Vtech Three Handset Expandable Cordless Phone System with BLUETOOTH® Wireles
Vtech Three Handset Expandable Cordless Phone System with BLUETOOTH® Wireless Technology Manual
 |
View all Vtech Three Handset Expandable Cordless Phone System with BLUETOOTH® Wireless Technology manuals
Add to My Manuals
Save this manual to your list of manuals |
Vtech Three Handset Expandable Cordless Phone System with BLUETOOTH® Wireless Technology manual content summary:
- Vtech Three Handset Expandable Cordless Phone System with BLUETOOTH® Wireles - Page 1
cell phone. 9. When successfully connected, the handset displays Cellular setup completed Device connected and the corresponding status icon ( 1 or 2). The corresponding device light on the telephone base (DEVICE1 or DEVICE2) turns on. Ans. system Directory Call log Intercom Bluetooth BLUETOOTH - Vtech Three Handset Expandable Cordless Phone System with BLUETOOTH® Wireles - Page 2
land line ( /HOME/FLASH). The cell line is the telephone line associated with your cell phone service ( /CELL). You can: • Pair up to four Bluetooth enabled cell phones with the telephone base. Up to two of them can make and receive cell calls. However, only one cell phone can be on a call at a time
-
1 -
2
 |
 |
Quick start guide
for models DS6321-2/DS6321-3/
DS6321-4/DS6322-3/DS6322-4
Install the telephone base
Install the telephone base and charger(s) as
shown below.
Battery installation and charging
Install the battery as shown below. For optimal
performance, charge the handset battery for at
least 16 hours before use.
Pair your first Bluetooth cell phone
To pair and connect your first Bluetooth cell phone:
Press
MENU/
SELECT
on the
handset.
Press
or
to highlight
Bluetooth
, then press
MENU
/SELECT
.
Press
or
to highlight
Add cellular
, then press
MENU
/SELECT
. The screen
displays
ADD CELLULAR
Place cell phone next to
base. Press SELECT
.
Press
MENU
/SELECT
.
The screen displays
Please set your cell phone
to search for devices, then
press SELECT
.
Turn on the Bluetooth feature of
your cell phone and search for
or add new devices.
Press
MENU
/SELECT
to set the
telephone base to discoverable
mode.
Once your cell phone finds your
VTech DS6321/VTech DS6322
,
press
MENU
/SELECT
.
Enter the PIN of the telephone
base (the default PIN is
0000
)
into your cell phone.
When successfully connected,
the handset displays
Cellular setup completed
Device connected
and the
corresponding status icon
(
1
or
2
).
The
corresponding device light on
the telephone base (
DEVICE1
or
DEVICE2
) turns on.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Pair your first Bluetooth headset
To pair and connect your first Bluetooth headset:
A paired Bluetooth headset can be
used for making and receiving
home calls.
If the battery
compartment cover
is on the handset,
press the indentation
and slide the cover to
remove.
1.
Plug the battery
connector securely
into the socket
inside the handset
battery compartment,
matching the color-
coded label.
2.
Place the battery with
the label
THIS SIDE
UP
facing up and the
wires inside the battery
compartment.
3.
Align the cover flat
against the battery
compartment, then
slide it towards the
center of the handset
until it clicks into place.
4.
Charge the handset
by placing it in the
telephone base or
charger. The
CHARGE
light is on when the
handset charges.
5.
CHARGE
light
Press
MENU/
SELECT
on the
handset.
Press
or
to highlight
Bluetooth
, then press
MENU
/SELECT
.
Press
or
to highlight
Add headset
, then press
MENU
/SELECT
. The screen
displays
ADD HEADSET Place
Bluetooth headset next to
base. Press SELECT
.
Press
MENU
/SELECT
.
The screen displays
Please set your headset to
discoverable mode, then
press SELECT
.
Set your headset to
discoverable mode.
Press
MENU
/SELECT
to
set your telephone base to
discoverable mode and search
for your headset.
Once the telephone base
finds your headset, press
MENU
/SELECT
.
Enter the PIN of your headset
(the PIN for most Bluetooth
devices is
0000
), then press
MENU
/SELECT
.
When the handset displays
Headset A paired to base.
Connect now? Press
SELECT
, then press
MENU
/SELECT
.
When successfully connected,
the handset displays
Headset setup completed
Device connected
and the
corresponding status icon
(
1
or
2
).
The
corresponding light on the
telephone base (
DEVICE1
or
DEVICE2
) turns on.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Telephone line cord
DSL filter (not
included)
is required
if you have DSL high
speed Internet service
Telephone
base power
adapter
Electrical outlet not
controlled by a wall switch
Telephone wall jack
Telephone base
Power
adapter
Charger
Electrical outlet
not controlled by
a wall switch
Ans. system
Directory
Call log
Intercom
Bluetooth
ADD CELLULAR
Place cell
phone next to
base.
Press
SELECT
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
Base name:
VTech DS6321
PIN:0000
Please set your
cell phone to
search for
devices, then
press
SELECT
Cellular setup
completed
Device
connected
Use only the power adapters and batteries supplied
with your VTech telephone.
For complete feature instructions, please refer to your
user’s manual.
•
•
The pairing process may take up to one minute. If the
pairing process fails, try again.
If you put the handset back in the telephone base
or charger while pairing, the process stops and the
handset returns to idle mode.
•
•
The pairing process may take
up to one minute. If the pairing
process fails, try again.
If you put the handset back in the
telephone base or charger while
pairing, the process stops and the
handset returns to idle mode.
•
•
Ans. system
Directory
Call log
Intercom
Bluetooth
ADD HEADSET
Place Bluetooth
headset next to
base.
Press
SELECT
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
Please set your
headset to
discoverable
mode, then
press
SELECT
Searching for
Bluetooth
headsets...
ADD HEADSET
Enter PIN:
----
FOUND DEVICES
Headset A
Headset B
Headset A
paired to base.
Connect now?
Press
SELECT
Headset setup
completed
Device
connected