Vizio VO37LHDTV10A User Manual

Vizio VO37LHDTV10A - 37" LCD TV Manual

Vizio VO37LHDTV10A manual content summary:

  • Vizio VO37LHDTV10A | User Manual - Page 1
    VIZIO VO37L HDTV10A User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VO37L HDTV10A High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future
  • Vizio VO37LHDTV10A | User Manual - Page 2
    VIZIO VO37L HDTV10A User Manual THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR be used for long period of time. This will protect the VO37L HDTV10A LCD HDTV from damage due to power surges. • Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose
  • Vizio VO37LHDTV10A | User Manual - Page 3
    VIZIO VO37L HDTV10A User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against
  • Vizio VO37LHDTV10A | User Manual - Page 4
    shipping. Package Contents VIZIO VO37L HDTV10A VIZIO Remote Control VR3P VIZIO TV Stand Power Cord Premium Size Screen Cleaning Cloth This User Manual Quick Setup Guide Registration Card VIP Services Brochure 2 AA Batteries for the Remote Control VIZIO Warranty and Repair Information HDMI Cable
  • Vizio VO37LHDTV10A | User Manual - Page 5
    VIZIO VO37L HDTV10A User Manual Additional Certified Accessories for the VIZIO VO37L HDTV10A are sold separately Wall Mounts High Definition Cables Extra or replacement Remote VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VO37L HDTV10A To purchase or inquire
  • Vizio VO37LHDTV10A | User Manual - Page 6
    VIZIO VO37L HDTV10A User Manual Preparing Your LCD HDTV for Wall Mounting To remove the stand base 1. Unplug all of the cables and cords from your VO37L HDTV10A. 2. Place the VO37L HDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. 3. Push up
  • Vizio VO37LHDTV10A | User Manual - Page 7
    VIZIO VO37L HDTV10A User Manual Table of Contents Chapter 1 Basic Controls and Connections 9 1.1 Front Panel...9 1.2 Side Panel Controls...9 1.3 Rear Panel Connections ...10 1.4 Right-Side Panel Connection ...11 1.5 VIZIO Remote Control...12 1.5.1 Insertion of Batteries in the Remote Control 14
  • Vizio VO37LHDTV10A | User Manual - Page 8
    VIZIO VO37L HDTV10A User Manual 4.4.2 Auto Search...47 4.4.3 Partial Channel Search...48 4.4.4 Skip Channel ...48 4.4.5 MTS ...48 4.4.6 Time Zone ...48 4.4.7 Daylight Saving...49 4.5 DTV / TV Input Setup ...49 4.5.1 Language...49 4.5.2 PIP (Picture-in-Picture) ...49 4.5.3 Sleep Timer ...51 4.5.4
  • Vizio VO37LHDTV10A | User Manual - Page 9
    VIZIO VO37L HDTV10A User Manual Chapter 1 Basic Controls and Connections 1.1 Front Panel POWER 'VIZIO' LIGHT- The VIZIO name lights white when powered on and orange when powered off. REMOTE CONTROL SENSOR - This is the window through which all of the remote the following sequence: TV, AV1/S-Video,
  • Vizio VO37LHDTV10A | User Manual - Page 10
    1.3 Rear Panel Connections 1 3 4 5 VIZIO VO37L HDTV10A User Manual 8 9 10 2 6 7 1. SERVICE - This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer's warranty of this equipment. 2.
