Weider Pro 5500 User Manual - Page 11

7. Attach a Shroud Cover (23) to the Left and Right Shrouds (21, 22) with two M6 x 28mm Bolts (94), four M6 Washers (114), and two M6 Nylon Locknuts (107). Attach the Shroud Cover (23) to the Top Frame (4) with four M4 x 16mm Self-tapping Screws (110) and four M4 Washers (104). See the inset drawing and attach the other Shroud Cover (23) in the same manner. 7 94 114 23 114 107 114 114 94 22 104 4 110 110 104 21 8. Note: Some parts have been removed to show 8 this step clearly. Slide the two Weight Bumpers (71) onto the Weight Guides (18). Orient fourteen Weights (19) with the pin holes on the bottom as shown. Slide the Weights onto the Weight Guides. Insert the Weight Tube (20) into the fourteen Weights (19). Make sure the pin on the Weight Tube is oriented as shown. Lubricate the indicated holes in a Weight (19) with the included grease packet. Slide the Weight onto the Weight Guides (18). Attach the Weight Guides (18) to the Top Frame (4) with an M10 x 155mm Bolt (96), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77). 23 96 80 4 18 19 Pin Hole 109 80 77 Grease Pin 20 19 71 11