Vtech vt9162 User Manual - Page 21
Answering System Setup
View all Vtech vt9162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ANSWERING SYSTEM SETUP NOTE: In Announce Only mode, your outgoing announcement is repeated before hanging up. Recording / Playing / Deleting the Outgoing Messages (OGM) 1. Press MENU until the desired item (Set Outgoing Message) is announced. 2. Press REC/MEMO ,"Now recording", is announced, followed by a beep. Speak towards the front of the Answering System (max. length: 90 seconds). 3. Press any MAILBOX key to stop the recording. 4. Your outgoing message is played for you, followed by a beep. 5. To review a recorded announcement, press MENU key until "Set Outgoing Message" is announced. Press any MAILBOX key. The current greeting is played. 6. To delete a recorded announcement, press DELETE during OGM playback. You then hear "Outgoing Message has been erased". NOTE: If your recording time is less than 2 seconds, your OGM will not be recorded, and the default greeting will be used. Set Security Code The security code programmed into the Answering System is used to gain access to functions from remote locations. The security code default setting is 50. You can select any two-digit code, from 40 to 99. 1. Press MENU unitl you hear "Set security code." 2. Press TIME/SET to hear the current security code. 3. Press SELECT briefly to increase the security code by 1. Or, hold SELECT continuously to increase the code by multiples of 10. 4. Press TIME/SET to confirm your choice and you will hear the announcement of the security code. 21 Itad Operation