  • Vizio VO37LHDTV10A | User Manual - Page 11
    VIZIO VO37L HDTV10A User Manual 1.4 Right-Side Panel Connection 1. HEADPHONE - Connect your headphone for right audio inputs under the orange band. The purple color band on the side of the TV indicates this connection. Note: The red and white audio connectors are shared between AV2 and COMPONENT2
  • Vizio VO37LHDTV10A | User Manual - Page 12
    1.5 VIZIO Remote Control VIZIO VO37L HDTV10A User Manual GUIDE - This button displays program information. Press this button once when in TV mode and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen. In any
  • Vizio VO37LHDTV10A | User Manual - Page 13
    VIZIO VO37L HDTV10A User Manual INPUT - This button allows the user to cycle through the inputs. Repeatedly pressing of this button will step you through the input sources in the following sequence: TV, AV1/S-VIDEO, AV2, Component 1, Component 2, RGB, HDMI 1, HDMI 2 and HDMI 3. Once you have stepped
  • Vizio VO37LHDTV10A | User Manual - Page 14
    VIZIO VO37L HDTV10A User Manual 1.5.1 Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make VIZIO Remote Control Precautions The remote control should be kept dry and away from heat sources. Avoid humidity. If the TV responds erratically to the remote
  • Vizio VO37LHDTV10A | User Manual - Page 15
    User Manual Chapter 2 Connecting Equipment 2.1 Which Video Connection Should I Use? The VIZIO VO37L HDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays. Connection Quality (type) Connector Rear Panel Color Codes
  • Vizio VO37LHDTV10A | User Manual - Page 16
    VIZIO VO37L HDTV10A User Manual 2.2 Connecting Coaxial (RF) 2.2.1 Using Your Antenna or Digital Cable for DTV 1. Turn off the power to the HDTV. 2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA
  • Vizio VO37LHDTV10A | User Manual - Page 17
    VIZIO VO37L HDTV10A User Manual 2.3 Connecting Your HDTV Set-Top Box 2.3.1 Using HDMI Input HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Note: To maintain the display quality, use a VIZIO certified HDMI cable that is
  • Vizio VO37LHDTV10A | User Manual - Page 18
    For HDTV Set-Top Boxes with DVI: VIZIO VO37L HDTV10A User Manual 1. Turn off the power to the HDTV and HDTV Set-Top Box. 2. at the rear of the HDTV. 4. Turn on the power to the HDTV and HDTV Set-Top Box. 5. Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly
  • Vizio VO37LHDTV10A | User Manual - Page 19
    VIZIO VO37L HDTV10A User Manual 2.3.2 Using Component Video Connecting your HDTV Set-Top Box (Better): 1. Turn off the power to the HDTV and HDTV Set area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV. 4. Connect the Pr (red color) connector on
  • Vizio VO37LHDTV10A | User Manual - Page 20
    VIZIO VO37L HDTV10A User Manual 2.4 Connecting Your Basic Set-Top Box 2.4.1 Using Composite Video 1. Turn off the power to the HDTV and Set-Top Box. 2. Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the (yellow
  • Vizio VO37LHDTV10A | User Manual - Page 21
    VIZIO VO37L HDTV10A User Manual 2.5 Connecting Your DVD Player You have several options for connecting your DVD player to your VO37L HDTV10A; HDMI, Component rear of the HDTV. 3. Turn on the power to the HDTV and DVD player. 4. Select HDMI1 using the INPUT button on the remote or side of the HDTV
  • Vizio VO37LHDTV10A | User Manual - Page 22
    Players with DVI: VIZIO VO37L HDTV10A User Manual 1. Turn off the HDTV Turn on the power to the HDTV and your DVD player. 5. Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote. Note: Refer to your DVD player user manual
  • Vizio VO37LHDTV10A | User Manual - Page 23
    VIZIO VO37L HDTV10A User Manual 2.5.2 Using Component Video Connecting your DVD Player (Better): 1. Turn off the power to the HDTV and DVD player. area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV. 4. Connect the Pr (red color) connector on
  • Vizio VO37LHDTV10A | User Manual - Page 24
    VIZIO VO37L HDTV10A User Manual 2.5.3 Using S-Video (AV1/S-VIDEO) Connecting your DVD Player (Good): 1. Turn off the power to the HDTV and DVD player. 2. Connect the S-Video jack on the player to the S-Video jack in the (yellow/red area) at the rear
  • Vizio VO37LHDTV10A | User Manual - Page 25
