Vtech DS6321-2 User Manual

Vtech DS6321-2 Manual

Get Vtech DS6321-2 PDF manuals and user guides View all Vtech DS6321-2 manuals
Add to My Manuals
Save this manual to your list of manuals

Vtech DS6321-2 manual content summary:

  • Vtech DS6321-2 | User Manual - Page 1
    User's manual w w w.v t e c h p h o n e s .c o m Models: DS6321-2/DS6321-3/ DS6321-4/DS6322-3/ DS6322-4
  • Vtech DS6321-2 | User Manual - Page 2
    product. Before using this telephone, please read the Important safety instructions on page 87 of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation
  • Vtech DS6321-2 | User Manual - Page 3
    4 Battery charging 5 Installation options 6 Tabletop to wall mount installation 6 Wall mount to tabletop installation 7 Handset layout 8 Telephone base layout 10 Handset main menu 11 Bluetooth 12 Introducing Bluetooth 12 Glossary of terms 13 Bluetooth setup 14 Pair a cell phone 14
  • Vtech DS6321-2 | User Manual - Page 4
    72 Battery 74 Expand your telephone system..75 Add and register a handset.........75 Replace a handset 76 Troubleshooting 77 Important safety instructions......87 Precautions for users of implanted cardiac pacemakers 88 Operating range 88 Maintenance 88 About cordless telephones.........89
  • Vtech DS6321-2 | User Manual - Page 5
    warranty service is necessary. Quick start guide User's manual Telephone line cord Telephone base power adapter Battery compartment covers (2 for DS6321-2, 3 for DS6321-3 and DS6322-3, and 4 for DS6321-4 and DS6322-4) Wall bracket Batteries (2 for DS6321-2, 3 for DS6321-3 and DS6322-3, and
  • Vtech DS6321-2 | User Manual - Page 6
    of where you install the telephone base in order to maintain a reliable connection between your Bluetooth wireless technology enabled cell phone, telephone base and cell tower. This product may be shipped with a protective sticker covering the handset and/or telephone base display. Remove it before
  • Vtech DS6321-2 | User Manual - Page 7
    switch. If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL
  • Vtech DS6321-2 | User Manual - Page 8
    THIS SIDE UP facing up and the wires inside the battery compartment. 4. Align the cover flat against the battery compartment, then slide it towards the center of the handset until it clicks into place. 5. Charge the handset by placing it in the telephone base or charger. The CHARGE light is on when
  • Vtech DS6321-2 | User Manual - Page 9
    you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged
  • Vtech DS6321-2 | User Manual - Page 10
    plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the mounting plate. Tabletop to wall mount installation 1. If you are using a DSL filter, plug the line cord into the filter now. Plug the telephone line cord (or DSL filter
  • Vtech DS6321-2 | User Manual - Page 11
    Getting started Wall mount to tabletop installation 1. If the telephone line cord and power adapter cord are bundled, untie them first. 2. Slide the black wall bracket up and remove it from the wall plate. Unplug the telephone line cord (or DSL filter) from the wall. Unplug the power adapter from
  • Vtech DS6321-2 | User Manual - Page 12
    reviewing a call log entry, press repeatedly to add or remove 1 in front of the telephone number service (page 43). Press to make or answer a home call using the handset speakerphone (page 39). During a call, press to switch between speakerphone and handset (page 43). REDIAL/PAUSE Press to review
  • Vtech DS6321-2 | User Manual - Page 13
    (page 39). While the handset is ringing, press to silence the ringer temporarily (page 43). Press and hold while the telephone is not in use to the listening volume (page 43). When the handset is not in use, press to review the call log (page 59). # While reviewing a call log entry or a directory
  • Vtech DS6321-2 | User Manual - Page 14
    there is an incoming call, or another telephone sharing the same line is in use. On when the handset is in use. 10 X/DELETE Press to delete the message currently playing (page 65). When the phone is not in use, press twice to delete all previously reviewed messages (page 66). /SKIP Press to skip
  • Vtech DS6321-2 | User Manual - Page 15
