Vivitar 5399 ManualEnglish
Vivitar 5399 Manual
 |
View all Vivitar 5399 manuals
Add to My Manuals
Save this manual to your list of manuals |
Vivitar 5399 manual content summary:
- Vivitar 5399 | ManualEnglish - Page 1
CONTENTS English I Getting to know your camera 1 1. Configuration & installation 1 2. Monitor screen display 2 3. Preparation before capture 2 4. Shooting 3 5. Video& Audio recording 7 6. Audio input /output 8 7. Image review setup 10 8. Other setup 12 II Software & Download 15 - Vivitar 5399 | ManualEnglish - Page 2
4 Macro switch 5 USB jack 6 Lens 7 TFT monitor screen 8 Left/self-timer button 9 Playback button 10 Zoom out button 11 Zoom in button 12 Busy light 13 Macro light 14 Up/Display button 15 Ok button 16 Right / Flash button 17 Down/Mode button 18 Delete Button 19 Menu button 20 Battery cover 21 SD card - Vivitar 5399 | ManualEnglish - Page 3
2. Monitor screen display English 3. Preparation before capture 3.1 Battery It's optional to use AAA alkaline batteries or rechargeable batteries. Open the battery cover and load the batteries according to the polarity indicated on the battery door. 3.2 Insert the memory card Insert the memory - Vivitar 5399 | ManualEnglish - Page 4
take pictures. Attention: z Do not take the memory card or battery out when camera is saving the image, otherwise, the image won't be saved to select the picture. 4.2 Delete photos a) Press the PLAYBACK button to enter review mode. b) Press the DELETE button to enter the DELETE mode; c) Press - Vivitar 5399 | ManualEnglish - Page 5
button to exit. C. White Balance: a) Press the UP or DOWN button to select "White Balance", press the RIGHT button for 5 options: Auto, Day Light, Tungsten, Fluorescent, and Cloudy; b) Press the UP or DOWN button to select the proper mode; c) Press the "OK" button to confirm and press the - Vivitar 5399 | ManualEnglish - Page 6
E. Exposure: English a) Press the UP or DOWN button press the RIGHT button to select; to select "Exposure", and then b) Press the LEFT or RIGHT button to adjust the exposure from -2.0 to +2.0; then press the "OK" button to confirm. F. Date Stamp: Set up "date stamp" if you would like to show - Vivitar 5399 | ManualEnglish - Page 7
turn on/off according to the light Flash on: Force on the flash battery is low. Digital zoom To view the zoom effected by LCD. Note: digital zoom may affect the quality of image. The higher digital zoom multiples, the lower of the image quality, maximum 4X digital zoom is available. In the camera - Vivitar 5399 | ManualEnglish - Page 8
SHUTTER button again to end the playing; d): Press the OK button to pause, press it again to continue. Attention: Please note that this camera does not support the speaker; the volume is only available when connecting with TV or PC. 5.2 Delete video file See page 3 for detail set up. 5.3 Video - Vivitar 5399 | ManualEnglish - Page 9
b) Press the UP or DOWN button English to select the resolution. c) Press the OK button to confirm and press the MENU button to exit. B: Frame rate: a) Press the UP or DOWN button to select "Frame rate", press the RIGHT button for 2 options: 30FPS or 15FPS; b) Press the UP or DOWN button to - Vivitar 5399 | ManualEnglish - Page 10
. e): Press the OK button to pause and press it again to continue. Attention: ● The camera screen will automatically off when the cable is connected to the camera; ● The battery will also be used when the camera connected to TV; ● The TV system may affect the image quality, please adjust the - Vivitar 5399 | ManualEnglish - Page 11
7：Image review setup: English In image playback mode, press the "MENU" button to enter the main menu for 2 options: "play" and "Setup". There are 8 Options in "play" - Vivitar 5399 | ManualEnglish - Page 12
enter thumbnail mode; English b) Press the LEFT, RIGHT, UP and DOWN button image, then press the OK button to restore the original size. to select 7.4 Set Logo: You can set the picture you like as the startup logo. a) Press the UP or DOWN button to select "Set logo", press the RIGHT button - Vivitar 5399 | ManualEnglish - Page 13
8. Other settings English A: Language (Abc): a) Power on and press the "MENU" button to enter "Image" and "Setup"; b) Press RIGHT button to select "Setup"; c) Press the UP or DOWN button to select "Language (Abc), d) Press the RIGHT button to enter "Language (Abc)"; e) Press the UP or DOWN - Vivitar 5399 | ManualEnglish - Page 14
No startup screen is displayed when you select "Disable" E: Light Frequency a) Power on and press the "MENU" button to select "Setup"; b) Press the UP or DOWN button to select "Light Frequency"; c) Press the RIGHT button button to confirm. to select: 50HZ or - Vivitar 5399 | ManualEnglish - Page 15
