Vtech V.Smile Motion Wireless Controller Pink User Manual

Thank you for purchasing the

Active Learning System. Please

read the User’s Manual carefully before playing.

Connecting to the Console - One-Player Mode

• Locate the

PLAYER 1/OFF/PLAYER 2

Switch on the bottom of the controller.

Move the switch to

PLAYER 1

. (Figure 3)

Note

: When only one wireless joystick is connected, please set the controller to

PLAYER 1

.

• Make sure the controller’s Motion Sensor Signal is directly facing the

console . (Figure 4)

• When the direction lights and the light on the

console stop

blinking, the connection is complete. (Figure 5)

• Move the

PLAYER 1/OFF/PLAYER 2

Switch to

OFF

when controller is not in

use. (Figure 6)

Connecting to the Console - Two-Player Mode

• Locate the

PLAYER 1/OFF/PLAYER 2

Switch on the bottom of the controller.

Move the switch to

PLAYER 2

. (Figure 7)

• Repeat the steps above to be sure the controller is connected for

PLAYER 2

.

If you have a problem that cannot be solved by using this manual, we encourage

you to visit us online or contact our Consumer Services Department with any

problems and/or suggestions that you might have. A support representative will

be happy to assist you.

(Figure 7)

91-002299-001-000 (US)

Using the

Wireless Controller

( This is an update to page 8 of the User’s Manual )

(Figure 3)

(Figure 6)

(Figure 4)

(Figure 5)