    VIZIO VO37L HDTV10A User Manual 2.6 Connecting Your VCR or Video Camera 1. Turn off the HDTV and VCR or Video Camera. 2. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack
  • Vizio VO37LHDTV10A | User Manual - Page 26
    VIZIO VO37L HDTV10A User Manual 2.7 Connecting an external Receiver/Amp 1. Turn off the power to the LCD HDTV and Receiver connectors at the rear of the LCD HDTV. 3. Turn on the power to the LCD HDTV and Receiver/Amp. 4. Then press the button on the remote control to open the On-Screen
  • Vizio VO37LHDTV10A | User Manual - Page 27
    VIZIO VO37L HDTV10A User Manual 2.7.1 Optical Output of Audio received If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area) at the rear of the VO37L HDTV10A. 1. Turn off the power to the LCD HDTV and Receiver/Amp. 2. Using an
  • Vizio VO37LHDTV10A | User Manual - Page 28
    VIZIO VO37L HDTV10A User Manual 2.8 Connecting a PC Computer 1. Turn off the power to the HDTV and PC Computer. 2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end
  • Vizio VO37LHDTV10A | User Manual - Page 29
    VIZIO VO37L HDTV10A User Manual 2.8.1 Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at 60Hz for best picture quality (refer to the graphic card's user guide for questions on how to set this timing mode). Please see the table below for
  • Vizio VO37LHDTV10A | User Manual - Page 30
    VIZIO VO37L HDTV10A User Manual Chapter 3 Setting Up to Watch Television For 'Preparing Your LCD HDTV for Wall Mounting', see page 6. 3.1 Basic LCD HDTV Start Up 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord
  • Vizio VO37LHDTV10A | User Manual - Page 31
    time, press the button on the remote to highlight Skip Scan and then press the button. VIZIO VO37L HDTV10A User Manual Note: If you select Skip Scan, next time that you decide to complete this procedure; you will need to select the TV
  • Vizio VO37LHDTV10A | User Manual - Page 32
    search for Analog (NTSC) and Digital (ATSC) channels. VIZIO VO37L HDTV10A User Manual Note: DTV digital broadcast is not available in all areas completed the Initial Setup. Press the button on the remote control to exit and begin watching TV. 5. Select Input Source Select the Input Source for
  • Vizio VO37LHDTV10A | User Manual - Page 33
    VIZIO VO37L HDTV10A User Manual a. Select the correct input connection; RF (DTV/TV) connector, Composite (Yellow, Red and White) connectors, Component (Red, Green, Blue plus Red and White) connectors, HDMI connectors or Separate-Video (S-Video) plus Red and
  • Vizio VO37LHDTV10A | User Manual - Page 34
    select the Picture Mode option. VIZIO VO37L HDTV10A User Manual g. Press either or button to change the Picture Mode option pressing the Guide key: Press the Menu key, this will bring up the picture mode menu. new TV set is now ready to automatically reproduce the best picture quality out of
  • Vizio VO37LHDTV10A | User Manual - Page 35
    VIZIO VO37L HDTV10A User Manual 3.2 Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the
  • Vizio VO37LHDTV10A | User Manual - Page 36
    VIZIO VO37L HDTV10A User Manual 3.3 Adjusting Basic HDTV Settings Volume To increase the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote control until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH+
  • Vizio VO37LHDTV10A | User Manual - Page 37
    VIZIO VO37L HDTV10A User Manual 3.4 Program Information Press the GUIDE button twice on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the
  • Vizio VO37LHDTV10A | User Manual - Page 38
    VIZIO VO37L HDTV10A User Manual Chapter 4 Advanced Adjustment of HDTV 4.1 Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast,
  • Vizio VO37LHDTV10A | User Manual - Page 39
    VIZIO VO37L HDTV10A User Manual 4.2 DTV / TV Input Picture Adjustment 4.2.1 Picture Mode When the page. button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment Press the button to highlight the Picture Mode selection. Use the or button to choose from Custom, Standard,
  • Vizio VO37LHDTV10A | User Manual - Page 40
    VIZIO VO37L HDTV10A User Manual 4.2.3 Brightness Press the button to highlight the Contrast adjusts the white levels in the picture. If the contrast is too low the picture will look washed out and if the contrast is too high you will not be able to see any detail in the bright parts of a picture
