Weider 130 Weight Bench User Manual
Weider 130 Weight Bench Manual
 |
View all Weider 130 Weight Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Weider 130 Weight Bench manual content summary:
- Weider 130 Weight Bench | User Manual - Page 1
give the following information: • the MODEL NUMBER of the product (WEEVBE7035.0) • the NAME of the product (WEIDER PRO 130 weight bench) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING - Weider 130 Weight Bench | User Manual - Page 2
The decal shown here has been placed on the weight bench in the indicated location. If the decal is missing or illegible, call our Customer Service Department tollfree and order a free replacement decal (see the back cover of this manual). Apply the replacement decal in the location shown. Rest - Weider 130 Weight Bench | User Manual - Page 3
use the weight bench. 5. The weight bench is intended for home use only. Do not use the weight bench in any commercial, rental or institutional setting. 11. Always make sure that the pins are fully inserted and in the proper position for the exercise you are performing. 12. When the seat is tilted - Weider 130 Weight Bench | User Manual - Page 4
calling. The model number is WEEVBE7035.0. The serial number can be found on a decal attached to the weight bench (see the front cover of this manual). Before reading further, please review the drawing below and familiarise yourself with the parts that are labelled. Seat Seat Frame Adjustment Leg - Weider 130 Weight Bench | User Manual - Page 5
Everything in this manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires - Weider 130 Weight Bench | User Manual - Page 6
Bolt (29) and an M8 Nylon Locknut (35). 9. Attach the Seat (9) to the Seat Frame (5) with 9 four M6 x 16mm Screws (15). 18 4 1 27 17 16 33 25 36 26 25 36 26 35 28 27 1 29 9 5 10. Attach the Seat Frame (5) to the Bench Frame (1) with an M10 x 122mm Bolt (20) and an M10 - Weider 130 Weight Bench | User Manual - Page 7
in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. M4 x 12mm Screw (33 - Weider 130 Weight Bench | User Manual - Page 8
M6 Washer # 1 Exercise Guide # 1 User's Manual # 1 Grease Packet Note: "#" indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the user's manual for information about ordering replacement parts. EXPLODED DRAWING-Model No. WEEVBE7035
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Part No. 225730 R0705B
Printed in China © 2005 ICON IP, Inc.
If you encounter any difficulties with this product, or if you need to order replacement parts, call the ICON Health
& Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
When ordering parts, please be prepared to give the following information:
•
the MODEL NUMBER of the product (WEEVBE7035.0)
•
the NAME of the product (WEIDER PRO 130 weight bench)
•
the SERIAL NUMBER of the product (see the front cover of this manual)
•
the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING in the
center of this manual)
08457 089 009
ORDERING REPLACEMENT PARTS
www.iconeurope.com
Visit our website at
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model No. WEEVBE7035.0
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (Under Seat)
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing or damaged parts,
please call:
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: [email protected]
08457 089 009