Vizio GV46LHDTV10A User Manual
Vizio GV46LHDTV10A Manual
 |
View all Vizio GV46LHDTV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Vizio GV46LHDTV10A manual content summary:
- Vizio GV46LHDTV10A | User Manual - Page 1
VIZIO GV46L HDTV User Manual Dear VIZIO Customer, Congratulations on your new VIZIO GV46L High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions accessories and installation services for your VIZIO LCD HDTV, please visit - Vizio GV46LHDTV10A | User Manual - Page 2
may cause damage and leakage of the batteries, operator injury and contamination the remote controller. • If any of the following occurs please contact the dealer: o The power connector fails or frays. o Liquid sprays or any object drops into the GV46L LCD HDTV. o The Display is exposed to rain or - Vizio GV46LHDTV10A | User Manual - Page 3
VIZIO GV46L HDTV User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in - Vizio GV46LHDTV10A | User Manual - Page 4
for future shipping. Package Contents VIZIO GV46L HDTV VIZIO Remote Control by Universal Electronics AV Cable (Yellow, Red and White Connectors) Power Cord VIZIO Bezel and Screen Cleaning Cloth This User Manual Quick Setup Guide Registration Card VIP Services Brochure Version 7/6/2006 4 www - Vizio GV46LHDTV10A | User Manual - Page 5
VIZIO GV46L HDTV User Manual Additional Certified Accessories for the VIZIO GV46L HDTV are sold separately Wall Mounts High Definition Cables Extra or replacement Remote VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO GV46L HDTV To purchase or inquire about - Vizio GV46LHDTV10A | User Manual - Page 6
VIZIO GV46L HDTV User Manual Preparing Your LCD HDTV for Wall Mounting The VIZIO GV46LHDTV can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the GV46LHDTV on the wall, please follow the instructions below for removing the stand base. To remove the stand - Vizio GV46LHDTV10A | User Manual - Page 7
VIZIO GV46L HDTV User Manual To remove the speakers If you wish to remove the attached speakers as well and use your Home Theatre System for the audio, please follow the procedure below. 1. Unplug the speaker wires from the GV46L at the rear of the TV. 1 2 3 4 2. Remove the four (4) screws - Vizio GV46LHDTV10A | User Manual - Page 8
DTV...39 3.3.7 Parental Controls for DTV...41 3.4 Watching a TV Program ...43 3.5 Adjusting Basic LCD HDTV Settings ...43 3.6 DTV Channel Information...44 3.7 Program Information...45 Chapter 4 Adjustment of the HDTV 46 4.1 Using the On Screen Display (OSD) ...46 4.2 Image Settings for TV and Video - Vizio GV46LHDTV10A | User Manual - Page 9
or Satellite Remote ...62 Chapter 6 Maintenance and Troubleshooting 63 6.1 Maintenance...63 6.2 Troubleshooting Guide ...63 6.3 Telephone & Technical Support ...65 6.4 Compliance ...66 6.5 FCC Class B Radio Interference Statement...66 Chapter 7 Miscellaneous Information 67 7.1 Specifications ...67 - Vizio GV46LHDTV10A | User Manual - Page 10
VIZIO GV46L HDTV User Manual Chapter 1 Basic Controls and Connections 1.1 Front Panel Power 'VIZIO' light - The VIZIO name lights white when powered on and orange when powered off. Remote Control Sensor - This is the window through which all of the remote control signals pass to the sensor. Point - Vizio GV46LHDTV10A | User Manual - Page 11
1.3 Rear Panel Connections Right Portion 1 2 3 VIZIO GV46L HDTV User Manual 4 5 1. SERVICE 2 - This custom communication port is for factory service only. 2. DTV/TV - Connect to an antenna or cable/digital cable for TV and Digital TV.* 3. OPTICAL DIGITAL AUDIO OUT - When the DTV input is - Vizio GV46LHDTV10A | User Manual - Page 12
VIZIO GV46L HDTV User Manual 11 13 15 12 14 16 6. SPEAKER - Connection for right speaker/sub-woofer. 7. SERVICE 1 - This custom communication port is for factory service the TV indicates LCD HDTV to an external device, such as a home theatre system, external amplifier or stereo. Speakers - Vizio GV46LHDTV10A | User Manual - Page 13
