Home » Weider Manuals » Exercise and Fitness » Weider 9025 » Manual Viewer

Weider 9025 Uk Manual

Weider 9025 Manual

Get Weider 9025 PDF manuals and user guides

View all Weider 9025 manuals

Add to My Manuals
Save this manual to your list of manuals

Weider 9025 manual content summary:

Weider 9025 | Uk Manual - Page 1
& Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK email: [email protected] CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Visit our website at www.iconeurope.com
Weider 9025 | Uk Manual - Page 2
16 WEIGHT RESISTANCE CHART 18 TROUBLESHOOTING 19 CABLE manual. Remove them before beginning assembly. WARNING DECAL PLACEMENT The decals shown here have been placed on the weight system in the locations shown on page 4. If a decal is missing or illegible, please call our Customer Service
Weider 9025 | Uk Manual - Page 3
. 1. Read all instructions in this manual and in the accompanying literature before using the weight system. 2. It is the responsibility of the owner to ensure that all users of the weight system are adequately informed of all precautions. 3. The weight system is intended for home use only. Do
Weider 9025 | Uk Manual - Page 4
WEIDER® 9025 weight system. The weight system offers a selection of weight manual carefully before using the weight system. If you have questions after reading this manual, please call our Customer Service weight system (see the front cover of this manual). Before reading further, please review the
Weider 9025 | Uk Manual - Page 5
manual is designed to ensure that the weight system can be assembled successfully by anyone. However, it is important to realise that the versatile weight system all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight system, make sure all parts are oriented as
Weider 9025 | Uk Manual - Page 6
the Stabiliser with the indicated M8 x 67mm Carriage Bolts (82) and two M8 Nylon Locknuts (73). Do not tighten the Locknuts yet. 31 Attach the Support Bracket (33) to the M10 x 67mm Carriage Bolt (107) with an M10 Star Washer (92) and an M10 Nylon Locknut (72). Do not tighten the
Weider 9025 | Uk Manual - Page 7
Uprights (4, 3) with four M10 x 68mm Bolts (87), four M10 Washers (71), and four M10 nylon Locknuts (72). Do not tighten the Locknuts yet. Attach the Weight Guides (5) to the Top Frame (6) with an M10 x 153mm Bolt (91), two M10 Washers (71), two 18mm Spacers (109), and an M10 Nylon Locknut (72). Do
Weider 9025 | Uk Manual - Page 8
6. Press two 38mm Square Bushings (35) into the Right Pedal (14); Attach a Pedal Cover (36) to the Pedal with two M4 x 16mm Self-tapping Screws (74) and two M4 Washers (75). Lubricate the pedal axles on the Rear Upright (3). Slide the Right Pedal (14) onto the pedal axle. Make sure that the Pedal is
Weider 9025 | Uk Manual - Page 9
9. Attach a Cable Pivot (58) to the Right Fly Arm (9) 9 with an M10 x 50mm Bolt (85) and an M10 Nylon Locknut (72). Do not overtighten the Locknut; the Lubricate 86 Cable Pivot must be able to pivot easily. Press a 40mm x 50mm Inner Cap (23) into the Right Fly Arm (9). 85 Lubricate 59 71
Weider 9025 | Uk Manual - Page 10
12. Slide a Grip (41) onto a VKR Handle (42). Attach 12 the VKR Handle to the Left VKR Arm (13) with an M10 x 55mm Bolt (80), two M10 Washers (71), a 7mm Spacer (43), and an M10 Nylon Locknut (72). Press a 25mm Round Inner Cap (105) into the bottom of the VKR Handle (42). Repeat this step
Weider 9025 | Uk Manual - Page 11
17. Attach the Butterfly Cable (55) to the indicated 17 Cable Pivot (58) with an M8 x 20mm Shoulder Bolt (93) and an M8 Nylon Locknut (73). 93 58 18. Locate the Short Cable (94). Attach the Cable to 18 the Front Upright (4) with an M10 x 72mm Bolt (89), an M10 Washer (71), and an M10 Nylon
Weider 9025 | Uk Manual - Page 12
end of the Cable 57 so that two threads show past the Locknut (see the inset drawing). 96 Attach the Small "U"-bracket (52) to the Weight Tube (18) with an M8 x 45mm Bolt (96) and an M8 Nylon Locknut (73). Do not overtighten the Locknut; the
Weider 9025 | Uk Manual - Page 13
26. Locate the Low Cable (56). Route the Cable through the Front Upright (4) and under a 90mm Pulley (46). Attach the Pulley and two Pulley Covers (49) inside the Upright with an M10 x 68mm Bolt (87), two M10 Washers (71), two 10mm Spacers (45), and an M10 Nylon Locknut (72). Make sure the large
Weider 9025 | Uk Manual - Page 14
Seat Assembly 31. Attach a VKR Arm Pad (64) to the Left VKR Arm (13) with two M6 x 53mm Screws (70) and two M6 Washers (69). Repeat this step with the Right VKR Arm (12). 31 69 12 70 32. Attach a VKR Back Pad (63) to the Rear Upright 32 (3) with two M6 x 65mm Screws (77) and two M6 Washers (69
Weider 9025 | Uk Manual - Page 15