    numbers. Ans. system Directory Call log Intercom Bluetooth Call log - review the caller ID history or delete all call log entries. Ans. system Directory Call log Intercom Bluetooth Intercom - intercom call with a system handset. Ans. system Directory Call log Intercom Bluetooth Bluetooth - set up
  • Vtech DS6321-2 | User Manual - Page 16
    Bluetooth Introducing Bluetooth Your new DS6321/6322 telephone system with Bluetooth wireless technology has the following features: • Pair up to four Bluetooth enabled cell phones with the telephone base. • Connect a maximum of two cell phones to make and receive cell calls. Only one cell phone can
  • Vtech DS6321-2 | User Manual - Page 17
    terms Below are some terms used in this user's manual to help you become familiar with using your Bluetooth enabled devices and your new DS6321/6322 telephone system. Active devices - a maximum of two paired devices (two cell phones, or one cell phone and one headset) on the active devices list can
  • Vtech DS6321-2 | User Manual - Page 18
    pair and connect your Bluetooth device(s) with the telephone base. All DS6321/6322 handsets can be used to make or answer on the cell phone line. Bluetooth wireless technology operates within a short range. When you pair a Bluetooth cell phone or Bluetooth headset to the telephone base, move closer
  • Vtech DS6321-2 | User Manual - Page 19
    (page 21). Base name: VTech DS6321 PIN:0000 Cellular setup completed Device connected If you have trouble pairing your cell phone, it may not be compatible with your DS6321/6322. Check the Bluetooth compatibility list at www.vtechphones.com. • The pairing process may take up to one minute. If the
  • Vtech DS6321-2 | User Manual - Page 20
    user's manual to learn how to search for or add new Bluetooth devices. Ans. system Directory Call log To pair and connect a headset: 1. Press MENU/SELECT on the handset when it is not in use. Intercom Bluetooth 2. Press or to highlight Bluetooth already connected to the telephone base, the screen
  • Vtech DS6321-2 | User Manual - Page 21
    . If you have trouble pairing your headset, it may not be compatible with your DS6321/6322. Check the Bluetooth compatibility list at www.vtechphones.com. • The pairing process may take up to one minute. If the pairing process fails, try again. • If you put the handset back in the telephone base or
  • Vtech DS6321-2 | User Manual - Page 22
    or to the left. 7. Press MENU/SELECT to confirm. The handset displays Device renamed. Ans. system Directory Call log Intercom Bluetooth BLUETOOTH Add cellular Add headset Active devices Paired devices SELECT DEVICE Headset A Cell Phone AC Connect Rename Remove paired ENTER NEW NAME Headset A _ 18
  • Vtech DS6321-2 | User Manual - Page 23
    SELECT. 6. Press MENU/SELECT to confirm. The handset displays Device removed from paired list. Ans. system Directory Call log Intercom Bluetooth BLUETOOTH Add cellular Add headset Active devices Paired devices SELECT DEVICE Headset A Cell Phone AC Connect Rename Remove paired Remove device from
  • Vtech DS6321-2 | User Manual - Page 24
    a Bluetooth connection with the telephone base. Although two paired devices can be connected to the telephone base, only one Bluetooth cell phone or two minutes to reconnect. Review the active devices list 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to highlight Bluetooth
  • Vtech DS6321-2 | User Manual - Page 25
    you already have two devices on the active devices list, you can replace an active device with a device on the paired devices list. To replace an active device: Ans. system Directory 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to highlight Bluetooth, then press Call
  • Vtech DS6321-2 | User Manual - Page 26
    Bluetooth BLUETOOTH Download dir Add cellular Add headset Active devices 5. When Add displays, press MENU/SELECT. You are prompted to select a device from the paired devices list. SELECT DEVICE 6. Press or to select one paired device, then press 1 Cell Phone A MENU/SELECT. The handset displays
  • Vtech DS6321-2 | User Manual - Page 27