VIZIO GV46L HDTV User Manual 1.4 VIZIO Universal Remote Control The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four different components. The remote button functions are explained on the following pages. SET - This button starts all programming of - Vizio GV46LHDTV10A | User Manual - Page 14
VIZIO GV46L HDTV User Manual WIDE/Record - This button cycles through the available screen formats. The options are Wide, Normal, Zoom, Panoramic. Note: in RGB/PC mode the options are 4:3 and 16:9. This button also functions as VCR Record when the component is activated with the remote control. - Vizio GV46LHDTV10A | User Manual - Page 15
VIZIO GV46L HDTV User Manual ZOOM (- and +) - Use these buttons to increase or decrease the size of the picture. Note that in the zoom mode parts of the picture will not be visible because they extend beyond the edges of the screen. FREEZE - Press this button to "Freeze-Frame" the current screen. - Vizio GV46LHDTV10A | User Manual - Page 16
° up and down. 1.4.3 VIZIO Universal Remote Control Precautions The remote control should be kept dry and away from heat sources. Avoid humidity. If the TV responds erratically to the remote control or does respond at all, check the batteries. If the batteries are low or exhausted, replace them with - Vizio GV46LHDTV10A | User Manual - Page 17
VIZIO GV46L HDTV User Manual Chapter 2 Connecting Equipment 2.1 Which Video Connection Should I Use? The VIZIO the first and only industry-supported, uncompressed, all-digital audio/video TV Coaxial RF. This is the connection for standard NTSC TV Guide Version 7/6/2006 17 www.VIZIOCE.com - Vizio GV46LHDTV10A | User Manual - Page 18
VIZIO GV46L HDTV User Manual 2.2 Connecting Your DVD Player You have several options LCD HDTV. 3. Turn on the power to the LCD HDTV and your DVD player. 4. Select HDMI 1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the HDMI button on the Remote Control - Vizio GV46LHDTV10A | User Manual - Page 19
1 input (white area) at the rear of the LCD HDTV. 4. Turn on the power to the LCD HDTV and your DVD player. 5. Select HDMI 1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the HDMI button on the Remote Control. Note: a) b) If you are already using the - Vizio GV46LHDTV10A | User Manual - Page 20
green color area) at the rear of the LCD HDTV. 6. Turn on the power to the LCD HDTV and DVD player. 7. Select Component 1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the Component button on the Remote Control. Note: a) b) If you are already using the - Vizio GV46LHDTV10A | User Manual - Page 21
(Good): VIZIO GV46L HDTV User Manual 1. Turn off the power to the LCD HDTV and DVD player LCD HDTV. 4. Turn on the power to the LCD HDTV and DVD player. 5. Select AV1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the AV button on the Remote Control - Vizio GV46LHDTV10A | User Manual - Page 22
VIZIO GV46L HDTV User Manual 1. Turn off the power to the LCD HDTV TV) at the rear of the LCD HDTV. 4. Turn on the power to the LCD HDTV and DVD Player. 5. Select AV1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the AV button on the Remote Control - Vizio GV46LHDTV10A | User Manual - Page 23
the rear of the LCD HDTV. Turn on the power to the LCD HDTV and HDTV Set-Top Box. Select HDMI 1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the HDMI button on the Remote Control. The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection - Vizio GV46LHDTV10A | User Manual - Page 24
remote or side of the LCD HDTV, or directly by pressing the HDMI button on the Remote Control. Note: The HDMI Input is for HD Video and will only support 640x480 at 60Hz from a PC. Use the RGB PC input for a greater selection of PC formats. Note: a) b) c) The HDMI input on the LCD TV supports - Vizio GV46LHDTV10A | User Manual - Page 25
