Vizio VSB200 VSB200 User Manual
Vizio VSB200 - V - Sound Bar Speaker Manual
 |
UPC - 845226002373
View all Vizio VSB200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Vizio VSB200 manual content summary:
- Vizio VSB200 | VSB200 User Manual - Page 1
VIZIO VSB200 User Manual Dear VIZIO Customer, Congratulations on your new VIZIO High Definition Sound Bar purchase. Thank you for your support. For maximum benefit, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many - Vizio VSB200 | VSB200 User Manual - Page 2
Adapters. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. • Only power of the marked voltage can be used for your HD Sound Bar. Any other voltage than the specified voltage may cause fire or electric shock • The power cord must be replaced - Vizio VSB200 | VSB200 User Manual - Page 3
with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator. • If any of the following occurs, contact the dealer: o The power cord fails or frays. o Liquid sprays or any object drops into your HD Sound Bar. o HD Sound Bar is - Vizio VSB200 | VSB200 User Manual - Page 4
for future shipping. Package Contents VIZIO High Definition Sound Bar 1x AC/DC Power Adapter* 1x Power Cord* 1x Remote Control and Battery 2x Stand/Mount Base (Pre-installed) 2x Stand/Mount screws (Pre-installed) 1x RCA Stereo Cable* This manual* Quick Start Guide* *Not shown in illustration 4 www - Vizio VSB200 | VSB200 User Manual - Page 5
VIZIO VSB200 User Manual Table of Contents Important Safety Instructions ...2 Chapter 1 Installation...6 Chapter 2 Basic Controls and Connections ...7 Rear Panel Connections...7 Top Panel Buttons ...8 HD Sound Bar Remote Control ...9 Programming a Universal Remote to operate the HD Sound Bar - Vizio VSB200 | VSB200 User Manual - Page 6
re-attach to the HD Sound Bar in the configuration shown in Fig. 2. Use M5 (Metric) or #10 (English) screws for keyhole to mount. Figure 1 Figure 2 NOTE: It is recommended that Power and Audio cables be connected to the HD Sound Bar before placing it on the wall. . 6 www.VIZIO.com - Vizio VSB200 | VSB200 User Manual - Page 7
from the AC/DC Power Adapter here. 2. OPTICAL AUDIO IN - SPDIF Optical connector for connection from a device such as a home theatre system, Amplifier, Receiver, Set Top Box or DVD Player. 3. SUB OUT- (Analog Sub-Woofer Out) Connect to an amplified subwoofer input. Do NOT connect this directly - Vizio VSB200 | VSB200 User Manual - Page 8
VIZIO VSB200 User Manual Top Panel Buttons 1. Power - Use this button to turn HD Sound Bar ON or OFF. 2. Input - Use this button to select the input desired. Repeated pressing will cycle through Analog Input 1, Analog Input 2 or Optical In. 3. Vol - - Pressing this button will decrease the volume - Vizio VSB200 | VSB200 User Manual - Page 9
HD Sound Bar Remote Control The VIZIO Remote Control supplied is designed to be used exclusively with this product. The remote button functions are described below: 1. Power - Use this button to turn HD Sound Bar ON or OFF. 2. Input - Use this button to select the input desired. Repeated pressing - Vizio VSB200 | VSB200 User Manual - Page 10
Volume Lock (when using a VIZIO Universal remote with the Sound Bar) VIZIO Universal remotes are normally set to control the volume of the TV, even when one of the other programmable devices is selected. The remote control can be set to control the device volume, the Sound Bar in this case, by - Vizio VSB200 | VSB200 User Manual - Page 11
Remote Control. Note: When using the Optical Input on the HD Sound Bar, be sure to set the source device output mode to PCM. Refer to the TV user manual for more information about the audio output settings of the product. *SPDIF Cable available separately. Analog Connection: 1. Turn off the power - Vizio VSB200 | VSB200 User Manual - Page 12
VIZIO VSB200 User Manual Connecting a Cable or Satellite Box *Digital Connection: 1. Turn off the power to the HD Sound Bar and Set-Top Box. 2. Connect one end of the Optical (SPDIF) cable to the digital audio output on the Satellite or Cable Set-Top Box. 3. Connect the other end of the Optical ( - Vizio VSB200 | VSB200 User Manual - Page 13
DVD Player 3. Connect the other end of the Optical (SPDIF) cable to the Digital audio input on the HD Sound Bar. 4. Turn on the power to the HD Sound Bar and CD or DVD Player. 5. Select the Optical input by pressing the Input Button on the top of the HD Sound Bar or Remote Control. Note: When using - Vizio VSB200 | VSB200 User Manual - Page 14
VIZIO VSB200 User Manual Connecting a MP3 Player 1. Turn off the power to the HD Sound Bar and MP3 Player. 2. Connect one end of the audio cable to the analog audio output on the MP3 Player Docking Unit*. 3. Connect the other end of the audio cable (white and red connectors) to one of the analog - Vizio VSB200 | VSB200 User Manual - Page 15
Receiver/Amp 3. Connect the other end of the Optical (SPDIF) cable to the Digital audio input on the HD Sound Bar. 4. Turn on the power to the HD Sound Bar and Receiver/Amp. 5. Select the Optical input by pressing the Input Button on the top of the HD Sound Bar or Remote Control. Note: When using - Vizio VSB200 | VSB200 User Manual - Page 16
