Weslo Wetl40708 Instruction Manual

Weslo Wetl40708 Manual

Weslo Wetl40708 manual content summary:

  • Weslo Wetl40708 | Instruction Manual - Page 1
    : [email protected] Write: ICON Health & Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road, Beeston Leeds, LS11 8JG, UK CAUTION Read all precautions and instructions in this manual before using this equipment. Save this
  • Weslo Wetl40708 | Instruction Manual - Page 2
    15 HOW TO FOLD AND MOVE THE TREADMILL 20 TROUBLESHOOTING 22 EXERCISE GUIDELINES 25 PART LIST 26 EXPLODED DRAWING decal is missing or illegible, call the telephone number on the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note:
  • Weslo Wetl40708 | Instruction Manual - Page 3
    with pre-existing health problems. 2. It is 3. Use the treadmill only as described in this manual. 4. Place the treadmill on a level surface, treadmill is not working properly. (See TROUBLESHOOTING on page 22 if the treadmill is in the treadmill. Athletic support clothes are recommended for both
  • Weslo Wetl40708 | Instruction Manual - Page 4
    performing the maintenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized ser- vice representative
  • Weslo Wetl40708 | Instruction Manual - Page 5
    serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. Before reading further, please familiarize yourself with the parts that are labeled in the drawing below. Accessory Tray Handrail Console Pulse Sensor Key
  • Weslo Wetl40708 | Instruction Manual - Page 6
    assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
  • Weslo Wetl40708 | Instruction Manual - Page 7
    1. Make sure that the power cord is unplugged. Orient the Base (101) as shown. Attach four Base Feet (100) to the Base (101) in the locations shown with four M4.2 x 19mm Foot Screws (14). 1 14 100 100 14 101 14 100 14 100 2. Identify the Right Upright (98), which has a 2 square hole in the
  • Weslo Wetl40708 | Instruction Manual - Page 8
    3. Orient the Left Upright (96) and the Base (101) 3 as shown. Attach the Left Upright to the Base with two M10 x 53mm Patch Bolts (18), two M10 Flat Washers (16), and two M10 Star Washers (8); do not fully tighten the Patch Bolts yet. 96 4. To protect the floor or carpet from damage, place a
  • Weslo Wetl40708 | Instruction Manual - Page 9
    5. See the left inset drawing. Identify the two Upright Spacers (99). Open the included packet 5 of grease, and apply grease to both sides of both Upright Spacers. Next, identify the outer side of each Upright Spacer. Have a second person raise the Frame (67) and hold it until step 7 is
  • Weslo Wetl40708 | Instruction Manual - Page 10
    7. Identify the Right Handrail Cover (95) and the Left Handrail Cover (93). Slide the end of the 7 Right Handrail (94) through the hole in the Right Hole Handrail Cover, and slide the end of Left Handrail (92) through the hole in the Left Handrail Cover. 95 94 10 Attach the Handrail Covers (93
  • Weslo Wetl40708 | Instruction Manual - Page 11
    9. Attach the Right Handrail (94) to the Console (109) with an M5 x 16mm Screw (13), an M5 Star Washer (12), and two M4.2 x 19mm Screws (10). Make sure that no wires are pinched. Start all three Screws before tightening any of them. Tighten the M5 x 16mm Screw and then tighten the M4.2 x 19mm Screws
  • Weslo Wetl40708 | Instruction Manual - Page 12
    11. Attach the Console (109) to the Uprights (96, 11 98) with six M8 x 16mm Bolts (17) and six 5/16" Star Washers (2). Start all six Bolts before tightening them. 109 2 17 96 17 2 2 17 2 98 12. With the help of a second person, lower the Uprights (96, 98) as shown. 12 See the inset
  • Weslo Wetl40708 | Instruction Manual - Page 13
    13. Attach the ground wire on the Upright Wire (97) to the indicated hole in the Base (101) with a #8 x 3/4" Ground Screw (11). Press the Grommet (90) into the Right Upright (98). 13 Hole 98 101 Ground Wire 90 11 97 14. With the help of a second person, raise the Right Upright (98) and the Left
  • Weslo Wetl40708 | Instruction Manual - Page 14
    15. Attach the Rear Feet (70, 71) to the Frame (67) with four #8 x 1" Screws (7). 15 Lower the Frame (67) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 71 70 67 7 7 16. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep
  • Weslo Wetl40708 | Instruction Manual - Page 15
    OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause
  • Weslo Wetl40708 | Instruction Manual - Page 16
    of features designed to make your workouts more effective. When you select the manual mode of the console, you can change the speed and incline of the incline of the treadmill as it guides you through an effective workout. To turn on the power, see page 17. To use the manual mode, see page 17. To