color area) at the rear of the LCD HDTV. 6. Turn on the power to the LCD HDTV and HDTV Set-Top Box. 7. Select Component 1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the Component button on the Remote Control. Note: a) b) If you are already using the - Vizio GV46LHDTV10A | User Manual - Page 26
input (yellow area) at the rear of the LCD HDTV. 4. Turn on the power to the LCD HDTV and VCR or Video Camera. 5. Select AV1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the AV button on the Remote Control. Note: a) b) If you are already using the AV1 - Vizio GV46LHDTV10A | User Manual - Page 27
INPUT button on the remote or side of the LCD HDTV, or directly by pressing the TV button on the Remote Control. Note: a) b) c) d) Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult your cable, satellite or TV station operator. Digital broadcasts are - Vizio GV46LHDTV10A | User Manual - Page 28
rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of the LCD HDTV. 3. Turn on the power to the LCD HDTV and VCR. 4. Select TV using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the TV button on the Remote Control. Note: If you have an off - Vizio GV46LHDTV10A | User Manual - Page 29
area) audio connectors at the rear of the LCD HDTV. 3. Turn on the power to the LCD HDTV and Receiver/Amp. 4. Then press the MENU button on the remote control to open the On-Screen Display (OSD) menu. 5. Press the button on the remote to highlight the Audio Settings menu. 6. Press the - Vizio GV46LHDTV10A | User Manual - Page 30
remote or side of the LCD HDTV, or directly by pressing the RGB button on the Remote Control. Note: a) b) c) For the best picture quality when connecting a pc computer through RGB PC, set your pc computer timing mode to VESA 1024x768 at 60Hz. Please refer to the pc or graphic card's user guide - Vizio GV46LHDTV10A | User Manual - Page 31
cable source is connected to the DTV/TV input, you will need to select TV using the INPUT button on the remote control or the side of the LCD HDTV, or directly by pressing the TV button on the remote control, and Auto Scan for the available TV channels. The screen will show 'snow' and an OSD panel - Vizio GV46LHDTV10A | User Manual - Page 32
MENU button on the remote control to open the OSD menu. The Image Settings Menu will be displayed. VIZIO GV46L HDTV User Manual 2. Press the button on the remote once to highlight the Setup menu and then press OK to select the menu. 3. Press the and buttons to highlight the TV Menu sub-menu. Press - Vizio GV46LHDTV10A | User Manual - Page 33
Use If an antenna or cable source is connected to the DTV/TV input, you will need to select DTV using the INPUT button on the remote control or the side of the LCD HDTV, or directly by pressing the TV button on the remote control. The first time you use your DTV input you will see the - Vizio GV46LHDTV10A | User Manual - Page 34
VIZIO GV46L HDTV User Manual 3.3.2 Setting DTV Channels Automatically 1. Press the MENU button on the remote control to open the OSD menu. The Image Settings Menu will be displayed. 2. Press the button on the remote control to highlight the Setup menu. Note: DTV digital broadcast is not available in - Vizio GV46LHDTV10A | User Manual - Page 35
option. Setting the correct Time Zone for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. VIZIO GV46L HDTV User Manual 6. Select your time zone using the or button. When finished, press the OK button to save and exit this option - Vizio GV46LHDTV10A | User Manual - Page 36
you are using cable out of the wall, Air if you are using an antenna. Press the button to save and exit this option. VIZIO GV46L HDTV User Manual 9. Press the button to highlight Scan. Press the OK button to activate. Note: This will take a few minutes to complete. 10. Once Auto Scan - Vizio GV46LHDTV10A | User Manual - Page 37