  • Vizio VO37LHDTV10A | User Manual - Page 41
    the or button to adjust the level. VIZIO VO37L HDTV10A User Manual The Tint adjusts the hue of the picture. The easiest way to set tint or button to adjust the level. The Sharpness adjusts the sharpness of the picture. Once the adjustments are completed press the LAST button repeatedly to exit
  • Vizio VO37LHDTV10A | User Manual - Page 42
    VIZIO VO37L HDTV10A User Manual Advanced Adaptive Luma Press the button to highlight Advanced Adaptive Luma. Large areas of darkness in a picture will result in a lower Average Picture Level (APL) and the overall picture will look too dark; activation of this feature will raise the APL to
  • Vizio VO37LHDTV10A | User Manual - Page 43
    selection Press button to return on Picture settings to factory default. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Note: Only settings under the pictures adjustment tab will be reset. VIZIO VO37L HDTV10A User Manual Version 2/28/2008 43 www
  • Vizio VO37LHDTV10A | User Manual - Page 44
    VIZIO VO37L HDTV10A User Manual 4.3 DTV / TV Input Audio Adjustment 4.3.1 Audio Mode When the page. button is pressed, the On Screen Display (OSD) appears on the PICTURE want to boost the bass you would highlight 120Hz and turn it up. Once the adjustments are completed press the LAST button repeatedly to
  • Vizio VO37LHDTV10A | User Manual - Page 45
    VIZIO VO37L HDTV10A User Manual to highlight the Audio Line Out selection. Press either or button to turn the audio out signal to Fixed or Variable. When it is set the external speakers will change according to the volume setting on the TV. If it is fixed, the volume can only be changed by the
  • Vizio VO37LHDTV10A | User Manual - Page 46
    VIZIO VO37L HDTV10A User Manual 4.3.8 Lip Sync Included with the advanced technology of your TV, a feature which will compensate the shortcomings of signal transmission called audio sync (Lip Sync). Lip Only settings under the audio adjustment tab will be reset. Version 2/28/2008 46 www.VIZIO.com
  • Vizio VO37LHDTV10A | User Manual - Page 47
    VIZIO VO37L HDTV10A User Manual 4.4 DTV / TV Tuner Setup When you first used your HDTV you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu. Once the adjustments are
  • Vizio VO37LHDTV10A | User Manual - Page 48
    VIZIO VO37L HDTV10A User Manual repeatedly to exit the OSD completely. 4.4.4 Skip Channel After the TV has stored all of the available DTV channels in memory you the correct program times are shown after pressing the GUIDE button on the remote control. Press the selection. button to highlight the
  • Vizio VO37LHDTV10A | User Manual - Page 49
    VIZIO VO37L HDTV10A User Manual 4.4.7 Daylight Saving As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Press the button to highlight the Daylight Saving selection. Press the or
  • Vizio VO37LHDTV10A | User Manual - Page 50
    VIZIO VO37L HDTV10A User Manual PIP Input When PIP or POP is selected, Press the button to highlight the PIP input selection. Press the or button to choose the input source for the sub screen. The input sources available will vary according to which input is used for the main screen; see the table
  • Vizio VO37LHDTV10A | User Manual - Page 51
    VIZIO VO37L HDTV10A User Manual 4.5.3 Sleep Timer Press the selection. button to highlight the Sleep Timer Press the button to select the timer to turn-off the TV in 30, 60, 90 or 120 minutes. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4.5.4
  • Vizio VO37LHDTV10A | User Manual - Page 52
    VIZIO VO37L HDTV10A User Manual 4.5.5 Input Naming This feature has been added to facilitate you, the user in identifying or label the input and signal which is being watched. You could use up to 8 repeatedly to return to your program if task has been completed. Version 2/28/2008 52 www.VIZIO.com
  • Vizio VO37LHDTV10A | User Manual - Page 53
    VIZIO VO37L HDTV10A User Manual 4.5.6 CC (Closed Caption) Press the button to highlight the CC(Picture you press the key labeled mute on your Remote Control. Press button as many times as it to exit the OSD completely. Closed Caption for regular TV is usually CC1 or CC2. Digital Closed Caption
