Weslo Pro 11.2x Bike English Manual - Page 6

ASSEMBLY •• To hire an authorized service technician to assemble this product, call 1-800-445-2480. •• To watch an assembly video, go to http://productvideo.co/ assembly/kmart/weslo or use your mobile phone or smartphone to read the QR code at the right. •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• Left parts are marked “"L”" or “"Left”" and right parts are marked “"R”" or “"Right.”" •• To identify small parts, see page 5. In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Orient the Front Stabilizer (32) as indicated by the decal. 1 While a second person lifts the front of the Frame (1), attach the Front Stabilizer (32) with two M10 x 80mm Screws (54). 32 54 1 2. Orient the Rear Stabilizer (31) and the Carriage Rail (9) as shown. 2 Attach the Rear Stabilizer (31) to the Carriage Rail (9) with three M8 x 36mm Screws (26). Do 26 not tighten the Screws yet. 9 31 6