VIZIO GV46L HDTV User Manual 3.3.3 Setting DTV Channels Manually If you feel that not all of the available digital TV channels were found with Auto Scan, then selecting this option enables the TV to scan again to try to find any missing channels. 1. Press the button to highlight Manual Scan and then - Vizio GV46LHDTV10A | User Manual - Page 38
VIZIO GV46L HDTV User Manual 3.3.4 Adding or Deleting (Skipping) DTV Channels To select a DTV channel to be Press the OK button. 5. The list of channels available and stored in memory is shown on the screen. If the list is longer than 8 channels, as you repeatedly press the button you will be able - Vizio GV46LHDTV10A | User Manual - Page 39
the OK button to save and exit this feature. VIZIO GV46L HDTV User Manual 3.3.6 Closed Caption for DTV Refer to Section 3.3.2, page 34, and follow the instructions to display DTV Tuner Setup menu. Although this is digital TV, some broadcasts will have analog Closed Caption instead of digital - Vizio GV46LHDTV10A | User Manual - Page 40
the default setting for all DTV channels. Use the CC button on the remote to change the setting when viewing a channel. To set Digital Closed Caption now be Closed Caption On, in this example, Service 1 option. VIZIO GV46L HDTV User Manual To change the look of the Digital Closed Caption - Vizio GV46LHDTV10A | User Manual - Page 41
the style of the closed caption is as received from the TV channel. This is usually acceptable. If you want to change the style press the OK button and use the or button to select Custom. VIZIO GV46L HDTV User Manual The Caption Style screen is now filled with many options to change the look - Vizio GV46LHDTV10A | User Manual - Page 42
The Parental Control Password screen will be shown. Using the number buttons on the remote control, enter the four digit password. The factory or press to go back. VIZIO GV46L HDTV User Manual The list of channels available and stored in memory is shown on the screen. If the list is longer - Vizio GV46LHDTV10A | User Manual - Page 43
VIZIO GV46L HDTV User Manual 3.4 Watching a TV Program Before you start watching TV, please make sure that the LCD HDTV or remote control once for the next or previous channel, or hold it depressed until the desired channel is reached. Note: Channel up and down will only operate in DTV and TV modes - Vizio GV46LHDTV10A | User Manual - Page 44
not broadcast), language, program title, program start and end time, program rating and if CC is available. VIZIO GV46L HDTV User Manual When you press the INFO button on the remote, you not only get the information header displayed, but also a short summary of the program content when available - Vizio GV46LHDTV10A | User Manual - Page 45
VIZIO GV46L HDTV User Manual 3.7 Program Information Press the GUIDE button on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner of the panel. Press the or button to scroll up - Vizio GV46LHDTV10A | User Manual - Page 46
VIZIO GV46L HDTV User Manual Chapter 4 Adjustment of the HDTV 4.1 Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and - Vizio GV46LHDTV10A | User Manual - Page 47
VIZIO GV46L HDTV User Manual 4.2 Image Settings for TV and Video Inputs 4.2.1 Picture Mode When the MENU button is pressed, the On Screen able to see the detail in darker parts of the picture and if the . The menu page will disappear and be replaced by a smaller Contrast Indicator Bar so you - Vizio GV46LHDTV10A | User Manual - Page 48
VIZIO GV46L HDTV User Manual 4.2.4 Saturation Press the or button to highlight Saturation and then press the OK button to access this selection. The menu page will disappear and be replaced by a smaller Saturation Indicator Bar so you can see the color saturation level between the minimum (0) and - Vizio GV46LHDTV10A | User Manual - Page 49