explained in ADJUSTMENT, beginning on the following page. Before using the weight system, pull each cable a few times to make sure that the cables and correct the problem before using the weight system. IMPORTANT: If the cables are not properly routed, they may be damaged when heavy weight is used.
Weider 9025 | Uk Manual - Page 16
ADJUSTMENT The instructions below describe how each part of the weight system can be adjusted. = 2,2 pounds. LOCKING THE WEIGHT STACK To prevent unauthorised use of the weight system, insert the Locking Bar (21) into the indicated hole in one of the Weight Guides (5). Secure the Locking Bar
Weider 9025 | Uk Manual - Page 17
Seat Frame. Lift the Seat Frame off the Front Upright (4). ATTACHING THE LEG LEVER To use the Leg Lever (8), first attach the seat to the weight system (see ATTACHING THE SEAT, above). Next attach the Low Cable (56) to the M10 x 63mm Eyebolt (97) with the Chain (99) and two Cable Clips
Weider 9025 | Uk Manual - Page 18
each butterfly arm. Note: The actual resistance at each station may vary due to differences in individual weight plates as well as friction between the cables, pulleys, and weight guides. WEIGHT Top 1 2 3 4 5 6 7 8 9 HIGH PULLEY PRESS ARM (lbs.) (lbs.) 13 25 31 44 47 67 64 81 77 101
Weider 9025 | Uk Manual - Page 19
TROUBLESHOOTING Make sure all parts are properly tightened each time the weight system is used. Replace any worn parts immediately. The weight system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used
Weider 9025 | Uk Manual - Page 20
the diagrams to make sure that the cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the weight system will not function properly and damage may occur. The numbers show the correct route for each cable. Make sure that the cable traps do not
Weider 9025 | Uk Manual - Page 21
completing more sets rather than by using high amounts of resistance. WEIGHT LOSS To lose weight, use a low amount of resistance and increase the number manner will leave you feeling exhausted. On the exercise guide accompanying this manual you will find photographs showing the correct form for
Weider 9025 | Uk Manual - Page 22
a toning work- out. • Rest for 30 seconds after each set for a weight loss workout. Plan to spend the first couple of weeks familiarising yourself with the keep a record of each workout. The chart on page 23 of this manual can be photocopied and used to schedule and record your workouts. List the
Weider 9025 | Uk Manual - Page 23
MONDAY Date: // EXERCISE WEIGHT SETS REPS TUESDAY Date: // AEROBIC EXERCISE WEDNESDAY Date: // EXERCISE WEIGHT SETS REPS THURSDAY Date: // AEROBIC EXERCISE FRIDAY Date: // EXERCISE WEIGHT SETS REPS Make photocopies of this page for scheduling and recording your workouts. 23
Weider 9025 | Uk Manual - Page 24
when ordering replacement parts: • the MODEL NUMBER of the product (WEEVSY20230) • the NAME of the product (WEIDER® 9025 weight system) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING in
Weider 9025 | Uk Manual - Page 25
REMOVE THIS PART LIST/EXPLODED DRAWING FROM THE MANUAL. SAVE THIS PART LIST/EXPLODED DRAWING FOR FUTURE REFERENCE Note: Specifications are subject to change without notice. See the back cover of the user's manual for information about ordering replacement parts. 81
Weider 9025 | Uk Manual - Page 26
Upright Weight Guide Top Weight Weight Tube Bumper Weight Tube Top Weight Weight Pin Locking Bar Lock 40mm x 50mm Inner Cap Arm Handle 25mm Dome Inner Cap Pad Tube 19mm Round Inner Cap Seat Plate 38mm Square Inner Cap 25mm Round Outer Cap 50mm Square Inner Cap Base Cap Support Manual Exercise Guide
Weider 9025 | Uk Manual - Page 27
EXPLODED DRAWING-Model No. WEEVSY20230 R1103A 72 71 85 59 93 100 58 55 9 73 55 59 72 72 23 86 100 103 86 73 58 23 59 71 60 65 102 60 11 84 25 71 84 72 83 71 59 60 10 60 71 24 72 54 46 72 87 71 87 74 54 54 31 46 71 71 6 5 93 72 71 31 85 87 71 71 87 72 50
Weider 9025 | Uk Manual - Page 28
assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it
Weider 9025 | Uk Manual - Page 29
19mm Round Inner Cap (27) 38mm Square Inner Cap (29) 25mm Dome Inner Cap (25) 40mm x 50mm Inner Cap (23) 50mm Square Inner Cap (31) 25mm Round Inner Cap (105) 25mm Round Outer Cap (30) 16mm Round Outer Cap (38) 50mm x 70mm Inner Cap (103) 16mm Retainer (39) 25mm Retainer (98)
Weider 9025 | Uk Manual - Page 30
PART IDENTIFICATION CHART M6 Nylon Locknut (90) M8 Nylon Locknut (73) M10 Nylon Locknut (72) M4 Washer (75) M6 Washer (69) M10 Washer (71) M4 x 16mm Self-tapping Screw (74) M6 x 16mm Screw (76) M8 x 20mm Button Head Bolt (84) M8 x 20mm Shoulder Bolt (93) M8 x 45mm Bolt (96) M10 x 50mm Bolt (85)
Weider 9025 | Uk Manual - Page 31
M10 x 60mm Bolt (95) M6 x 65mm Screw (77) M10 x 68mm Bolt (87) M10 x 65mm Carriage Bolt (81) M8 x 67mm Carriage Bolt (82) M10 x 67mm Carriage Bolt (107) M10 x 72mm Bolt (89) M10 x 80mm Bolt (83) M10 x 83mm Button Head Bolt (86) M10 x 153mm Bolt (91)