Home » Vizio Manuals » Flat Panel Televisions » Vizio SV470XVT1A » Manual Viewer

Vizio SV470XVT1A SV470XVT HDTV User Manual - Page 34

Box, External TV Tuner or Satellite Receiver; please refer to Owner or User's Manual of such - has green screen

UPC - 857380001413

Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

VIZIO SV470XVT1A User Manual d. When finished, the Complete screen will be displayed to inform you that the HDTV has completed the Initial Setup. Press the button on the remote control to exit and begin watching TV. 5. Select Input Source Select the Input Source for the HDTV by pressing the INPUT button on the side of the TV or using the Input button on the remote control. Pressing this button will cycle you through the following options: TV, AV1/S-VIDEO, AV2, Component1, Component2, RGB, HDMI1, HDMI2, HDMI3 and HDMI4. Now follow the procedure below to display channels from a different signal (External TV Tuner, VCR, Cable Box or Satellite Receiver) source, using different inputs at the back of you TV set. a. Select the correct input connection; RF (DTV/TV) connector, Composite (Yellow, Red and White) connectors, Component (Red, Green, Blue plus Red and White) connectors, HDMI connectors or SeparateVideo (S-Video) plus Red and White connectors (if applicable). Make the physical connection or hook up. b. If you have an HD service you must use the HDMI (best) or Component connection. Note: Composite (AV) and S-Video Cables can only be used for SD (480i) pictures. c. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your TV set. If there is not picture, make sure you have selected the correct input on the TV set. d. If the selected input is RF, you should be aware that the TV set needs to be on either channel 3 or channel 4 matching the channel which has been selected on the back of the VCR, Cable Box, External TV Tuner or Satellite Receiver; please refer to Owner or User's Manual of such equipment for details. Note: The TV set will be displaying any television station or program selected by the Cable Box, VCR, External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used is the one which setup includes a box with two different outputs for two different (distant) rooms, then scanning channels would help you to find the signal. Be aware that the channel to be selected varies from provider to provider; meaning that, you may have to call your provider company so they could provide you the specific channel when using high definition made TV sets. Some examples of these channels are: 105, 106, 115 and 116. Version 6/2/2008 34 www.VIZIO.com

