Weslo Cadence 935 English Manual
Weslo Cadence 935 Manual
 |
View all Weslo Cadence 935 manuals
Add to My Manuals
Save this manual to your list of manuals |
Weslo Cadence 935 manual content summary:
- Weslo Cadence 935 | English Manual - Page 1
satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID .ÐFri., 6 a.m.Ð6 p.m. MST CAUTION Read all precautions and instructions in this manual before using this equipment. Save this - Weslo Cadence 935 | English Manual - Page 2
7 HOW TO FOLD AND MOVE THE TREADMILL 10 MAINTENANCE AND TROUBLE-SHOOTING 12 CONDITIONING GUIDELINES 14 ORDERING REPLACEMENT PARTS Back Cover LIMITED WARRANTY Back Cover Note: A PART LIST and an EXPLODED DRAWING are attached in the center of this manual. Remove the PART LIST and EXPLODED - Weslo Cadence 935 | English Manual - Page 3
SAVE THESE INSTRUCTIONS The decal shown at the right has been placed on your treadmill. If the decal is missing, or if it is not legible, please call our Customer Service Department, tollfree, to order a free replacement decal (see ORDERING REPLACEMENT PARTS on the back cover of this manual). Apply - Weslo Cadence 935 | English Manual - Page 4
youÕre not exercising, the unique CADENCE 935 can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill. If you have additional questions, please call our Customer Service Department toll-free at 1-800-999 - Weslo Cadence 935 | English Manual - Page 5
Leg Washer (70)Ð6 Flange Nut (9)Ð2 Upright Washer (38)Ð2 Console Screw/ Guide Screw (47)Ð6 Upright Bolt (48)Ð2 Base Leg Bolt (69)Ð4 Handrail . Note that the Console Base (52) and the Right Handrail (60) are connected to the treadmill by the Wire Harness (76). During assembly steps 1 through 3, - Weslo Cadence 935 | English Manual - Page 6
that the thick end of the Frame Guide is at the bottom. 3 52 61 Bracket 76 60 48 38 59 59 48 38 60 9 64 4 61 60 47 5 86 47 Thick end 14 87 place. 8. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or carpet from damage, place a mat under - Weslo Cadence 935 | English Manual - Page 7
risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a Your treadmill features a walking belt coated with grounding plug. Plug the power cord into a surge PERFORMANT LUBETM, a high-performance lubricant. protector, and plug the surge protector - Weslo Cadence 935 | English Manual - Page 8
. Next, slowly move the speed control until the walking belt begins to move at slow speed. Carefully step onto the walking belt and begin exercising. Change the speed of the walking belt as desired by moving the speed control. Step onto the foot rails of the treadmill. Next, find the clip attached - Weslo Cadence 935 | English Manual - Page 9
To turn off the power, simply wait for about six minutes. If the walking belt is stationary and the console buttons are not pressed for six minutes, the change the incline of the treadmill, first hold the rear roller endcap with one hand and raise the back of the treadmill a few inches. Using - Weslo Cadence 935 | English Manual - Page 10
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at - Weslo Cadence 935 | English Manual - Page 11
, slide open the storage latch. Pivot the treadmill until the frame guide and the foot rail are past the storage latch. If necessary, turn the incline leg as you raise the treadmill. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of - Weslo Cadence 935 | English Manual - Page 12
. See step 1 on page 8. d. If the treadmill still will not run, please call our Customer Service Department, toll-free. PROBLEM: The displays of the console do not function properly SOLUTION: a. Check the batteries in the console. If the batteries need to be replaced, see assembly step 8 on page - Weslo Cadence 935 | English Manual - Page 13
of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. PROBLEM: The walking belt slows when walked on SOLUTION - Weslo Cadence 935 | English Manual - Page 14
your heart rate as a guide. To find the proper heart set the speed control on the console to treadmill as needed. WORKOUT GUIDELINES Each workout should include the following three parts training zone for 20 to 60 minutes. (During the first help prevent post-exercise problems. Exercise Frequency To - Weslo Cadence 935 | English Manual - Page 15
SUGGESTED STRETCHES The correct form for several basic stretches is shown in the drawings at the right. Move slowly as you stretchÑnever bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach - Weslo Cadence 935 | English Manual - Page 16
Frame Guide Spacer Motor Hood Motor/Pulley/Flywheel/Fan Motor Belt Magnet Reed Switch Reed Switch Clip Hood Anchor Anchor Screw/Base Pad Screw Frame Pivot Nut Motor Pulley/Flywheel/Fan Motor Tension Bolt Motor Tension Washer Motor Star Washer Motor Tension Nut Motor Pivot Bolt Wire Clip Controller - Weslo Cadence 935 | English Manual - Page 17
49 13 88 4 69 6 11 2 3 2 2 1 71 70 70 64 74 67 22 61 66 65 63 9 67 22 80 73 77 38 49 48 58 60 22 39 73 76 75 9 74 67 56 49 55 49 76 47 48 38 59 79 62 73 65 63 64 66 67 22 - Weslo Cadence 935 | English Manual - Page 18
WESLO CADENCE¨ 935 treadmill). ¥ The SERIAL NUMBER of the product (see the front cover of this manual). ¥ The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
¤
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.—Fri., 6 a.m.—6 p.m. MST
Model No. WLTL26080
Serial No.
Write the serial number in the
space above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal