Vtech CS6429-4 User Manual (CS6429-4 User Manual) - Page 19

Telephone settings Home area code If you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log. 1. Press MENU/SELECT when the handset is not in use. 2. Press or to select >SETTINGS, then press MENU/SELECT. >HOME AREA CODE DIAL MODE 3. Press or to select >HOME AREA CODE, then press MENU/SELECT. 4. Use the dialing keys to enter the desired home area code. HOME AREA CODE --- • Press MUTE/DELETE to delete a digit. • Press and hold MUTE/DELETE to delete the entire entry. 5. Press MENU/SELECT to save the selection. You hear a confirmation tone. If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed, following the steps above. After you have deleted the home area code, _ _ _ will appear in the display. Dial mode The default dial mode is tone dialing. If you have pulse (rotary) service, you need to change the dial mode to pulse dialing before using the telephone. 1. Press MENU/SELECT when the handset is not in use. 2. Press or to select >SETTINGS, then press MENU/SELECT. >DIAL MODE LCD LANGUAGE 3. Press or to select >DIAL MODE, then press MENU/SELECT. 4. Press or to choose TONE or PULSE. DIAL MODE >TONE 5. Press MENU/SELECT to save your selection. You hear a confirmation tone. 15