Weslo Cadence Dx8 English Manual
Weslo Cadence Dx8 Manual
 |
View all Weslo Cadence Dx8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Weslo Cadence Dx8 manual content summary:
- Weslo Cadence Dx8 | English Manual - Page 1
¨ Model No. WLTL46090 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee - Weslo Cadence Dx8 | English Manual - Page 2
FOLD AND MOVE THE TREADMILL 10 MAINTENANCE AND TROUBLE-SHOOTING 12 CONDITIONING GUIDELINES 14 ORDERING REPLACEMENT PARTS Back Cover LIMITED WARRANTY Back Cover Note: A PART LIST and an EXPLODED DRAWING are attached in the center of this manual. Remove the PART LIST and EXPLODED DRAWING before - Weslo Cadence Dx8 | English Manual - Page 3
THESE INSTRUCTIONS The decal shown at the right has been placed on your treadmill. If the decal is missing, or if it is not legible, please call our Customer Service Department, toll-free, to order a free replacement decal (see ORDERING REPLACEMENT PARTS on the back cover of this manual). Apply - Weslo Cadence Dx8 | English Manual - Page 4
). To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is WLTL46090. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). For your benefit, read this - Weslo Cadence Dx8 | English Manual - Page 5
ASSEMBLY Assembly requires two people. Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. The following tools (not included) are - Weslo Cadence Dx8 | English Manual - Page 6
onto the base of the Upright 5 (1) in the indicated location. Press the Allen Wrench (61) into the Adhesive Clip. 1 60 61 6. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the - Weslo Cadence Dx8 | English Manual - Page 7
adapter must be connected to a permanent HOW TO PLUG IN THE POWER CORD ground such as a properly grounded outlet box cover. Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your homeÕs power. Voltage surges, spikes - Weslo Cadence Dx8 | English Manual - Page 8
the following important precautions. ¥ Do not stand on the walking belt when turning on the power. ¥ Always wear the clip while operating the treadmill. When the key is removed from the console, the power will shut off. ¥ After the speed control is moved, there will be a pause before the walking - Weslo Cadence Dx8 | English Manual - Page 9
To vary the intensity of your exercise, the incline of the treadmill can be changed. There are three different incline levels. Before changing the incline, remove the key and unplug the power cord. To change the incline of the treadmill, first hold the rear roller endcap with one hand and raise - Weslo Cadence Dx8 | English Manual - Page 10
the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As - Weslo Cadence Dx8 | English Manual - Page 11
latch catch and the foot rail are past the storage latch. If necessary, turn the Incline leg as you lower the treadmill. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight. Incline Leg - Weslo Cadence Dx8 | English Manual - Page 12
sure that the power cord is plugged in. c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 8. d. If the treadmill still will not run, please call our Customer Service Department, toll-free. PROBLEM: The displays of the console do not function properly - Weslo Cadence Dx8 | English Manual - Page 13
the key and run the treadmill for the key and run the treadmill for key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. PROBLEM treadmill performance may decrease and the walking belt may be permanently damaged. Remove the key key and run the treadmill - Weslo Cadence Dx8 | English Manual - Page 14
individuals with pre-existing health problems. The pulse sensor is not your heart rate as a guide. The chart below shows recommended the speed and incline of the treadmill until your heart rate is near one key to success is to make exercise a regular and enjoyable part of your everyday life. 14 - Weslo Cadence Dx8 | English Manual - Page 15
SUGGESTED STRETCHES The correct form for several basic stretches is shown in the drawings below. Move slowly as you stretchÑnever bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down - Weslo Cadence Dx8 | English Manual - Page 16
PART LISTÑModel No. WLTL46090 Key No. Qty. 1 1 2 4 3 4 4 1 5 10 6 4 7 Treadmill Endcap Left Treadmill Endcap Belly Pan Fastener Ground Wire Latch Warning Decal Treadmill Incline Rod Rear Roller Latch Catch Electronic Bracket Rear Belly Pan Interface Bracket Belt Guide Screw Belt Guide - Weslo Cadence Dx8 | English Manual - Page 17
44 46 88 89 47 47 48 49 3 37 50 52 44 2 83 32 84 10 81 38 79 85 78 32 85 80 74 78 32 86 87 65 36 90 45 77 33 76 73 65 74 75 82 51 72 65 32 95 70 65 65 44 55 69 53 65 63 64 20 62 2 66 58 57 59 57 93 94 60 61 62 2 57 R0299A EXPLODED DRAWINGÑModel No. WLTL46090 - Weslo Cadence Dx8 | English Manual - Page 18
MODEL NUMBER of the product (WLTL46090). ¥ The NAME of the product (WESLO¨ CADENCE DX8 treadmill). ¥ The SERIAL NUMBER of the product (see the front cover of this manual). ¥ The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART one of its authorized service centers. All repairs for
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.—Fri., 6 a.m.—6 p.m. MST
Model No. WLTL46090
Serial No.
Write the serial number in the
space above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
¤