  • Vizio VO37LHDTV10A | User Manual - Page 54
    VIZIO VO37L HDTV10A User Manual to be displayed), Background Opacity (allows to either see through to highlight the H-Size selection. Press the button to start adjusting the horizontal size of the picture. Use the or button to adjust the horizontal size. Once the adjustments are completed press the
  • Vizio VO37LHDTV10A | User Manual - Page 55
    VIZIO VO37L HDTV10A User Manual 4.5.8 DTV / TV Input Parental Control If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been
  • Vizio VO37LHDTV10A | User Manual - Page 56
    VIZIO VO37L HDTV10A User Manual 4.5.10 US TV Rating Follow the procedure in the previous section to display the Parental Control menu and then press the button to highlight the US TV Rating selection. Press the button and the Block TV Rating panel will be displayed. In the Block TV Rating panel you
  • Vizio VO37LHDTV10A | User Manual - Page 57
    VIZIO VO37L HDTV10A User Manual 4.5.11 US Movie Rating (For US) Press the button to highlight the US Movie Rating selection. Press the button and the Block to navigate through the Movie rating options. Press the button to block (locked) or allow (unlocked). Version 2/28/2008 57 www.VIZIO.com
  • Vizio VO37LHDTV10A | User Manual - Page 58
    VIZIO VO37L HDTV10A User Manual 4.5.14 DTV Rating This option is designed to update the TV or Movie table of different ratings for programs being viewed in Press button to execute this operation. Please follow the on screen instructions to complete this procedure. Press either or to select and then
  • Vizio VO37LHDTV10A | User Manual - Page 59
    VIZIO VO37L HDTV10A User Manual 4.5.15 Blocked Unrated Programming Follow the procedure in the previous section 4.5.8 to display the Parental Control menu and then press the button to highlight the Block Unrated TV selection. Press the button to turn-on or turn-off the blocking of programming that
  • Vizio VO37LHDTV10A | User Manual - Page 60
    Settings selection. Press the button to reset the TV to the default factory settings. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Note: This does NOT reset the Parental Control Password. VIZIO VO37L HDTV10A User Manual Version 2/28/2008 60 www
  • Vizio VO37LHDTV10A | User Manual - Page 61
    VIZIO VO37L HDTV10A User Manual 4.6 HDMI Input Picture Adjustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.2. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4.7 HDMI Input Audio
  • Vizio VO37LHDTV10A | User Manual - Page 62
    VIZIO VO37L HDTV10A User Manual 4.9 Video Input Picture Adjustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.10 Video Input
  • Vizio VO37LHDTV10A | User Manual - Page 63
    Auto Phase. Press the button to execute this option. The TV will automatically look for the phase of the signal to fine tune the picture. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. VIZIO VO37L HDTV10A User Manual Version 2/28/2008 63 www
  • Vizio VO37LHDTV10A | User Manual - Page 64
    VO37L HDTV10A User Manual 4.12 Video Input Parental Control The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.5.8. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.13 PC Input Picture
  • Vizio VO37LHDTV10A | User Manual - Page 65
    VIZIO VO37L HDTV10A User Manual 4.13.3 Brightness Press the button to highlight the Contrast adjusts the white levels in the picture. If the contrast is too low the picture will look washed out and if the contrast is too high you will not be able to see any detail in the bright parts of a picture
  • Vizio VO37LHDTV10A | User Manual - Page 66
    VIZIO VO37L HDTV10A User Manual If you choose the Custom option, then a new menu will be highlight the Vertical Shift selection. Press the button to start adjusting the vertical position of the picture. Use the or button to adjust the vertical position. Once the adjustments are completed press the
  • Vizio VO37LHDTV10A | User Manual - Page 67
    VIZIO VO37L HDTV10A User Manual 4.13.9 Fine Tune Press the button to highlight the Fine Tune selection. way for the PC Input as for the DTV / TV input in section 4.3. The menu difference is that there are no icons along the top for DTV / TV and Parental Control adjustments. 4.15 PC Input Setup The