    it is still on the paired devices list. 1 Cell Phone B 2 Cell Phone CC Change PIN You are required to enter a PIN when establishing a Bluetooth connection. The default Pin of your telephone base is 0000. To change the PIN: 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to
  • Vtech DS6321-2 | User Manual - Page 28
    the handset battery is charged for at least 10 minutes. Place your cell phone next to the telephone base when you download a cell phone directory to your DS6321/6322. To download a cell phone directory: 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to highlight Bluetooth
  • Vtech DS6321-2 | User Manual - Page 29
    memory, see the user's manual of your cell phone. • When downloading the directory from your Bluetooth enabled cell phone, some data may not transfer. For example, if you have home, mobile and work numbers for a particular contact, the three categories may not transfer to your DS6321/6322. • For
  • Vtech DS6321-2 | User Manual - Page 30
    , do steps one through four on page 24. The download process continues even if any of the following occur: • You receive or make calls on the home line. • You place the handset in the telephone base or charger. • You access your cell phone menu features. • The handset battery becomes depleted or
  • Vtech DS6321-2 | User Manual - Page 31
    Telephone settings Ringers (handset) In the ringers menu, you can select the ringer tones and adjust the ringer volume for incoming calls to the home and cell lines. Ringer volume (handset) You can adjust the ringer volume for the incoming home and cell calls. To adjust the handset ringer volume:
  • Vtech DS6321-2 | User Manual - Page 32
    Telephone settings Ringer tone You can select the ringer tones for the incoming home and cell calls. To select a ringer tone: 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to highlight Ringers, then press MENU/SELECT. 3. Press or to highlight Ringer tone, then press MENU/
  • Vtech DS6321-2 | User Manual - Page 33
    Telephone settings Settings In the settings menu, you can change and edit the settings çais or Español to be used in all screen displays. To select a language: 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to highlight Settings, then press MENU/SELECT. 3. Press MENU/SELECT to
  • Vtech DS6321-2 | User Manual - Page 34
    your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal that turns on the indicators. To manually turn off these indicators: 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to highlight Settings, then
  • Vtech DS6321-2 | User Manual - Page 35
    time The answering system announces the day and time of each message prior to playing it. If you subscribe to caller ID service, the day, information. Before using the answering system, set the date and time as follows. To change the setting: 1. Press MENU/SELECT on the handset when it is not in
  • Vtech DS6321-2 | User Manual - Page 36
    (rotary) service, you must change the dial mode to pulse dialing before using the telephone. To change the setting: 1. Press MENU/SELECT on the handset when it area, the telephone number is automatically stored without the area code in the call log. 800-595-9511 When you review any directory,
  • Vtech DS6321-2 | User Manual - Page 37
    not need to program your cell area code. If your cell phone stores entries in a 7-digit format, we recommend that you program your cell area code so that your 7-digit directory entries can be dialed correctly using your home line. While reviewing an entry in the call log or directory, you can press
  • Vtech DS6321-2 | User Manual - Page 38
    calls and records messages only on the home line. If your paired cell phone has voicemail, callers will leave messages with that voicemail service. When the answering system is turned on, the /ANS ON/OFF light on the telephone base is on and the handsets display ANS ON. To turn the answering
  • Vtech DS6321-2 | User Manual - Page 39
    Answering system settings Announcement The telephone is preset with a greeting that answers calls with "Hello, please leave a message after the tone." You can use this preset announcement, or replace it with your own. Play your announcement 1. Press MENU/SELECT on the handset when it is not in use.
