Weslo Cadence 1020 English Manual
Weslo Cadence 1020 Manual
 |
View all Weslo Cadence 1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Weslo Cadence 1020 manual content summary:
- Weslo Cadence 1020 | English Manual - Page 1
satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID .ÐFri., 6 a.m.Ð6 p.m. MST CAUTION Read all precautions and instructions in this manual before using this equipment. Save this - Weslo Cadence 1020 | English Manual - Page 2
7 HOW TO FOLD AND MOVE THE TREADMILL 10 MAINTENANCE AND TROUBLE-SHOOTING 12 CONDITIONING GUIDELINES 14 ORDERING REPLACEMENT PARTS Back Cover LIMITED WARRANTY Back Cover Note: A PART LIST and an EXPLODED DRAWING are attached in the center of this manual. Remove the PART LIST and EXPLODED - Weslo Cadence 1020 | English Manual - Page 3
tighten all parts of the treadmill every three months. 23. Never insert any object into any opening. 24. Always unplug the power cord before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service - Weslo Cadence 1020 | English Manual - Page 4
And when youÕre not exercising, the unique CADENCE 1020 can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill. If you have additional questions, please call our Customer Service Department toll-free at - Weslo Cadence 1020 | English Manual - Page 5
damaging the Wire Harness. With the help of a second person, carefully lay the treadmill onto one side. Insert one of the Base Legs (44) into the Upright the Latch Bracket 38 (16) and the Latch Spacer (13), attach both parts to the left Upright (38) with the four Latch Screws (8). Make sure that - Weslo Cadence 1020 | English Manual - Page 6
onto the right Upright (38). Press the Allen Wrench (81) into the Adhesive Clip. 11 12 7 Battery Cover Tab Batteries 38 8. Make sure that all parts are properly tightened before you use the treadmill. 81 80 6 - Weslo Cadence 1020 | English Manual - Page 7
equipment-grounding conductor and a Your treadmill features a walking belt coated with grounding plug. Plug the power cord into a surge PERFORMANT LUBETM treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your homeÕs power. - Weslo Cadence 1020 | English Manual - Page 8
CONSOLE Displays Incline Control Speed Control Key Pulse Sensor Clip CAUTION: Before operating the console, read the following precautions. ¥ Do not stand on the walking belt when turning on the power. ¥ Always wear the clip (see the drawing above) while operating the treadmill. When the key is - Weslo Cadence 1020 | English Manual - Page 9
incline of the treadmill as desired. To change the incline, press the top or bottom of the incline control until the desired incline power. To turn off the power, simply wait for about four minutes. If the walking belt Handrails, remove the key 4, 32 and unplug the 38 power cord. Remove the - Weslo Cadence 1020 | English Manual - Page 10
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at - Weslo Cadence 1020 | English Manual - Page 11
as shown. Using your left thumb, slide open the storage latch and hold it open. Pivot the treadmill until the frame is past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back - Weslo Cadence 1020 | English Manual - Page 12
back in. b. Make sure that the power cord is plugged in. c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 8. d. If the treadmill still will not run, please call our Customer Service Department, toll-free. PROBLEM: The displays of the console do not - Weslo Cadence 1020 | English Manual - Page 13
of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. PROBLEM: The walking belt slows when walked on SOLUTION - Weslo Cadence 1020 | English Manual - Page 14
problems. Exercise Frequency To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired. The key to success is to make exercise a regular and enjoyable part - Weslo Cadence 1020 | English Manual - Page 15
SUGGESTED STRETCHES The correct form for several basic stretches is shown in the drawings at the right. Move slowly as you stretchÑnever bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach - Weslo Cadence 1020 | English Manual - Page 16
Wire, Male/Female # 1 8Ó Red Wire, Male/Female # 1 UserÕs Manual * Includes all parts shown in the box Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the userÕs manual for information about ordering replacement parts. - Weslo Cadence 1020 | English Manual - Page 17
EXPLODED DRAWINGÑModel No. WLTL28081 R0798A 97 87 101 5 6 4 2 63 1 3 96 2 64 64 65 70 86 66 64 85 102 13 84 43 71 83 82 79 56 73 19 74 40 78 78 40 7 8 60 102 9 10 8 8 18 12 11* 67* 22 23* 28 24 25 8 13 61 19 21 20 26 99 8 15 16 17 28 29 30 8 36 37 95 - Weslo Cadence 1020 | English Manual - Page 18
WESLO CADENCE¨ 1020 treadmill). ¥ The SERIAL NUMBER of the product (see the front cover of this manual). ¥ The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
¤
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.—Fri., 6 a.m.—6 p.m. MST
Model No. WLTL28081
Serial No.
Write the serial number in the
space above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number Decal