Weber Summit Gold A Owner Manual - Page 47
Crossover, Ignition System Operations, Replace Igniter Batteries
View all Weber Summit Gold A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Maintenance Crossover® Ignition System Operations If the Crossover® ignition system fails to ignite the LEFT burner in a burner set, light the LEFT burner with a match. If the LEFT burner lights with a match, then check the Crossover® ignition system. • Check that both ignition wires(1,2) are attached properly. • Check that the Crossover® ignition button is activating. • Replace battery with a like brand battery. • You should hear the igniter sparking. If the Crossover® ignition system still fails to light, contact the Customer Service Representative in your region using the contact information sheet provided with your manual. (1) (2) Replace Igniter Batteries Parts required: 1 AA alkaline battery per igniter. Unscrew igniter button from top of control panel. Remove igniter button and contact spring. Remove old battery and replace with a new AA alkaline battery. Positive end(1) of battery faces up as shown in illustration. Replace spring contact(2) and screw igniter button(3) back down. E-5