VIZIO VSB200 User Manual Connecting a Computer *Digital Connection: If your Computer has a SPDIF (optical) digital audio output, you can connect it to the OPTICAL AUDIO IN on the HD Sound Bar 1. Turn off the power to the HD Sound Bar and Computer. 2. Connect one end of the Optical (SPDIF) cable to - Vizio VSB200 | VSB200 User Manual - Page 17
purchased separately, and the instructions for preparation and operation have been followed. 2. Turn off the power to the HD Sound Bar and subwoofer. 3. Connect one end of a single RCA audio cable* to the SUB OUT connection on the Sound Bar. 4. Connect the other end of the audio cable to the sub or - Vizio VSB200 | VSB200 User Manual - Page 18
one end of the Sub-Woofer audio cable to SUB OUT (3) on the back of the HD Sound Bar, and the other end to the Analog Sub-Woofer Input of the Stereo/Home Theater System. The output is shown in figure 1 above. 3. Before connecting the AC cord to an outlet, connect the HD Sound Bar power adapter - Vizio VSB200 | VSB200 User Manual - Page 19
enable it by pressing the 'TVOL' button on the remote control. Then set the volume to the desired listening level. SRS TruVolume will do the rest. TruVolume will maintain a constant volume level regardless of the device(s) connected to the Sound Bar. Note: SRS TruVolume does have a nominal effect on - Vizio VSB200 | VSB200 User Manual - Page 20
' button on the remote and TruSurround HD will provide a realistic, immersive surround sound experience. No need to purchase extra speakers or run wires around the home. By merely connecting the Sound Bar to the chosen audio source via composite cables or a digital TOSlink® cable allows the listener - Vizio VSB200 | VSB200 User Manual - Page 21
button on the Remote Control or on the Sound Bar will toggle SRS TruSurround HD ON and OFF. Chapter 6 Error Detection / Corrective Action If an unsupported rate or sample depth is detected (via the Optical Input), or an overcurrent or thermal shutdown occurs, the LED's flash certain error codes. An - Vizio VSB200 | VSB200 User Manual - Page 22
adapter is glowing green. Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying power. Press the Power button on the remote control or the top of the HD Sound Bar. Press the Volume + (Up) button on the remote control or the top of the 22 www.VIZIO - Vizio VSB200 | VSB200 User Manual - Page 23
an alternate device or replace the audio cable. Test the device and cable on an alternate input on the HD Sound Bar. When the Sound Bar is powered off, settings are retained except when the AC power is removed. To keep settings, Leave AC/DC power adapter connected to AC. Otherwise, they will return - Vizio VSB200 | VSB200 User Manual - Page 24
VIZIO VSB200 User Manual Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act FCC Class B Radio Interference Statement NOTE: This equipment has - Vizio VSB200 | VSB200 User Manual - Page 25
Power Input Voltage VSB200 4 x 3" High Efficiency mid/bass transducers / 2 x 3/4" High Performance Aluminum Dome Tweeters 80Hz to 20 kHz Integrated Class D @ 15x2 channel w/ .01% THD 35Hz up to 80Hz SPDIF 1 rear of HD Sound Bar Stereo Audio 2 rear of HD Sound Bar DC (24V) 1 rear of HD Sound - Vizio VSB200 | VSB200 User Manual - Page 26
VIZIO VSB200 User Manual Limited Product Warranty 26 www.VIZIO.com - Vizio VSB200 | VSB200 User Manual - Page 27
Version 7/16/2009 27 www.VIZIO.com - Vizio VSB200 | VSB200 User Manual - Page 28
VIZIO VSB200 User Manual 28 www.VIZIO.com - Vizio VSB200 | VSB200 User Manual - Page 29
Detection 21 H Home Theater Connection 15 I Installation 6 L LED Blink Codes 21 M Maintenance 22 MP3 Player Connection 14 R Receiver Connection 15 Remote Control 9 Battery 10 Range 10 Programming VIZIO Universal Remote 9 S Safety Instructions 2, 3 Satellite Box Connection 12 Setup 18
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
VIZIO VSB200 User Manual
Version 7/16/2009
1
www.VIZIO.com
Dear VIZIO Customer,
Congratulations on your new VIZIO High Definition Sound Bar purchase.
Thank you for your support.
For maximum benefit, please read these
instructions before making any adjustments, and retain them for future
reference.
We hope you will experience many years of enjoyment from
your new VIZIO HD Sound Bar.
For assistance, please call (877) 668-8462 or visit us at
www.vizio.com
To purchase or inquire about accessories and installation services for your
VIZIO HD Sound Bar, please visit our website at
www.vizio.com
or call toll
free at (888) 849-4623.
We recommend you register your VIZIO HD Sound Bar at our website
www.VIZIO.com
or fill in your registration card and mail it in. For peace of
mind and to protect your investment beyond the standard warranty, VIZIO
offers extended warranty service plans. These plans give additional
coverage during the standard warranty period. Visit our website or call us
to purchase a plan.
Write down the serial number located on the back of your HD Sound Bar.
__ __ __ __ __ __ __ __ __ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
and
are trademarks of SRS Labs, Inc.
TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs, Inc.
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS; IMAGES USED ARE FOR
ILLUSTRATION PURPOSES ONLY. BRAVO, VIZIO AND THE V LOGO AND WHERE VISION MEETS VALUE AND OTHER VIZIO
TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO INC.
PRODUCT SPECIFICATIONS ARE SUBJECT TO
CHANGE WITHOUT NOTICE OR OBLIGATION. © 2008 VIZIO INC. ALL RIGHTS RESERVED.