | Owner Manual - Page 21
and lights flash 4 times. The FULL SILENT MODE screen and beeps play to confirm. AUX 3 Press and release AUX Activates (or if On, deactivates) the Aux 3 output. The AUX CHANNEL animation and On tones or Off tones play to confirm. * See Alarm Features for more details. 18 © 2009 Directed Electronics - Viper 5902 | Owner Manual - Page 22
. The DEFROSTER ON screen and beeps play to confirm. For convenience, the Defroster circuit will also automatically activate 10 seconds after remote starting if the temperature is below 55°F. Note Remote Start must be active to use this feature. * This feature must be installed and turned on by - Viper 5902 | Owner Manual - Page 23
Name Tag set in the Options menu before it can be selected. If the selected car does not respond the remote displays the CAR 1 NOT AVAILABLE screen (or car 2 if applicable) and remains in the newly selected car mode. AUX 4 Press and release AUX Activates (or if On, deactivates) the Aux 4 output. The - Viper 5902 | Owner Manual - Page 24
of the most recent alarm triggers for display on the remote. The last trigger report clears when the ignition is turned on. Temp Request Press and release Requests the vehicle's interior temperature and temporarily displays it in the status screen info center. * See Alarm Features for more details - Viper 5902 | Owner Manual - Page 25
Beeps Paging Temp Units Clock Settings Timer Start Smart Start Remote Pair Sensor Adjust Power Off Parking Meter Countdown Timer Name Tags Demo Mode Level 5 screen No features, used only to exit menus Navigating menus and configuring features Configuring your system is performed via the menu wheel - Viper 5902 | Owner Manual - Page 26
The following instructions discuss how to access and configure the many features available, allowing you to customize your HD remote control to your personal preferences. To access the main menu screens (from a blank display): 1. Press and hold the menu wheel for 3 seconds, the remote control enters - Viper 5902 | Owner Manual - Page 27
button, the Status screen and unlock tones play to confirm. Auto unlocking: After turning the ignition off, a message to the remote unlocks the buttons Tone+Vibrate, Vibrate, Screen Only There are several ways for the HD to alert you when it has received a message from the system. Select Tone to be - Viper 5902 | Owner Manual - Page 28
after 72 hours if the remote control is not used during this period. Just press any button to resume system monitoring. When ON it wakes up every few seconds to listen for pages from the system. When OFF it does not wake up to receive remote start or alarm trigger pages. Configurations Note When - Viper 5902 | Owner Manual - Page 29
Used to adjust the clock and set the Status screen time format. Setting the clock 1. Toggle to Clock Settings and press the menu wheel, the Clock Settings screen is displayed. 2. Press the menu wheel to enter field, to adjust and save a new clock setting, follow the on-screen instructions. s - Viper 5902 | Owner Manual - Page 30
Setting Timer Start 1. Disarm the system then access the Adjustments feature menu. 2. Toggle to Timer Start and press the menu wheel, the Timer Start screen with current setting is displayed. If the system is not ready the NO FUNCTION ASSIGNED screen and tone plays. Return to Step 1. 3. Press - Viper 5902 | Owner Manual - Page 31
ready the NO FUNCTION ASSIGNED screen and tone plays, return to Step 1. 3. Press the menu wheel to enter the Low Temp Start field or toggle and press to enter the High Temp Start field. 4. To adjust and save new settings follow the on-screen instruc- tions. s - Viper 5902 | Owner Manual - Page 32
again until the tones are played. If the siren does not chirp shortly after the remote LED begins flashing make sure the system is in remote pair mode. Sensor Adjust Your Responder HD security with remote start system has a built in shock sensor used to detect intrusion attempts on your vehicle. The - Viper 5902 | Owner Manual - Page 33
levels without generating false alarms. If you feel your security system shock sensor is too sensitive or not sensitive enough, it is highly recommended that you contact your authorized Directed dealer/professional and have the sensor - Viper 5902 | Owner Manual - Page 34
menu wheel for 3 seconds, the VIPER animation and On tones play to confirm the remote control is ready for normal operation. The remote also turns itself on and begins charging when the battery charger is connected. Configurations Parking Meter Options: Start Meter, Parking Meter Set The Parking - Viper 5902 | Owner Manual - Page 35
3. To adjust and save a new meter setting follow the on-screen in- structions. s - Viper 5902 | Owner Manual - Page 36
allow you to personalize your Responder HD remote control by adding a unique name to the Status screen for the system it controls. For Name Tag1; Remote 1 is the default setting. Name Tag2 is used when your Responder HD remote control is used to control a companion system in another vehicle. For - Viper 5902 | Owner Manual - Page 37
