Weider Pro 9930 User Manual - Page 16
Seat Assembly
View all Weider Pro 9930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Seat Assembly 33 33. Locate and open the parts bag labelled "SEAT ASSEMBLY." Insert a 1/4" x 2" Carriage Bolt (85) into the center hole in a Seat Plate (42). Attach the Seat Plate to a Seat (51) with two 1/4" x 3/4" Screws (13). Insert the 1/4" x 2" Carriage Bolt (85) into the indicated hole in the Press Seat Frame (52) and secure it with a 1/4" Flat Washer (11) and a 1/4" Nylon Locknut (16). Secure the other end of the Seat (51) with a 1/4" x 2" Bolt (86) and a 1/4" Flat Washer. 51 85 11 42 13 86 52 11 16 34. Press four 3/4" Round Inner Caps (40) into the ends of the Pad Tubes (48). 34 Insert the Pad Tubes (48) into the indicated holes in the Leg Lever (49) and the Press Seat Frame (52). Slide Foam Pads (47) onto the ends of both Pad Tubes. 52 48 40 47 49 40 47 35. Insert a 1/4" x 2 1/2" Carriage Bolt (12) into the center hole in a Seat Plate (42). Attach the Seat Plate to the 35 10 Press Backrest (89) with two 1/4" x 3/4" Screws (13). Insert the 1/4" x 2 1/2" Carriage Bolt (12) into the indi- cated hole in the Press Frame Upright (59) and 11 secure it with a 1/4" Flat Washer (11) and a 1/4" Nylon Locknut (16). 16 Secure the other end of the Press Backrest (89) with a 1/4" x 2 1/2" Screw (10) and a 1/4" Flat Washer (11). 11 89 59 13 42 12 16