Weider Pro 9930 User Manual - Page 7

3. Place two Weight Bumpers (84) over the indicated 3 holes in the Butterfly Base (61). Slide the Weight Guides (58) into the indicated holes. Attach the Weight Guides (58) to the Butterfly Base (61) with two 3/8" x 2 1/2" Bolts (6), four 3/8" Flat Washers (17), and two 3/8" Jam Nuts (18). Slide the eight Weights (8) onto the Weight Guides (58). Make sure that the Weights are turned so the pin grooves are on the bottoms of the Weights. Pin Grooves 84 18 17 58 8 18 17 61 4. Press a Weight Tube Bumper (76) into the lower end 4 of the Weight Tube (77). Slide the Weight Tube into the center hole in the Weights (8). Lubricate the holes in the Top Weight (78). Slide the Top Weight onto the Weight Guides (58). 17 6 Lubricate 78 58 77 76 8 5. Press two 2" Square Inner Caps (38) into the Butterfly Top Frame (64). Press two 1" Round Inner Caps (41) 5 into the top of the Butterfly Top Frame. Attach the Butterfly Top Frame (64) to the Press Top Frame (63) with two 5/16" x 2 3/4" Bolts (20), two 38 5/16" Flat Washers (19), and two 5/16" Nylon Locknuts (2). Press a 2" Square Inner Cap (38) into the Press Top Frame (63). 38 19 2 41 64 38 2 20 19 63 7