  • Vtech DS6321-2 | User Manual - Page 40
    2. To record, press 7." Press 3 to delete your own recorded announcement. The handset announces, "Announcement deleted." When your announcement is deleted, calls are answered with the preset announcement. ANS. SYSTEM Play messages Announcement Delete all old Record memo ANNOUNCEMENT 2-Play 3-Delete
  • Vtech DS6321-2 | User Manual - Page 41
    telephone base to a caller leaving a message. You can turn this feature on or off with a system handset. To change the setting: 1. Press MENU/SELECT on the handset can choose from two, four, or six rings; or toll saver. With toll saver selected, the answering system answers after two rings when you
  • Vtech DS6321-2 | User Manual - Page 42
    alert tone When the answering system is turned on, the telephone beeps every 10 seconds to alert you of new messages. The tone stops when all new messages have been reviewed. The message alert tone is preset to off. To change the setting: 1. Press MENU/SELECT on the handset when it is not in
  • Vtech DS6321-2 | User Manual - Page 43
    /CLEAR or put the handset in the telephone base or charger. • If you answer a call using a headset, and you lose the Bluetooth connection or the battery is depleted, the call will be lost. • If you are using a headset for a call which is transferred from a DS6321/6322 handset, and you lose the
  • Vtech DS6321-2 | User Manual - Page 44
    You can connect a maximum of two Bluetooth enabled cell phones to the telephone base, but only one cell phone can be used on a cell call at a time. All DS6321/6322 handsets can be used to make or answer calls on the cell phone line. To make a cell call: • Enter the telephone number, then press /CELL
  • Vtech DS6321-2 | User Manual - Page 45
    cell call: • Press OFF/CLEAR on the handset. The home line is still on hold. All handsets display Home call on hold. To resume the home call on hold: • Press /HOME/FLASH on the handset. Cell phone voicemail If you have voicemail service active on your cell phone, and you do not answer the incoming
  • Vtech DS6321-2 | User Manual - Page 46
    via the home line at the same time. These are both Bluetooth devices and only one can be used at a time. • If you are on a call using the cell line, you cannot join the call using your paired cell phone. However, you can join the call using another DS6321/6322 handset. Your cell phone is being used
  • Vtech DS6321-2 | User Manual - Page 47
    phone. On some cell phones, changing the volume on the cell phone effects your cell call volume on the DS6321/6322 handset. Silence the ringer When the telephone Microphone ON. Temporary tone dialing If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily
  • Vtech DS6321-2 | User Manual - Page 48
    appears and /CELL flashes. To resume a cell call on hold: • Press /CELL. Handset locator This feature helps you find a misplaced handset. To start paging: • Press /FIND HANDSET on the telephone base when it is not in use. All idle handsets ring and display ** Paging **. To end paging: • Press /FIND
  • Vtech DS6321-2 | User Manual - Page 49
    Telephone operation Chain dialing Use this feature to initiate a dialing sequence PAUSE until the desired number displays, then press MENU/SELECT. If you do not press MENU/SELECT within two seconds, the number displayed will be dialed automatically. • You cannot edit a directory entry while on a
  • Vtech DS6321-2 | User Manual - Page 50
    20 entries, the oldest entry is deleted to make room for the new entry. Entries are shown in reverse chronological order. Review the redial list 1. Press REDIAL/PAUSE when the handset is not in use. 2. Press , or REDIAL/PAUSE to browse. You hear a double beep when you reach the beginning or end
  • Vtech DS6321-2 | User Manual - Page 51
    and hold REDIAL/PAUSE to insert a dialing pause (a p appears). 5. Press MENU/SELECT. 6. Press or to select one of the following types: • Home • Cell • Work • Other 7. Press MENU/SELECT. The handset displays ENTER NAME. Use the dialing keys (page 53) to enter a name. • Press MUTE/REMOVE to erase
  • Vtech DS6321-2 | User Manual - Page 52
    Use the intercom feature for conversations between two system handsets. You can buy additional expansion handsets (DS6301) for this telephone system. You can register up to 12 handsets to the telephone base. To initiate an intercom call: 1. Press MENU/SELECT on the handset when it is not in use
  • Vtech DS6321-2 | User Manual - Page 53
    When you receive an incoming home call during an intercom call, there is an alert tone and Incoming call appears on screens. The telephone base and all other handsets ring. • Press /HOME/FLASH to answer the home call and the intercom call ends automatically. • Press OFF/CLEAR to end the intercom
  • Vtech DS6321-2 | User Manual - Page 54