Screen Display (OSD) appears on the Image Settings page. Press the button to highlight the Brightness selection. Press the OK button to access this selection. VIZIO GV46L HDTV User Manual The menu page will disappear and be replaced able to see the detail in darker parts of the picture and if the - Vizio GV46LHDTV10A | User Manual - Page 50
VIZIO GV46L HDTV User Manual 4.4 Advanced Image Settings for TV and Video Press the MENU button, then the button to select the Image Settings menu. Refer to section 4.2, Image Settings for TV ); 0 is off. 4.4.4 Backlight Press the or button to highlight Backlight and then press OK. Press the - Vizio GV46LHDTV10A | User Manual - Page 51
VIZIO GV46L HDTV User Manual 4.5 Advanced Image Settings for PC Press the MENU button, then the button to select the Image Settings menu. Refer to section 4.2, Image Settings for TV and Video Inputs, on page 47. Press the or button to highlight the Advanced selection and then press the OK button. - Vizio GV46LHDTV10A | User Manual - Page 52
The Backlight level does not affect the Brightness (black level) or Contrast (white level) of the picture, it adjusts the lamp current and this affects the overall brilliance of the picture. VIZIO GV46L HDTV User Manual 4.6 Display Settings When the MENU button is pressed, the On Screen Display - Vizio GV46LHDTV10A | User Manual - Page 53
VIZIO GV46L HDTV User Manual 4.7 Audio Settings When the MENU button is pressed, the On Screen Display (OSD) appears on Amp to control the volume. Variable Volume allows you to adjust the volume using the HDTV volume control. Note: This option is only available when the internal speakers are - Vizio GV46LHDTV10A | User Manual - Page 54
VIZIO GV46L HDTV User Manual 4.8 Parental Controls When the MENU button is pressed, the On Screen Display (OSD) appears on the Image Settings page. Press the button to change to the Parental Controls page. Press the OK button and the first of the 4 Password boxes will be highlighted. Enter the - Vizio GV46LHDTV10A | User Manual - Page 55
) • TV Youth 7 (older children) • TV G (general audience) • TV PG (guidance suggested) • TV 14 (strongly cautioned) • TV MA (mature audience) • Unblocked Press the or button to select Blocked or Unblocked. Press OK to save and exit. Press to return to the previous menu. VIZIO GV46L HDTV User Manual - Vizio GV46LHDTV10A | User Manual - Page 56
number buttons on the remote. Enter your new password again. Press OK. VIZIO GV46L HDTV User Manual 4.8.8 Resetting the Password When the MENU button is pressed, the On Screen Display (OSD) appears on the Image Settings page. Press the button to change to the Parental Controls page. Press the OK - Vizio GV46LHDTV10A | User Manual - Page 57
VIZIO GV46L HDTV User Manual 4.9 Setup for Video and PC When the MENU button is pressed, the On Screen Display (OSD) appears Note: Factory Reset does NOT reset the Parental Controls password. 4.9.3 Image Cleaner Not necessary for your GV46L HDTV. If the HDTV is left on for long periods (weeks) some - Vizio GV46LHDTV10A | User Manual - Page 58
VIZIO GV46L HDTV User Manual 4.10 Understanding Viewing Features Your LCD HDTV features four viewing modes and Picture-In-Picture (PIP)/Picture-by-Picture (POP) mode. You can switch viewing modes using the On Screen Display (OSD) or the remote control sides to fill the TV screen. The center of the - Vizio GV46LHDTV10A | User Manual - Page 59
VIZIO GV46L HDTV User Manual 4.10.2 PIP / POP Mode Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you can display two pictures at one time. One picture is displayed as the full screen (main screen press SWAP on the remote control. If you press SWAP - Vizio GV46LHDTV10A | User Manual - Page 60