  • Vizio VO37LHDTV10A | User Manual - Page 68
    VIZIO VO37L HDTV10A User Manual 4.16 Understanding Viewing Features Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions in page 36. 4.16.1 Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is
  • Vizio VO37LHDTV10A | User Manual - Page 69
    VIZIO VO37L HDTV10A User Manual Chapter 5 Maintenance and Troubleshooting 5.1 Maintenance Important 1. Make sure that the power cable is removed from the socket before cleaning the TV. 2. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may
  • Vizio VO37LHDTV10A | User Manual - Page 70
    VIZIO VO37L HDTV10A User Manual Problem Solution Power is ON but no screen image. Make sure the video cable supplied with the TV is secured to the correct video output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top
  • Vizio VO37LHDTV10A | User Manual - Page 71
    VIZIO VO37L HDTV10A User Manual Tips for High-Definition Users. Tips for Letterbox Content Users. The LCD HDTV is an ideal platform for viewing High Definition Content. Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB. However,
  • Vizio VO37LHDTV10A | User Manual - Page 72
    VIZIO VO37L HDTV10A User Manual 5.4 Compliance Caution: Always use a power digital device, pursuant to Part 15 of the FCC accordance with the instructions, may cause harmful determined by turning the equipment off and on, the user is dealer or an experienced radio/TV technician for help. Notice:
  • Vizio VO37LHDTV10A | User Manual - Page 73
    VIZIO VO37L HDTV10A User Manual Chapter 6 Miscellaneous Information 6.1 Specifications Specifications Panel 37" Diagonal, 16:9 Aspect Ratio Resolution adjustment for user fine tuning of color temperature, Gamma correction, Picture Enhancement, Sound Enhancement, Computer support at 640x480,
  • Vizio VO37LHDTV10A | User Manual - Page 74
    VIZIO VO37L HDTV10A User Manual Certifications CSA C/US, FCC Class B *Product specifications may change without notice or obligation. 6.2 Glossary - Standard Definitions Analog TV: Today's TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3):
  • Vizio VO37LHDTV10A | User Manual - Page 75
    VIZIO VO37L HDTV10A User Manual 6.3 Index A Accessories, 5 Adjustments Selecting the Screen Size, 74 Stepping through TV Channels, 36 Volume, 9, 36, 69 Advanced Video Features Black Level Extender, 41 Color Temperature (Color Temperature, 42 CTI (Color Transient Improvement, 42 DNR (Dynamic Noise
  • Vizio VO37LHDTV10A | User Manual - Page 76
    your VCR, 25 Connecting your Video Camera, 25 T Technical Specifications, 73 Troubleshooting Guide, 69 TV Audio Adjustment, 44 VIZIO VO37L HDTV10A User Manual Parental Control, 55 Picture Adjustment, 39 Special Features, 49 TV Audio Adjust Balance, 45 Digital Audio Out, 45 Equalizer, 44 Line Out
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

VIZIO VO37L HDTV10A User Manual
Version 2/28/2008
1
www.VIZIO.com
Dear VIZIO Customer,
Congratulations on your new VIZIO VO37L
HDTV10A
High
Definition
LCD
Television
purchase.
Thank you for your support.
For
maximum benefit of your set, please read these
instructions before making any adjustments, and
retain them for future reference.
We hope you will
experience many years of enjoyment from your
new VIZIO VO37L HDTV10A High Definition
Television.
For assistance
, please call
(877)-698-4946
or e-
mail us at
.
To purchase or inquire about accessories and
installation services for your VIZIO LCD HDTV,
please visit our website at
www.vizio.com
or call
toll free at
(888)-849-4623.
We recommend you register your VIZIO VO37L
HDTV10A either at our website
www.VIZIO.com
or fill in your registration card and mail it in.
For
peace of mind and to protect your investment
beyond the standard warranty, VIZIO offers on-
site extended warranty service plans.
These
plans
give
additional
coverage
during
the
standard warranty period.
Visit our website or call
us to purchase a plan.
Write down the serial number located on the back
of your VO37L HDTV10A.
L
__ __ __ __ __ __ __ __ __ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and “High Definition Multimedia Interface”
are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.