    and the line key flashes. Use headset Intercom Directory Call log • If you have a two-handset system, your handset displays Calling other handset. The destination handset rings and displays Handset X is calling. INTERCOM TO: Handset 2 • If you have more than two handsets, your handset Handset
  • Vtech DS6321-2 | User Manual - Page 55
    phone number and 15 characters for each name. • Directory entries are stored at the telephone base and shared by all system handsets. Any changes made on one handset apply to all. • Only one handset can review the directory at a time. If another handset saved. All of the instructions on pages 53-56
  • Vtech DS6321-2 | User Manual - Page 56
    2. Press MENU/SELECT to copy the displayed number. 6. Press MENU/SELECT. 7. Press or to select one of the following types: • Home • Cell • Work • Other 8. Press MENU/SELECT. The screen your DS6321/6322 handsets. Entries must be downloaded from your cell phone (see Download directory on page 24). 52
  • Vtech DS6321-2 | User Manual - Page 57
    Telephone operation Character chart Use the dialing keys and the chart below to enter a name (up to 15 characters). Each press of a particular key causes the
  • Vtech DS6321-2 | User Manual - Page 58
    Telephone operation Review the directory Entries are sorted alphabetically. To review the directory: 1. Press / when the handset is not in use. 2. Press or to choose a directory, then press MENU/SELECT. (If you only have one page 53). You can enter up to three letters for the search. If there is no
  • Vtech DS6321-2 | User Manual - Page 59
    directory will be erased and replaced with the current cell phone directory. If you have edited the downloaded entries on the DS6321/6322, those changes will be lost. 1. Search for the desired entry in the directory (see Review the directory or 3-character alphabetical search on page 54). 2. When
  • Vtech DS6321-2 | User Manual - Page 60
    entry: 1. Search for the desired entry in the directory (see Review the directory or 3-character alphabetical search on page 54). 2. When the desired entry appears, enter the corresponding shortcut keys shown in the below table. Type: Home Cell Work Other Press: 1 2 3 4 Delete a directory entry
  • Vtech DS6321-2 | User Manual - Page 61
    This product supports caller ID services provided by most telephone service providers. Depending on your service subscription, you may see the caller's number, or the caller's name and number from the telephone service provider after the first or second ring. Caller ID from the home line allows you
  • Vtech DS6321-2 | User Manual - Page 62
    to caller ID service provided by your telephone service provider and/or cell phone service provider, information about one handset can review the call log at a time. If a handset tries to enter the call log while another handset is already in it, Not available at this time appears. If the phone
  • Vtech DS6321-2 | User Manual - Page 63
    but your directory number does not, the name will appear as delivered by the telephone service provider. Review the call log 1. Press CID/ when the handset is not in use. 2. Press or to browse. - OR 1. Press MENU/SELECT on the handset when it is not in use. 2. Press or to highlight Call log, then
  • Vtech DS6321-2 | User Manual - Page 64
    add or remove 1 in 595-9511 1-595-9511 front of the telephone number before dialing or saving it in the directory. 800-595-9511 1-800-595-9511 Dial a call log entry 1. Search for the desired entry in the call log (see Review the call log on page 59). 2. When the desired entry
  • Vtech DS6321-2 | User Manual - Page 65
    Telephone operation Save a call log entry to the directory Call log entries can only be saved to the Home directory. 1. Select a desired entry in the call log (see Review pause (a p appears). 5. Press MENU/SELECT. 6. Press or to select one of the following types: • Home • Cell • Work • Other 7. Press
  • Vtech DS6321-2 | User Manual - Page 66
    Review the call log on page 59). 2. When the desired entry appears, press MUTE/REMOVE. The screen shows the previous call log entry. To delete all entries: 1. Press MENU/SELECT on the handset is blocking the name. The caller is blocking the telephone number. The caller is blocking the name and number
  • Vtech DS6321-2 | User Manual - Page 67
    your telephone service provider. If you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message by following the instructions below. Set your answering system to answer calls at least two rings earlier
  • Vtech DS6321-2 | User Manual - Page 68
    beeps every 10 seconds when there are messages that have not been reviewed. Call intercept When a caller is leaving a message on your answering system, you can stop recording and talk to the caller by pressing /HOME/FLASH or on the handset. Telephone base ringer volume Press /VOL+ or /VOL- on the
  • Vtech DS6321-2 | User Manual - Page 69