  • Weslo Wetl40708 | Instruction Manual - Page 17
    you press a button, the incline setting will change by 0.5 percent; if you hold down a button, the incline setting will change quickly. HOW TO USE THE MANUAL MODE 1. Insert the key into the console. See HOW TO TURN ON THE POWER above. 5. Follow your progress with the displays. The display features
  • Weslo Wetl40708 | Instruction Manual - Page 18
    • Incline-This mode displays the incline of the treadmill whenever the incline changes. • Pulse-This mode displays your heart rate whenever you use the handgrip pulse sensor. into the console, and then release the Stop button. An "M" for metric kilometers or an "E" for English miles will appear in
  • Weslo Wetl40708 | Instruction Manual - Page 19
    workout. Hold the handrails and begin walking. If the speed or incline setting for the current segment is too high or too low, you can manually override the setting by pressing the Speed or Incline buttons; however, when the next segment begins, the treadmill will automatically adjust to the speed
  • Weslo Wetl40708 | Instruction Manual - Page 20
    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift
  • Weslo Wetl40708 | Instruction Manual - Page 21
    HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be necessary to push the frame forward as you pull the knob to the left. Pivot the frame downward and release the latch knob. Frame Latch Knob 2. Hold
  • Weslo Wetl40708 | Instruction Manual - Page 22
    TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power
  • Weslo Wetl40708 | Instruction Manual - Page 23
    treadmill for a few minutes to check for a correct speed reading. 1/8 in. 38 55 58 49 Top View PROBLEM: The incline of the treadmill does not change correctly SOLUTION: a. With the key in the console, press one of walking belt still slows when walked on, see the front cover of this manual. 23
  • Weslo Wetl40708 | Instruction Manual - Page 24
    PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG
  • Weslo Wetl40708 | Instruction Manual - Page 25
    for persons over the age of 35 or persons with pre-existing health problems. The pulse sensor is not a medical device. Various factors may affect the key to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended heart rates
  • Weslo Wetl40708 | Instruction Manual - Page 26
    WETL40708.0 To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. R0808A Key No. Qty. 1 2 2 6 3 3 4 2 5 2 6 1 99 2 100 4 Description Rear Cushion Left Platform Cushion Belt Guide Frame Spacer Reed Switch Reed Switch Clamp Frame Cap Drive Roller/Pulley
  • Weslo Wetl40708 | Instruction Manual - Page 27
    White Wire, 2F 12" White Wire, 2F 6" Blue Wire, 2F 8" Blue Wire, 2F 14" Blue Wire, M/F 4" Black Wire, 2F Userʼs Manual Note: Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. *These parts are not illustrated. 27
  • Weslo Wetl40708 | Instruction Manual - Page 28
    EXPLODED DRAWING A-Model No. WETL40708.0 R0808A 28 14 50 30 30 30 106 29 28 38 39 51 31 68 36 38 39 33 69 19 71 33 36 7 108 114 70 112 48 30 42 30 19 53 52 32 21 55 54 37 31 23 19 42 38 56 57 49 59 58 10 40 38 61 60 31 37 57 66 31 28 65 21 19 32 30 29 47
  • Weslo Wetl40708 | Instruction Manual - Page 29
    EXPLODED DRAWING B-Model No. WETL40708.0 43 72 43 R0808A 43 43 24 25 74 20 73 46 26 75 3 76 38 27 34 82 35 24 39 6 22 113 22 79 80 35 38 77 83 34 84 46 81 85 78 14 86 87 14 14 88 89 14 90 29
  • Weslo Wetl40708 | Instruction Manual - Page 30
    EXPLODED DRAWING C-Model No. WETL40708.0 R0808A 92 10 10 10 91 12 41 10 95 13 10 93 2 17 94 10 17 2 41 41 91 12 13 17 2 2 17 96 17 9 102 103 102 4 15 8 8 16 18 107 100 101 14 5 5 105 102 103 102 97 99 100 14 98 99 97 11 90 8 4 15 107 100 14 9 100 14 8 16 18
  • Weslo Wetl40708 | Instruction Manual - Page 31
    EXPLODED DRAWING D-Model No. WETL40708.0 R0808A 45 110 10 111 109 10 10 31
  • Weslo Wetl40708 | Instruction Manual - Page 32
    the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • the key number and description of the the PART LIST and the EXPLODED DRAWING near the end of this manual) RECYCLING INFORMATION This electronic product must not be disposed of in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

USER'S MANUAL
Serial
Number
Decal
Model No. WETL40708.0
Serial No.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
QUESTIONS?
As a manufacturer, we are commit-
ted to providing complete customer
satisfaction. If you have questions,
or if there are missing parts,
please contact us at the numbers
or addresses listed below:
Call: 08457 089 009
Outside UK: 0 (44) 113 3877133
Fax: 0 (44) 113 3877125
Write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG,
UK
Write the serial number in the
space above for reference.