Western Digital WD20000H1NC User Manual

Western Digital WD20000H1NC - World Edition Manual

Get Western Digital WD20000H1NC - World Edition PDF manuals and user guides View all Western Digital WD20000H1NC manuals
Add to My Manuals
Save this manual to your list of manuals

Western Digital WD20000H1NC manual content summary:

  • Western Digital WD20000H1NC | User Manual - Page 1
    Single and Dual-drive Network Storage Systems My Book® World Edition™ User Manual
  • Western Digital WD20000H1NC | User Manual - Page 2
    to qualified service personnel under the following conditions: a When the power cord or plug is damaged or frayed. b If liquid has been spilled on the product. c If the product has been exposed to rain or water. d If the product does not operate normally when the operating instructions are followed
  • Western Digital WD20000H1NC | User Manual - Page 3
    5 Accessories 5 System Requirements 6 Pre-Installation 6 Recording Your WD Product Information 7 System View 8 Ports 8 Reset Button 8 Power Button 9 Kensington Security Slot 9 LED Indicators (Lights 10 2 My Book World Edition Basic Setup 11 Step 1: Connect My Book World Edition to the
  • Western Digital WD20000H1NC | User Manual - Page 4
    64 Media Devices 66 7 Using iTunes with My Book World Edition 73 iTunes Media Server Overview 73 Media Types Supported 73 Storing Content 73 Streaming Audio in iTunes 73 8 Using WD Discovery (Windows only 75 Mapping a Network Drive 75 Browse Network Shares 77 Desktop Shortcut Creation
  • Western Digital WD20000H1NC | User Manual - Page 5
    Users Tab 140 Status Tab 147 11 Download Manager: Downloader 151 Accessing Downloader 151 Downloader Features 152 HTTP/FTP Tab 152 CTorrent Tab 157 12 Connecting and Managing a USB Hard Drive . . .163 Connecting 163 Copy Manager 163 Accessing Copy Manager 164 My Book World Edition-to-USB
  • Western Digital WD20000H1NC | User Manual - Page 6
    13 Replacing a Drive (My Book World Edition II) . . .169 14 Troubleshooting 173 15 Glossary 180 Appendix 185 Regulatory Compliance 185 Environmental Compliance (China 186 Warranty Information 186 GNU General Public License ("GPL 187 Index 188 TABLE OF CONTENTS - iv
  • Western Digital WD20000H1NC | User Manual - Page 7
    website at support.wdc.com and choose from these topics: • Downloads - Download drivers, software, and updates for your WD product. • Registration - Register your WD product to get the latest updates and special offers. • Warranty & RMA Services - Get Warranty, Product Replacement (RMA), RMA Status
  • Western Digital WD20000H1NC | User Manual - Page 8
    MY BOOK WORLD EDITION USER MANUAL Registering Your WD Product Your WD product includes 30 days of free technical support during the applicable warranty period for your product. The 30-day period commences on the date of your first telephone contact with WD technical support. Register online at
  • Western Digital WD20000H1NC | User Manual - Page 9
    two WD drives using WD GreenPower™ technology for efficient cooling and power saving. The high-speed interface delivers high performance for small offices or home users and is ideal for backing up and sharing files over the Internet. This user manual provides step-by-step installation instructions
  • Western Digital WD20000H1NC | User Manual - Page 10
    MY BOOK WORLD EDITION USER MANUAL Specifications Ethernet High performance (10/100/1000) Gigabit Ethernet connection Internal hard drive WD 3.5-inch SATA hard drive External USB storage NTFS, FAT, HFS+J file systems supported Supported protocols HTTP, HTTPS, HFS+J, CIFS/SMB, NFS, FTP I/O
  • Western Digital WD20000H1NC | User Manual - Page 11
    Kit Contents MY BOOK WORLD EDITION USER MANUAL My Book World Edition AC adapter* Ethernet cable Installation CD with application software and user manual Quick Install Guide 1 2 3 4 5 1 2 3 4 5 or 1 USA, Japan, Taiwan, Brazil, Mexico, Colombia 2 Europe, Korea, Brazil, Chile 3
  • Western Digital WD20000H1NC | User Manual - Page 12
    you install the latest updates and service pack (SP). For Mac OS X, go to the Apple menu and select Software Update. For Windows, go to the Start menu and select Windows Update. Client Computer • Ethernet connection (network adapter) • Operating system • Windows 2003 Active Directory Service/Windows
  • Western Digital WD20000H1NC | User Manual - Page 13
    model number of your new WD product found on the label on the bottom of the device. Also, write the purchase date and other notes such as your operating system and version. This information is necessary for setup and technical support. Serial Number: Model Number: Purchase Date: System and Software