VIZIO GV46L HDTV User Manual 4.11 Setting the Sleep Timer The Sleep Timer lets you set a time delay to turn off the LCD HDTV automatically. To set the Sleep Timer using the remote control: 1. Press the SLEEP button on the remote control. The Sleep Timer appears in the center of you screen. 2. - Vizio GV46LHDTV10A | User Manual - Page 61
VIZIO GV46L HDTV User Manual Chapter 5 Programming the VIZIO Universal Remote Control You can program the remote control to work with up to four different pieces of equipment including your VIZIO GV46L HDTV. Listed below are the steps for programming your VCR, Cable Box and DVD Player. 5.1.1 - Vizio GV46LHDTV10A | User Manual - Page 62
VIZIO remote uses codes 11758 and 10178 to work your LCD HDTV. To use a cable or satellite remote to work the LCD HDTV, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most Direct TV - Vizio GV46LHDTV10A | User Manual - Page 63
. Check your audio connection Press MUTE on the remote control again, so that MUTE disappears from the screen Check your audio settings, your TV audio may be set to SAP, speakers Off or min Press the Volume + (Up) key on your remote control Make sure that headphones are not connected Check your - Vizio GV46LHDTV10A | User Manual - Page 64
VIZIO GV46L HDTV User Manual Problem Solution Power is ON but no screen image. Make sure the video cable supplied with the TV is secured to the correct video output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top - Vizio GV46LHDTV10A | User Manual - Page 65
4:3 Televisions. The LCD HDTV has the capability of expanding this content so the entire screen is filled at the expense of image accuracy. To use this function, press the "ZOOM" key on the remote control and cycle among the available options. 6.3 Telephone & Technical Support Products are often - Vizio GV46LHDTV10A | User Manual - Page 66
VIZIO GV46L HDTV User Manual 6.4 Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act 6.5 FCC Class B Radio Interference Statement NOTE: This - Vizio GV46LHDTV10A | User Manual - Page 67
VIZIO GV46L HDTV User Manual Chapter 7 Miscellaneous Information 7.1 Specifications Specifications Panel 46" Diagonal, 16:9 Aspect Ratio Resolution 1366 x 768 pixels Pixel (Dot) Pitch 0.7455mm (H) x 0.7455mm (V) Display Compatibility HDTV (720P) Signal Compatibility 480i (SDTV), 480P (EDTV - Vizio GV46LHDTV10A | User Manual - Page 68
VIZIO GV46L HDTV User Manual 7.2 Glossary - Standard Definitions Analog TV: Today's TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV "aspect ratio", that is, the screen's width as compared to its height. For example, a "32 inch TV - Vizio GV46LHDTV10A | User Manual - Page 69
VIZIO GV46L HDTV User Manual 46 Parental Controls, 54 PC Image Settings, 49 Reset to Factory Default, 57 Selecting the Screen Size, 14, 43, 58, 68 Setup for Video and PC, 57 Sleep Timer, 60 Stepping through TV Channels, 43 Time Zone, 35 TV Preparation, 5 Safety Instructions, 2 Speaker Removal, 7 Wall - Vizio GV46LHDTV10A | User Manual - Page 70
your Cable or Satellite Remote to Operate your VIZIO TV, 62 RGB Connecting your PC, 30 S Screen Size explanation, 58 S-Video Connecting your DVD Player, 21, 22 T Technical Specifications, 67 VIZIO GV46L HDTV User Manual Technical Support, 65 Troubleshooting Guide, 63 TV Picture Adjust Brightness - Vizio GV46LHDTV10A | User Manual - Page 71
www.vizioce.com. Parts and service labor that are VIZIO's responsibility (see above) will be provided without charge. Other service is at the owner's expense. You must provide the model, serial number and date of purchase. Before you ask for warranty service, read your User Manual. You might avoid - Vizio GV46LHDTV10A | User Manual - Page 72
