Weider Cobra 1000 English Manual
Weider Cobra 1000 Manual
View all Weider Cobra 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Weider Cobra 1000 manual content summary:
- Weider Cobra 1000 | English Manual - Page 1
guarantee you complete satisfaction through our Customer Service pupal meta. Please CALL: 0345-089009 Or WRITE: ICON Fitness Lifestyle Ltd. Greenwich House 223 North Street Sheepscar Leeds LS7 2AA CAUTION Read all precautions and instructions in this manual before using this equipment. Save this - Weider Cobra 1000 | English Manual - Page 2
: To reduce the risk of serious injury, read the following important precautions before using the home gym system. 1. Read all instructions in this manual and in the accompanying literature before using the home gym system_ 2. It is the responsibility of the owner to ensure that all users of the - Weider Cobra 1000 | English Manual - Page 3
the versatile WEIDER. COBRA 1000 HOME GYM SYSTEM. The COBRA 1000 offers a system, the COBRA 1000 will help you to achieve the specific results you want. For your benefit, read this manual carefully before using the COBRA 1000. If you have additional ques- tions, please call our Customer Service - Weider Cobra 1000 | English Manual - Page 4
instructions: • Place all parts of the COBRA 1000 in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. • For help identifying the small parts used in assembly, use the PART IDENTIFICATION CHART located in the centre of this manual - Weider Cobra 1000 | English Manual - Page 5
in the top Weight. Slide the remaining Weight (51) onto the Weight Guides (38) and the Weight Tube (54). Be sure that the Weight is turned so that the pin groove is facing the Top Frame (42). 4. Attach the Weight Tube Guide (55) and the indicated end of the Long Cable (18) to the Weight Tube (54) - Weider Cobra 1000 | English Manual - Page 6
(38) with two 1/4" x 1 1/2" Bolts (61) and two 1/4" Nylon Locknuts (60). Attach the Medium Cable (68) and the Weight Guide Top (53) to the Top Frame (42) with a 5/16" x 3 3/4" Bolt (62), a 5/16" Washer (20), and a 5/16" Nylon Locknut (1). 6. Wrap the Medium Cable (68) around a 3 1/2" 6 Pulley - Weider Cobra 1000 | English Manual - Page 7
9. Wrap the Long Cable (18) around the 4 1/2" Pulley 9 (15). Attach the Pulley to the Pulley Brackets (9) with a 3/8" x 1 3/4" Bolt (22) and a 3/8" Nylon Locknut (2). 9 22 I 18 . 9 2 o . t 15 10. Wrap the Long Cable (18) around a 3 1/2" Pulley (4). Attach the Pulley and the Cable Trap (16) to - Weider Cobra 1000 | English Manual - Page 8
13. Press a 2" Square Inner Cap (36) into the front of the Leg Lever (37). Attach both Leg Lever Brackets (30) to the Leg Lever with two 5/16" x 2 3/4" Bolts (29), four 5/16" Washers (20), and two 5/16" Nylon Locknuts (1). Attach the Leg Lever Bumper (65) to the Leg Lever (37) with the #8 x 3/4" - Weider Cobra 1000 | English Manual - Page 9
will be explained in ADJUSTMENT, beginning on page 10 of this manual. 19. The decals shown below have been placed on your home gym system. If one of the decals Is missing, or If it is not legible, please call our Customer Service Department to order a free replacement decal (see ORDERING REPLACEMENT - Weider Cobra 1000 | English Manual - Page 10
ADJUSTMENT The instructions below describe how each part of the home gym system can be adjusted. IMPORTANT: When attaching the let bar or nylon strap, make sure that the attachments are in the correct starting position for the - Weider Cobra 1000 | English Manual - Page 11
