Weslo Wlevsy1922 Instruction Manual
Weslo Wlevsy1922 Manual
 |
View all Weslo Wlevsy1922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Weslo Wlevsy1922 manual content summary:
- Weslo Wlevsy1922 | Instruction Manual - Page 1
& Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK email: [email protected] CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Visit our website at www.iconeurope.com - Weslo Wlevsy1922 | Instruction Manual - Page 2
5 ADJUSTMENTS 14 WEIGHT RESISTANCE CHART 16 CABLE DIAGRAM 17 TROUBLESHOOTING AND MAINTENANCE 18 ORDERING REPLACEMENT PARTS Back Cover Note: A and PART LIST/EXPLODED DRAWING are attached to the centre of this manual. Remove the PART IDENTIFICATION CHART and PART LIST/EXPLODED DRAWING before - Weslo Wlevsy1922 | Instruction Manual - Page 3
to support a maximum Service Department at 08457 089 009 and order a free replacement decal. Apply the decal in the location shown. ! WARNING • Misuse of this product may result in serious injury. • Read user's manual and follow all warnings and operating instructions problems. Read all instructions - Weslo Wlevsy1922 | Instruction Manual - Page 4
will help you to achieve the specific results you want. For your benefit, read this manual carefully before using the weight system. If you have questions after reading this manual, please call our Customer Service Department at 08457 089 009. To help us assist you, please note the product model - Weslo Wlevsy1922 | Instruction Manual - Page 5
as well as friction between the cables, pulleys, and weight guides. Note: 1 lb. = .454 kg. WEIGHT PLATES Make Things Easier for Yourself Everything in this manual is designed to ensure that the weight Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the - Weslo Wlevsy1922 | Instruction Manual - Page 6
(19) over the indicated holes in the bracket on the Base (1). Insert the two Weight Guides (16) into the holes and attach them to the Base with an M10 x 155mm Bolt the Locking Bar (27) into the indicated hole in one of the Weight Guides (16) and secure the Locking Bar with the Lock (28). Remove the - Weslo Wlevsy1922 | Instruction Manual - Page 7
The instructions below describe how each part of the weight system can be adjusted. Refer to the exercise guide accompanying this manual to see shown) in the same manner. 47 35 32 14 4. Attach the two Base Supports (22) to the Stabiliser (2) with two M10 x 70mm Bolts (64), two M10 Washers ( - Weslo Wlevsy1922 | Instruction Manual - Page 8
If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables; see TROUBLESHOOTING AND - Weslo Wlevsy1922 | Instruction Manual - Page 9
21. Press two 38mm Square Inner Cap (53) into the Leg Lever (8). Attach the Seat Bumper (40) with an 21 M4 x 20mm Screw (84) and an M6 Washer (63). Lubricate the M10 x 62mm Bolt (87) with grease. Attach the Leg Lever (8) to the Seat Frame (5) with the Bolt and an M10 Nylon Locknut (68). Do not - Weslo Wlevsy1922 | Instruction Manual - Page 10
14. Attach the Long Cable (47) to the Small "U"Bracket (24) with an M8 Nylon Locknut (58) and an M8 Washer (60). See the inset drawing. Do not overtighten the Nylon Locknut; it should be threaded onto the end of the Cable only two turns. Attach the Small "U"-Bracket (24) to the Weight Tube (26) with - Weslo Wlevsy1922 | Instruction Manual - Page 11
assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it - Weslo Wlevsy1922 | Instruction Manual - Page 12
PART IDENTIFICATION CHART-Model No. WLEVSY19220 R1203A M6 Washer (63) M8 Washer (60) M10 Washer (62) M6 Nylon Locknut (61) M8 Nylon Locknut (58) M10 Nylon Locknut (68) M6 x 16mm Screw (67) M4 x 20mm Screw (84) M8 x 42mm Bolt (79) M10 x 45mm Bolt (82) M6 x 50mm Screw (70) M6 x 50mm Carriage Bolt ( - Weslo Wlevsy1922 | Instruction Manual - Page 13
M10 x 45mm Bolt 83 1 M10 x 90mm Bolt 84 1 M4 x 20mm Screw 85 1 Cable Trap 86 1 Support Plate 87 1 M10 x 62mm Bolt 88 1 Eyebolt # 1 User's Manual # 1 Exercise Guide Note: "#" indicates a non-illustrated part. Specifications are subject to change without notice. REMOVE THIS PART LIST - Weslo Wlevsy1922 | Instruction Manual - Page 14
EXPLODED DRAWING-Model No. WLEVSY19220 R1203A 62 68 16 76 62 43 44 43 68 23 48 27 65 58 60 68 51 77 64 86 82 29 85 20 82 29 44 58 52 44 83 62 59 68 46 68 4 44 52 59 68 51 59 46 45 55 45 46 45 55 50 68 50 68 49 3 49 9 47 79 62 68 24 28 62 76 60 58 26 25 68 2 62
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
USER'S MANUAL
Model No. WLEVSY19220
Serial No.
Write the serial number in the
space above for reference.
Serial Number Decal
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Part No. 188936 R1203A
Printed in China © 2003 ICON Health & Fitness, Inc.
www.iconeurope.com
Visit our website at
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
Please provide the following information when ordering replacement parts:
• the MODEL NUMBER of the product (WLEVSY19220)
• the NAME of the product (WESLO
®
GYM 1500)
• the SERIAL NUMBER of the product (see the front cover of this manual)
•
the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING in the
centre of this manual)
08457 089 009
QUESTIONS?
As a manufacturer, we are
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing parts, please call:
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: [email protected]
08457 089 009