Weslo Pursuit G 3.1 Bike English Manual - Page 6
Assembly
View all Weslo Pursuit G 3.1 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Identify the Front Stabilizer (16), which is shorter than the Rear Stabilizer (not shown). 1 While a second person lifts the front of the Frame (1), attach the Front Stabilizer (16) to the Frame with two M10 x 65mm Bolts (28). 16 28 2. Attach the Rear Stabilizer (15) to the Seat Frame (2) with two M10 x 65mm Bolts (28) and two M10 2 Locknuts (45). 1 2 45 15 28 6