to select "Format"; c) Press the RIGHT button memory or SD card. to select "Yes" to format the camera internal d) Press the OK button to confirm and press the MENU button to exit. Attention: All the saved files Press the OK button to confirm. f) Press MENU button to exit. J: USB Mode 14 - Vivitar 5399 | ManualEnglish - Page 16
disk. a) Power on and press the "MENU" button to enter "Setup"; b) Press the UP or DOWN button to select "USB Mode"; c) Press RIGHT button for options: "mass storage" or "PC camera". d) Press UP or DOWN button to select; e) Press the OK button to confirm and press MENU button to exit - Vivitar 5399 | ManualEnglish - Page 17
English Select the installed language 16 - Vivitar 5399 | ManualEnglish - Page 18
English Connect the camera with PC by USB cable, Power on the camera, then press "mode" button to select "PC CAMERA" 17 - Vivitar 5399 | ManualEnglish - Page 19
English An interface "Found new hardware Wizard" appears, select "Yes, this time only", then click "next"; Select "install the software automatically (Recommended)", click "next"; 18 - Vivitar 5399 | ManualEnglish - Page 20
English If "hardware installation" interface appears, click "Continue Anyway" ; 19 - Vivitar 5399 | ManualEnglish - Page 21
If the following interface appears, click "cancel"; English An interface "Found new hardware Wizard" appears, select "Yes, this time only", then click "next"; Select "install the software automatically (Recommended)", click "next"; 20 - Vivitar 5399 | ManualEnglish - Page 22
English If "hardware installation" interface appears, click "Continue Anyway"; 21 - Vivitar 5399 | ManualEnglish - Page 23
finished and now you can use the pc camera function; 2. How to use PC-CAM function 1. Power on the camera, Press the "mode" button to Select "PC camera" 2. Double click the icon "my computer" on the desktop of PC 3. Double click the icon "Vivicam 5399 video camera", Then you can start to use the pc - Vivitar 5399 | ManualEnglish - Page 24
Connect the USB cable with PC and the camera; b): Double click the icon "my computer" on the desktop of PC; c): Double click " Vivicam 5399 " icon d): Double click "DCIM" file folder; e): Copy all the files to your PC. Attention: 1. do not take out the SD card or the batteries when you copy - Vivitar 5399 | ManualEnglish - Page 25
(such as high temperature tool bag, trolley case and so on). Wait few minutes before use when you bring the camera from a low temperature environment to a warm environment. 2. Battery Energy management The energy status of the power can be displayed on LCD as below: low half full The factors - Vivitar 5399 | ManualEnglish - Page 26
Please replace new battery when battery low, and follow the battery instruction on when using. Please take out the battery if you won't use the camera for a long time. Don't insert the leakage, eroded or inflated battery into the camera. Note: if you use rechargeable battery, please full charge - Vivitar 5399 | ManualEnglish - Page 27
OK button to format the memory card. Attention: do not pull out the card or take out the battery when formatting to avoid any failure of the card. The following card is available to this camera: z Standard SD card（8 MB -2GB） z 3V（3.3V）card（8 MB - 2 GB） z 5V card is not available z The - Vivitar 5399 | ManualEnglish - Page 28
sec Self timer 10 sec/20 sec zoom 4 x digital zoom White balance Auto、Daylight、tungsten、fluorescent 、Cloudy exposure control Camera mode 640x480 interface USB1.1 TV output NTSC/PAL TFT monitor screen 2.4" TFT LCD monitor screen power 2 x AAA alkaline batteries、rechargeable batteries - Vivitar 5399 | ManualEnglish - Page 29
Auto power off 60sec/120sec English System required WIN98SE /2000/ME/XP/Vista Weight Approx. 85g(3.0oz)(without batteries and SD card) Dimensions Approx. 85 x 56 x 22mm(3.3x2.2x0.86 in) Attention: The product design and the specifications are subject to change without prior
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
English
CONTENTS
I
Getting to know your camera……………………..1
1.
Configuration & installation…………………..….1
2.
Monitor screen display……………….….…….2
3.
Preparation before capture……………………..2
4.
Shooting……………………………………………3
5.
Video& Audio recording…………………….…7
6.
Audio input /output………………………………..8
7.
Image review setup……………………….…..10
8.
Other setup………………………………………1
2
II Software & Download………………………………15
1 PC-CAM driver installation…………………..15
2 How to use PC CAM function…………………22
3 How to download the photos………………
......
23
III Maintenance…………………………………….……23
IV Specification and system requirement………
....
27