Weider Pro 5500 User Manual - Page 13
Tighten the Nylon Locknuts 77, 78, 107 used
View all Weider Pro 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
12. Apply grease to the locations shown and attach the Left Butterfly Bracket (28) to the Butterfly 12 Frame (5) with an M10 x 80mm Bolt (84) and an M10 Nylon Locknut (77). 84 Repeat this step for the Right Butterfly Bracket (29). Grease Tighten the Nylon Locknuts (77, 78, 107) used in steps 2-12. 29 5 77 28 13. Attach a Butterfly Handle (27) to the Left Butterfly 13 Arm (25) with an M10 x 65mm Button Bolt (106), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77). Secure the Left Butterfly Arm (25) with an M10 x 82mm Button Screw (92) and an M10 Large Washer (105). Repeat this step for the Right Butterfly Arm and Butterfly Handle (26, 27). 27 26 25 77 80 109 80 106 109 27 14. Apply grease in the locations shown and attach 14 the Right Butterfly Arm (26) to the Right Butterfly Bracket (29) with an M10 x 75mm Bolt (82) and an M10 Nylon Locknut (77). Press a Bolt Cap (44) onto the end of the Bolt. Do not overtighten the Bolt; the Butterfly Arm must pivot freely. 26 Repeat this step for the Left Butterfly Arm (25). 105 92 Grease 77 82 44 29 25 13