    Answering system operation Message playback If you have new messages, the telephone plays only the new messages (oldest first). If there are no new messages, the telephone plays back all messages (oldest first). You have: 3 Old messages When playback begins, the handset screen displays PLAYING
  • Vtech DS6321-2 | User Manual - Page 70
    5. Press 5 when you finish recording. The handset announces, "Recorded" and then returns to the previous menu. • The system announces "Memory is full," if you record a memo when the memory is full. • Each memo can be up to four minutes in length. • Memos shorter than one second are not recorded. 66
  • Vtech DS6321-2 | User Manual - Page 71
    . Current message number during new message playback. Current message number during old message playback. Telephone base speaker volume level while adjusting. The system is answering a call, or recording a memo or announcement. Telephone is answering a call or being accessed remotely. The answering
  • Vtech DS6321-2 | User Manual - Page 72
    See Remote access code on page 38 to change it. 1. Dial your telephone number from any touch-tone telephone. 2. When the system plays your announcement, enter the two-digit security code. 3. You can also enter one of the following remote commands. Command 1 2 3 33 4 5 *5 6 *7 8 0 Function Play all
  • Vtech DS6321-2 | User Manual - Page 73
    Home line in use A system handset or another telephone on the same home line is in use. Incoming call There is an incoming call. Intercom The handset is on an intercom call. Intercom ended You have just ended an intercom call. List full The directory is full. Low battery The battery needs
  • Vtech DS6321-2 | User Manual - Page 74
    ** Paging ** One handset is already viewing the call log or directory and another handset attempts to review it. The handset has lost communication with the telephone base. There is no power connected to the telephone base. The system handset is being paged. Place in charger The battery is very
  • Vtech DS6321-2 | User Manual - Page 75
    Unable to call try again Unable to save XX Missed calls The answering system has no recording time left. The ringer is muted temporarily during an incoming Your selection has been saved. You tried to make an intercom call, but the handset you are calling is in the directory, in the call log, out of
  • Vtech DS6321-2 | User Manual - Page 76
    . DEVICE1/DEVICE2 IN USE On when a Bluetooth device is connected to the base. Flash while pairing a Bluetooth device. On when the telephone line is in use or on hold. On when the answering system is answering a call. On when you are registering a handset. Flashes quickly when there is an incoming
  • Vtech DS6321-2 | User Manual - Page 77
    off. Flashes when only one or two of the ringers are turned off. New voicemail - indicates you have new voicemail message(s) from the telephone service provider for the home line. New answering system message - indicates you have a new answering system message(s). Battery status - animates when the
  • Vtech DS6321-2 | User Manual - Page 78
    (ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. • Observe proper polarity orientation between the battery and metallic contacts. • To prevent fire or shock hazard, do not expose this product to water
  • Vtech DS6321-2 | User Manual - Page 79
    can add new handsets (DS6301, purchased separately) to your telephone system, but each handset must be registered with the telephone base before use. When first purchased, each expansion handset shows Press and hold FIND HANDSET on base for 4 sec, then press # on handset after a battery is installed
  • Vtech DS6321-2 | User Manual - Page 80
    , read all of the instructions on this page before you begin. To deregister all handsets: 1. Press and hold /FIND HANDSET on the telephone base for about 10 seconds until the IN USE light flashes, then release FIND HANDSET. 2. Press /FIND HANDSET again. You must press /FIND HANDSET while the IN USE
  • Vtech DS6321-2 | User Manual - Page 81
    . • Remove VTech DS6321/VTech DS6322 from your cell phone's handsfree device history list (see the user's manual of your cell phone for more information). • Carefully follow the pairing instructions on page 14 and make sure that your cell phone is not connected to any other Bluetooth device. • Turn
  • Vtech DS6321-2 | User Manual - Page 82
    sure that the telephone base is in discoverable mode. Carefully follow the setup instructions on page 14. • Make sure that you manually set your cell phone to search for devices. • Remove VTech DS6321/VTech DS6322 from your cell phone's handsfree device history list (see the user's manual of your
  • Vtech DS6321-2 | User Manual - Page 83
    any other Bluetooth device. • DS6321/6322 can only use one Bluetooth device at a time. The PIN on the telephone base does not work. • The default PIN is 0000. • If you have changed the PIN, it will appear on the handset in the pairing process. I cannot hear any audio on my telephone system when on