VIZIO GV46L HDTV User Manual 7.5 Component Program Codes Setup Code for VCR's ABS 21972 Admiral 20048, 20209 Aiko 20278 Aiwa 20037, 20479 Alienware 21972 America Action 20278 American High 20035 - Vizio GV46LHDTV10A | User Manual - Page 73
, 20032, 20033, 20636, 21972 STS 20042 Sylvania 20035, 20081, 20043 Systemax 21972 Tagar Systems 21972 Tashiko 20037 Version 7/6/2006 VIZIO GV46L HDTV User Manual Setup Code for VCR's Tatung 20045, 20067 Technics 20035, 20162 Teco 20035, 20037, 20048, 20038 Teknika 20035, 20037 - Vizio GV46LHDTV10A | User Manual - Page 74
01535 Hitachi 00819, 00222, 01250 HTS 00775 Hughes Network Systems 01142, 00749, 01749, 01442 I-Lo 01535 Version 7/6/2006 VIZIO GV46L HDTV User Manual Setup Code for Satellite Receivers JVC 00775 LG 01414, 01226 Magnavox 00724, 00722 Memorex 00724 Mitsubishi 00749 Motorola - Vizio GV46LHDTV10A | User Manual - Page 75
Sherwood 20770 Shinco 20717 Shinsonic 20533 Sonic Blue 20869, 21099 Sony 20533, 20864, 21033, 21904, 21903 Version 7/6/2006 VIZIO GV46L HDTV User Manual Setup Code for DVD Players SVA 20717 Sylvania 20675 Symphonic 20675 Teac 20717, 21984, 20809 Technics 20490 Theta Digital - Vizio GV46LHDTV10A | User Manual - Page 76
31273 Inkel 30027 Integra 30135 JBL 30110 Version 7/6/2006 VIZIO GV46L HDTV User Manual Setup Code for Audio Amp/Tuners JVC 30074, 31263 , 31276, 31176 Setup Code for TV's Addison 10092 Admiral 10093, 10463 76 www.VIZIOCE.com Setup Code for TV's Advent 10761, 10842 Aiko 10092 - Vizio GV46LHDTV10A | User Manual - Page 77
Fisher 10154 Fortress 10093 Fujitsu 10809, 10853 Funai 10180, 10171, 11904 Furi 10145 Futuretech 10180 Version 7/6/2006 VIZIO GV46L HDTV User Manual Setup Code for TV's Gateway 11756, 11755 GE 11447, 10047, 11454, 10051, 10451, 10180, 10030, 10178, 11917, 10092, 11907, 11922 - Vizio GV46LHDTV10A | User Manual - Page 78
10761 Princeton 10700 Prism 10051 Proscan 11447, 10047, 11922 Proton 10030, 10178 Pulsar 10017 Qingdao Version 7/6/2006 VIZIO GV46L HDTV User Manual Setup Code for TV's Quasar 10250, 10051, 11924, 10650 RadioShack 10047, 10154, 10180, 10030, 10178, 11920, 11904 RCA 11447, 10047 - Vizio GV46LHDTV10A | User Manual - Page 79
Setup Code for TV's TVS 10463 VIZIO 11758, 11756, 10885, 10864 Vector Research 10030 Victor 10250, 10053, 10650 Vidikron 10054 VIZIO GV46L HDTV User Manual Setup Code for TV's Vidtech 10178 Viewsonic 11755, 10885, 10864 Wards 10054, 10030, 10178, 10866, 11156 Warumaia 10661
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
 |
 |
VIZIO GV46L HDTV User Manual
Version 7/6/2006
1
www.VIZIOCE.com
Dear VIZIO Customer,
Congratulations on your new VIZIO GV46L High
Definition LCD Television purchase.
Thank you
for your support.
For maximum benefit of your set,
please read these instructions before making any
adjustments, and retain them for future reference.
We hope you will experience many years of
enjoyment from your new VIZIO GV46L High
Definition Television.
For assistance
, please call 714-668-0588 or e-
mail us at
.
To purchase or inquire about accessories and
installation services for your VIZIO LCD HDTV,
please visit our website at
www.vizioce.com
or
call toll free at
888-VIZIOCE (888-849-4623).
We recommend you register your VIZIO GV46L
HDTV either at our website
www.vizioce.com
or
fill in your registration card and mail it in.
For
peace of mind and to protect your investment
beyond the standard warranty, VIZIO offers on-
site extended warranty service plans.
These
plans
give
additional
coverage
during
the
standard warranty period.
Visit our website or call
us to purchase a plan.
Write down the serial number located on the back
of your GV46L.
__ __ __ __ __ __ __ __ __ __ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of V, Inc.
TruSurround XT, SRS and
symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
"DCDi by Faroudja" is a registered trademark of Genesis Microchip Inc.