Section	Page
Chapter 1 Basic Controls and Connections	10
Front Bezel	10
1.2 Right Side Panel Controls	10
1.3 Rear Panel Connections	11
1.4 Right-Side Panel Connection	12
VIZIO Universal Remote Control	13
1.5.1 Insertion of Batteries in the Remote Control	16
1.5.2 Remote Control Range	16
1.5.3 VIZIO Universal Remote Control Precautions	16
Chapter 2 Connecting Equipment	17
2.1 Which Video Connection Should I Use?	17
2.2 Connecting Your Cable or Satellite Box	18
2.2.1 Using HDMI	18
2.2.2 Using Component Video	20
2.3 Connecting Coaxial (RF)	21
Using Your Antenna or Digital Cable for DTV	21
2.3.2 Using Your Antenna or Cable for TV	22
Using the Antenna or Cable through your VCR	22
2.4 Connecting Your DVD Player	23
2.4.1 Using HDMI	23
2.4.2 Using Component Video	25
2.4.3 Using S-Video (AV1)	26
2.4.4 Using Composite (AV) Video	27
2.5 Connecting Your VCR or Video Camera	28
2.6 Connecting an external Receiver/Amp	29
Optical Output of Audio received with HD Programs	29
2.7 Connecting a PC Computer	30
2.7.1 Preset PC Resolutions	31
2.7.2 Resolution (1920x1080) through RGB (15-Pin VGA) Input	31
Chapter 3 Setting Up to Watch Television	32
3.1 Basic LCD HDTV Start Up	32
3.2 Watching a TV Program	36
3.3 Adjusting Basic HDTV Settings	37
3.4 Program Information	38
Chapter 4 Advanced Adjustment of HDTV	39
4.1 Using the On Screen Display (OSD)	39
4.2 DTV / TV Input Picture Adjustment	40
Picture Mode	40
4.2.2 Backlight	40
Brightness	40
Contrast	41
4.2.5 Color	41
4.2.6 Tint	41
4.2.7 Sharpness	42
4.2.8 Advanced Video Features	42
Noise Reduction (SNR)	42
Color Enhancement	42
Advanced Adaptive Luma	43
Enhanced Contrast Ratio (DCR)	43
Color Temperature	43
Smooth Motion Effect	44
Real Cinema Mode	44
Precision Feature	44
Smooth Feature	44
Reset Picture Mode	45
4.3 DTV / TV Audio Adjustment	46
Audio Mode	46
Equalizer	46
4.3.3 Balance	46
4.3.4 Digital Audio Out	47
4.3.5 Speakers	47
4.3.6 Analog Audio Out	47
Lip Sync	47
Added Audio (Sound) Features	48
4.3.8 Wireless Speaker	48
4.3.9 Speaker Setting	48
Speakers Location	48
Speakers Distance	49
Trim	49
4.3.10 Wireless Sound Effect	50
4.3.11 Sound Effect	50
DRC (Dynamic Range Compression)	51
4.3.13 Reset Audio Mode	51
4.4 DTV / TV Tuner Setup	52
Tuner Mode	52
Auto Search	52
4.4.3 Partial Channel Search	53
4.4.4 Skip Channel	53
4.4.5 MTS	53
Time Zone	54
Daylight Saving	54
DTV / TV Input Setup	55
4.5.1 Language	55
4.5.2 PIP (Picture-in-Picture)	55
PIP Mode	55
PIP Source	56
PIP Position	56
PIP Size	56
PIP Audio Source	56
4.5.3 Sleep Timer	57
Wide	57
4.5.5 Input Naming	58
4.5.6 CC (Closed Caption)	59
4.5.7 H/V Position	60
4.5.8 DTV / TV Input Parental Control	61
Channel Block	62
US TV Rating	62
4.5.11 US Movie Rating (For US)	63
4.5.12 Canadian English Rating	63
4.5.13 Canadian French Rating	64
4.5.14 Check for DTV Rating	64
4.5.15 Blocked Unrated Programming	65
4.5.16 Change the Password	65
4.5.17 Reset All Settings	66
HDMI Input Picture Adjustment	67
4.7 HDMI Input Audio Adjustment	67
4.8 HDMI Input Setup	67
4.9 Video Input Picture Adjustment	68
Video Input Audio Adjustment	68
Video Input Setup	68
4.12 Auto Phase (for Component input)	69
Video Input Parental Control	69
4.14 PC Input Picture Adjustment	70
4.14.1 Auto Adjust	70
H-Position	70
4.14.3 V-Position	70
4.14.4 H-SIZE	71
4.14.5 V-SIZE	71
4.14.6 Fine Tune	71
4.15 PC Input Audio Adjustment	72
PC Input Setup	72
4.17 Understanding Viewing Features	73
4.17.1 Viewing Modes	73
4.17.2 Picture-In-Picture (PIP) Mode	74
4.17.3 Adjusting Basic PIP Settings	74
4.17.4 Programming for VCR	75
4.17.5 Programming for Cable Set-Top Box	75
4.17.6 Programming for DVD Player	76
4.17.7 Searching for Component Codes	76
4.18 Using a Cable or Satellite Remote	76
Chapter 5 Maintenance and Troubleshooting	77
5.1 Maintenance	77
5.2 Troubleshooting Guide	77
5.3 Wireless Speakers System and TV Pairing	79
5.4 Telephone & Technical Support	79
5.5 Compliance	80
5.6 FCC Class B Radio Interference Statement	80
Chapter 6 Miscellaneous Information	81
6.1 Specifications	81
6.2 Glossary – Standard Definitions	82
6.3 Index	83

Match case Limit results 1 per page

VIZIO SV470XVT1A User Manual

Version 6/2/2008

www.VIZIO.com

When finished, the Complete

screen will be displayed to inform

you that the HDTV has completed

the Initial Setup.

Press the

button on the

remote control to exit and begin

watching TV.

5. Select Input Source

Select the Input Source for the HDTV by

pressing the INPUT button on the side of the TV or using the Input button on the remote control.

Pressing this button will cycle you through the following options: TV, AV1/S-VIDEO, AV2,

Component1, Component2, RGB, HDMI1, HDMI2, HDMI3 and HDMI4.

Now follow the procedure below to display channels from a different

signal (External TV Tuner, VCR, Cable Box or Satellite Receiver) source,

using different inputs at the back of you TV set.

a. Select the correct input connection; RF (DTV/TV) connector,

Composite (Yellow, Red and White) connectors, Component (Red, Green,

Blue plus Red and White) connectors, HDMI connectors or Separate-

Video (S-Video) plus Red and White connectors (if applicable). Make the

physical connection or hook up.

b. If you have an HD service you must use the HDMI (best) or

Component connection.

Note:

Composite (AV) and S-Video Cables can only be used for SD (480i) pictures.

c. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a

picture on your TV set. If there is not picture, make sure you have selected the correct input on the

TV set.

d. If the selected input is RF, you should be aware that the TV set needs to be on either

channel 3 or channel 4 matching the channel which has been selected on the back of the VCR, Cable

Box, External TV Tuner or Satellite Receiver; please refer to Owner or User’s Manual of such

equipment for details.

Note:

The TV set will be displaying any television station or program selected by the Cable Box, VCR,

External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is

controlled by the equipment sending the signal.

If the service being used is the one which setup

includes a box with two different outputs for two different (distant) rooms, then scanning

channels would help you to find the signal. Be aware that the channel to be selected varies from

provider to provider; meaning that, you may have to call your provider company so they could

provide you the specific channel when using high definition made TV sets. Some examples of

these channels are: 105, 106, 115 and 116.