  • Vtech DS6321-2 | User Manual - Page 84
    line cord is plugged firmly into the telephone base and the telephone wall jack. • Unplug the electrical power to the telephone base. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to synchronize. • Charge the battery
  • Vtech DS6321-2 | User Manual - Page 85
    service provider (charges may apply). • The telephone line cord may be malfunctioning. Install a new telephone line cord. • Remove and install the battery again and then place the handset in the telephone base or charger. • Wait for the handset to synchronize with the telephone base. Allow up to one
  • Vtech DS6321-2 | User Manual - Page 86
    plug it back in again. Allow up to one minute for the cordless handset and the telephone base to synchronize. • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of
  • Vtech DS6321-2 | User Manual - Page 87
    noise on the cordless handset and the keys do not work. • Make sure the telephone line cord is plugged in securely. Registration failed appears on the handset. • Only one handset can be registered at a time. If you have multiple handsets to register, please follow the instructions on page 75 for
  • Vtech DS6321-2 | User Manual - Page 88
    and reinstall the battery. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize. • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away
  • Vtech DS6321-2 | User Manual - Page 89
    , contact your telephone service provider. • If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems. The outgoing announcement
  • Vtech DS6321-2 | User Manual - Page 90
    . • Disconnect the battery on the cordless handset. • Wait a few minutes before connecting power to the telephone base. • Install the battery again and place the cordless handset in the telephone base. • Wait for the cordless handset to synchronize with the telephone base. Allow up to one minute for
  • Vtech DS6321-2 | User Manual - Page 91
    10. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause
  • Vtech DS6321-2 | User Manual - Page 92
    /FLASH to answer the call. If the handset moves out of range during a telephone conversation, there might be interference. To improve reception, move closer to the telephone base. Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must
  • Vtech DS6321-2 | User Manual - Page 93
    their useful lives, when taken out of service within the United States and Canada. The RBRC® program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal waste, which may be illegal in your area. VTech's participation in RBRC® makes it easy for
  • Vtech DS6321-2 | User Manual - Page 94
    or modification by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non
  • Vtech DS6321-2 | User Manual - Page 95
    Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377. NOTE: Before calling for service, please review the user's manual - a check of the Product's controls and features may save you a service of VTech's responsibilities regarding the Product. There are no other express warranties. No one is
  • Vtech DS6321-2 | User Manual - Page 96
    off and on, the user is encouraged to try to correct the interference by one or more of the line and an RJ14 jack for two lines. See Installation Instructions in the user's manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line
  • Vtech DS6321-2 | User Manual - Page 97
    , or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations
  • Vtech DS6321-2 | User Manual - Page 98
    Charger: 2.02 X 3.03 X 3.77 in (51.4 X 76.9 X 95.7 mm) Handset: 4.44oz (126g) (including battery) Telephone base: 8.15oz (231g) Charger: 2.43oz (69g) Handset: 2.4V 500mAh Ni-MH battery Telephone base: 6V DC @ 400mA Charger: 6V AC @300mA Handset directory: 200 memory locations; up to 30 digits and 15
  • Vtech DS6321-2 | User Manual - Page 99
    system setup 37 Answer ON/OFF 34 Appendix 69 B Battery 4, 5, 74 Bluetooth glossary 13 Bluetooth headset 39 Bluetooth operation 12 Bluetooth setup 14 C Caller ID 57 Caller ID history 58 Call intercept 64 Call log 58 Call log display screen messages 62 Call screening 37 Call waiting on the cell line
  • Vtech DS6321-2 | User Manual - Page 100
    39 Telephone settings 27 Temporary tone dialing 43 Time 31 Toll saver 37 Troubleshooting 77 Turn on or off the answering system 34 U Using a Bluetooth headset 39 Using the home and cell lines together 42 V View the directory download information 26 Voicemail 30, 63 Voicemail for cell phone 41
  • Vtech DS6321-2 | User Manual - Page 101
    of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon 97008 Distributed in Canada by VTech Technologies Canada
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
User’s manual
www.vtechphones.com
Models:
DS6321-2/DS6321-3/
DS6321-4/DS6322-3/
DS6322-4