on page 10). 8 L Lift the Press Arm Lever (8) until it is above the indi- cated holes in the Weight Guides (38). Insert the Long "L"-Pin (58) through the holes in the Weight Guides. Rest the Press Arm Lever on the Long "L"- in. 58 O 38 USING THE LOW PULLEY STATION \ Tr• perform low - Weider Cobra 1000 | English Manual - Page 12
STORAGE First, lock the Press Arm Lever (8) in place at the top of the Weight Guides (see LOCKING THE PRESS ARM LEVER on page 11). Lift the Backrest (27) up and lean it against the Weight Guides (38). Wrap the Short Cable (71) around the Backrest Frame (28) and one of the - Weider Cobra 1000 | English Manual - Page 13
TROUBLE-SHOOTING AND MAINTENANCE Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. , see ORDERING REPLACEMENT PARTS on the back cover of this manual. 13 - Weider Cobra 1000 | English Manual - Page 14
Guide Weight Bumper Weight Guide Sleeve Long "L"-Pin Weight Tube Endcap 1/4" Nylon Locknut 1/4" x 1 1/2" Bolt 5/16" x 33/4" Bolt Weight Pin 1/4" Fender Washer Leg Lever Bumper #8 x 3/4" Self-tapping Screw Short Lock Pin Medium Cable 5/16" x 3" Bolt Ankle Strap Short Cable Cable Clip User's Manual - Weider Cobra 1000 | English Manual - Page 15
EXPLODED DRAWING Model No. WESY50200 j 36 6 ( 1t 24 R0896A 13 68 Cb-72 12 4 d1 20 42 '6( 53 • 68 •, 62 6 8 1 55 61 14 8 4 69 71 2 9 23-°"' 22 9 10 15 7 27 70 c\ 6 21 20 41 54 39 38 - Weider Cobra 1000 | English Manual - Page 16
to give the following information: • The MODEL of the product (WESY50200). • The NAME of the product (WEIDER® COBRA 1000 HOME GYM SYSTEM). • The SERIAL NUMBER of the product (see the front cover of this manual). • The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 14 of this - Weider Cobra 1000 | English Manual - Page 17
REMOVE THIS PART IDENTIFICATION CHART FROM THE MANUAL This chart is provided to help you identify the small parts used in assembly. Important: Some parts may have been pre-assembled for shipping purposes. - Weider Cobra 1000 | English Manual - Page 18
1/4" Nylon Locknut (60)-4 5/16° Nylon Locknut (1)-14 0 3/8" Nylon Locknut (2)-4 5/16" Nylon Jam Nut (5)-7 1" Washer (43)-2 1/4" Fender Washer (64)-2 4(\\\\\\\\AAV #8 x 3/4" Self-tapping Screw (66)-1 3/8" Washer (3)-2 \ 0 U 5/16" Washer (20)-16 1/4" x 1/2" Screw (25)-4 V 1/4" x 1 1/2" Bolt (61 - Weider Cobra 1000 | English Manual - Page 19
\\\\\\\\\\ 5/16" x 2 3/4" Bolt (29)-6 5/16" x 3" Bolt (69)-2 5/16" x 3 3/4" Bolt (62)-1 \\\\\\ 3/8" x 4" Bolt (17)-1 0 3/4" Spacer (19)-1 0 17/32" Long Spacer (13)-2 3/4" Round Inner Cap (35)-6 Leg Bumper (65)-1 1 1/2" Square Bushing (10)-1 Weight Pin (63)-1 - Weider Cobra 1000 | English Manual - Page 20
1 1/2" Square Inner Cap (50)-2 / ( 2" Square Outer Cap (44)-2 2" Square Inner Cap (36)-6
Model
No.
WESY50200
Serial
No.
O
0
0
0
Serial
Number
Decal
QUESTIONS?
As
a
manufacturer,
we
are
com-
mitted
to
providing
complete
customer
satisfaction.
If
you
have
questions,
or
find
that
there
are
missing
or
damaged
parts,
we
will
guarantee
you
complete
satisfaction
through
our
Customer
Service
pupal
meta.
Please
CALL:
0345-089009
Or
WRITE:
ICON
Fitness
Lifestyle
Ltd.
Greenwich
House
223
North
Street
Sheepscar
Leeds
LS7
2AA
al
CAUTION
Read
all
precautions
and
instruc-
tions
in
this
manual
before
using
this
equipment.
Save
this
manu-
al
for
future
reference.
C
a
o'
o'
0'
USER'S
MANUAL
/./z_
io
7