supplied battery charger must be connected to your Responder HD remote control for Demo Loop or Demo Loop Muted to operate. Level 5 Screen Options: Aux 4 (default), Garage This feature allows you to choose the Function level 5 screen according to your system's configuration. Aux 4 is for normal use - Viper 5902 | Owner Manual - Page 38
Alarm Features Normal Arm Protection Status LED: The Control Center Status LED flashes as a visual indicator that your vehicle's security system is active. Starter Kill: The Failsafe starter kill relay prevents the engine from starting Note May require additional parts and installation Sensor - Viper 5902 | Owner Manual - Page 39
, the next press or toggle of the remote control buttons or wheel replays the zone specific TRIGGER animation for review before returning to normal operation. Emergency Override The following procedure disarms the system when a programmed remote is not available. Number of presses__________ 1. Turn - Viper 5902 | Owner Manual - Page 40
to indicate the last two zones that were triggered (see Table of Zones). The remote control Disarm output is replaced by screens and beeps that identify the two most recent triggers. Feature Details * See Nuisance Prevention (NPC) following this for more details. © 2009 Directed Electronics. All - Viper 5902 | Owner Manual - Page 41
to the remote via Sensor Status icon in the Status Screen, and by NPC On screens that are displayed during the Disarm Trigger and Last Trigger reports. Bypassed sensors automatically reset after one hour and after the vehicle is driven. Disarming then re-arming the alarm does not reset bypassed - Viper 5902 | Owner Manual - Page 42
the vehicle and arm the alarm. Feature Details Note For Pit Stop on manual transmission vehicles, follow the directions in the Manual Transmission Start (MTS mode) section found further into Remote Start Features. Key Takeover When you are ready to drive The system keeps the engine running until - Viper 5902 | Owner Manual - Page 43
will let you know the switch is Off. (See Remote start not available) move the switch back to the On position to resume normal operation. Toggle Switch location: Advanced Start The Advanced start Timer Mode and Smart Start features automatically start the engine as set in the Adjustments menu - Viper 5902 | Owner Manual - Page 44
and the REMOTE START ACTIVATED message is sent to the remote control. When the Remote start runtime expires the engine shuts off, the REMOTE START DEACTIVATED message is sent to the remote control and the countdown timer restarts. Smart Start is exited after the final start. Feature Details Note - Viper 5902 | Owner Manual - Page 45
again at one minute before the engine turns off. The REMOTE START TIMEOUT IMMINENT animation and tones play as an alert to reset the runtime if desired. Manual Transmission Start (MTS mode) When installed into a manual transmission vehicle, the system requires that the MTS mode is properly set when - Viper 5902 | Owner Manual - Page 46
and after a few seconds, the REMOTE START DEACTIVATED message plays to confirm. If the door is opened in Step 3 then the engine continues to run. Turbo Timer Mode The system keeps the engine running for the Turbo Timer runtime and can be activated by remote control or optional dash mounted activation - Viper 5902 | Owner Manual - Page 47
Remote Start Not Available For user safety, the system must be properly configured or remote start will not activate. Refer to the table below for the screens and parking light flashes that will identify the configuration issue and resolution. Fault Message BRAKE ON Flashes * 5 HOOD OPEN 6 REMOTE - Viper 5902 | Owner Manual - Page 48
it is not entered after disarming by remote control. After disarming by remote, the alarm automatically re-arms itself (and locks the doors if programmed on) in 30 seconds. Open any point of entry to stop the re-arm until the next disarm by remote. Feature Details Onetime Bypass* Turn the ignition - Viper 5902 | Owner Manual - Page 49
power is reconnected. Automatic Remote Updates The system sends a silent message to all remote controls after any major action has occurred. When the remote receives this message it updates the status screen icons. This way all users are able to quickly review the system status just by accessing - Viper 5902 | Owner Manual - Page 50
/Solution Only available when Remote Start is On Only available when system is armed Only available when Remote Start is On. Only available when configured for Defroster control. Set Car 2 name tag to activate Car 2 capability. Move to within range . Feature Details © 2009 Directed Electronics - Viper 5902 | Owner Manual - Page 51
No Function Assigned The HD remote is designed for one button activation, all commands can therefore be performed using one hand. If more than one button is pressed at a time, the NO FUNCTION ASSIGNED screen and tone plays as an alert. 48 © 2009 Directed Electronics. All rights reserved. - Viper 5902 | Owner Manual - Page 52
Car Finder Unlock Remote Start Runtime Reset Timer Mode* Smart Start* Defroster* A U X Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4 Not Used Used to access function levels for Advanced Commands ( with multiplier in third row implies button presses) * These Function Level commands on the 1-way - Viper 5902 | Owner Manual - Page 53
Using the 1 way companion remote The companion 1 way remote commands the system features as shown in the previous table, but without the message display of the Responder HD remote. Siren chirps and vehicle parking light flashes are used to indicate that a command has been received and activated as - Viper 5902 | Owner Manual - Page 54
the LED and beeps continue to perform Car Select. Once the car is selected a command can be performed by pressing one of the command buttons. * See System Expansion Options for more details . 1-Way Programming To enter; hold the button for 8 seconds, the remote emits one long beep and turns the - Viper 5902 | Owner Manual - Page 55
to program to the system. Per the instruction in the Remote Pair section of this guide, following step 4 of Placing the system into the remote pair mode. Press and hold the button, the siren emits one long chirp to confirm the remote has been learned. Battery Information (1-Way) The 1way companion - Viper 5902 | Owner Manual - Page 56
newly selected car does not respond the remote control then displays the CAR 1 NOT AVAILABLE screen (or Car 2 if applicable) and remains in the newly selected car mode. Owner recognition The system can be configured to recognize the remote used when disarming and change selected features to match - Viper 5902 | Owner Manual - Page 57
Channels The Auxiliary Channel outputs of this system can activate many of the convenience features found in today's vehicles. Once a command is performed to activate a convenience feature the Responder HD displays an animation that matches the feature. The system installer can clarify if any of the - Viper 5902 | Owner Manual - Page 58
battery's life and usage in providing your Responder HD remote control with many years of trouble free operation. The battery information for the 1way companion remote control can be found in the 1-way Companion Remote Control section of this manual. Warnings! NEVER connect the supplied AC adapter - Viper 5902 | Owner Manual - Page 59
. The Responder HD remote control also interrupts each Status screen output and plays the LOW BATTERY ON REMOTE screen with several alert beeps. Important To preserve power at critically low battery levels the HD remote disables the color display, stops receiving messages from the system, and - Viper 5902 | Owner Manual - Page 60
ger message animations will play. s - Viper 5902 | Owner Manual - Page 61
all of the system's functions. Responder HD (2-way Remote Control) A hand-held, remote control which operates the various functions of your system and receives messages and pages from the system. Companion Remote (1-way Remote Control) A hand-held, remote control which operates the various - Viper 5902 | Owner Manual - Page 62
Specifications Responder HD 2-way SST Remote Control Power Requirements: 5 VDC, 500 mA Display: 128 by 128 pixel, 65k, Color Organic Light Emitting Diode (OLED) Frequency: 900 - 928 MHz Spread Spectrum Operating Temperature: -10°C to +40°C (23°F to 104°F) Security with Remote Start System (in - Viper 5902 | Owner Manual - Page 63
to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However - Viper 5902 | Owner Manual - Page 64
Control Center To satisfy FCC RF this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio to operate this device. Safety © 2009 Directed Electronics. All rights reserved. 61 - Viper 5902 | Owner Manual - Page 65
a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed menu wheel. It is the user's sole responsibility to properly handle and keep out of reach from children all remote control transmitters - Viper 5902 | Owner Manual - Page 66
Before remote starting a manual transmission vehicle, be sure to: s - Viper 5902 | Owner Manual - Page 67
OF OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL - Viper 5902 | Owner Manual - Page 68
and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof - Viper 5902 | Owner Manual - Page 69
PURCHASE PRICE OF TO REPLACE OR REPAIR THE CONTROL or call Directed Customer Service at 1-800-876 sales receipt, showing the following: o Date of purchase o Your full name and address o Authorized dealer's company name and address o Type of alarm installed o Year, make, model and color
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
 |
 |
O W N E R’ S G U I D E
M
O
D
E
L
5902
©
2009 Directed Electronics,
All rights reserved.
G5902V 2009 07
The company behind Viper
®
Auto Security Systems
is Directed Electronics.
Since its inception, Directed Electronics has had one
purpose, to provide consumers with the finest vehicle
security and car stereo products and accessories
available. The recipient of nearly 100 patents
and
Innovations Awards in the field of advanced electronic
technology, Directed Electronics is ISO 9001 registered.
Quality Directed Electronics products are sold and serviced
throughout North America and around the world.
Call
(800) 876-0800
for more information about our
products and services.
Vista, CA 92081
www.viper.com
Directed Electronics is an
ISO 9001 registered company.
Directed Electronics is committed to delivering
world class quality products and services that
excite and delight our customers.
NO ONE DARES COME CLOSE