  • Western Digital WD20000H1NC | User Manual - Page 14
    "Connecting and Managing a USB Hard Drive" on page 163 for detailed instructions. Connects the device to a local network. Reset button Press to restore the admin user name and password for the device. Power port Connects the device to an AC adapter and the power outlet. Reset Button The reset
  • Western Digital WD20000H1NC | User Manual - Page 15
    MY BOOK WORLD EDITION USER MANUAL Important: The device powers on automatically upon initial connection to power, which may take up to three minutes. During this time, do not press the power button. After the initial setup, you need to use the power button to turn the unit on and off. The power
  • Western Digital WD20000H1NC | User Manual - Page 16
    MY BOOK WORLD EDITION USER MANUAL LED Indicators (Lights) The Power/Activity and Capacity Gauge indicators are represented by a single bar of six LEDs (lights) on the front panel of the drive. Power/Activity LED Behavior Power On Sequence Appearance Bottom LED dimmed LEDs light up in sequence from
  • Western Digital WD20000H1NC | User Manual - Page 17
    for more information. 3. Connect the end of the adapter into the DC power supply socket located on the back of the device. 4. Plug the AC adapter into a power outlet. The unit powers up automatically. Important: Wait for the My Book World Edition to finish powering up (approximately three minutes
  • Western Digital WD20000H1NC | User Manual - Page 18
    /Windows 7 Note: The WD Discovery application on the included CD should be installed on every PC connected to the LAN from which you intend to access your My Book World Edition. 1. Turn on your computer and wait for the operating system to load. 2. Insert the product CD into the CD or DVD ROM drive
  • Western Digital WD20000H1NC | User Manual - Page 19
    MY BOOK WORLD EDITION USER MANUAL 5. If you have connected the My Book device properly as shown in the Connect screen, click the Next button. 6. The Application Installer screen opens, displaying a list of options. Click WD Discovery Tool. Once the WD Discovery Tool installation is complete, it
  • Western Digital WD20000H1NC | User Manual - Page 20
    or manually, it keeps the same drive letter. 9. Close the WD Discovery Tool. 10. Click Start and then (My) Computer. The network drives display. You can now drag and drop files into the network drive folders using (My) Computer or Windows Explorer. MY BOOK WORLD EDITION BASIC SETUP - 14
  • Western Digital WD20000H1NC | User Manual - Page 21
    EDITION USER MANUAL Using Windows Vista/Windows 7 Windows Vista and Windows 7 offer an alternative to WD Discovery for easy setup and mapping of the unit. 1. For Windows Vista/Windows 7, click Start>Computer>Network. 2. Right-click MyBookWorld in the Network and Sharing center and select Install
  • Western Digital WD20000H1NC | User Manual - Page 22
    search online (recommended). MY BOOK WORLD EDITION USER MANUAL Windows starts searching for the driver. Depending on your system setup, it may take a minute or so to locate the driver. 5. When installation is complete, a confirmation message displays. Click Close. MY BOOK WORLD EDITION BASIC
  • Western Digital WD20000H1NC | User Manual - Page 23
    MY BOOK WORLD EDITION USER MANUAL A My Book World Edition icon displays next to MyBookWorld, and an Open option displays in the drop-down menu. To open the My Book World Edition shares: 1. Right-click MyBookWorld and select Open from the drop-down menu. The Public, Configuration, and Download shares
  • Western Digital WD20000H1NC | User Manual - Page 24
    MY BOOK WORLD EDITION USER MANUAL Note: (See "Accessing My Book World Edition's Network Storage Manager" on page 86 for information on logging in.) To view the properties of the My Book World Edition: 1. Right-click MyBookWorld and select Properties from the drop-down menu. The MyBookWorld
  • Western Digital WD20000H1NC | User Manual - Page 25
    MY BOOK WORLD EDITION USER MANUAL Using Mac OS X Leopard/Snow shared drive icon permanent on the desktop, create an alias. Following are two ways to do that: Note: Before creating an alias, click Finder>Preferences and make sure Connected Servers location. MY BOOK WORLD EDITION BASIC SETUP - 19
  • Western Digital WD20000H1NC | User Manual - Page 26
    MY BOOK WORLD EDITION USER MANUAL • Double-click the item you want to alias (e.g., the Public , and double-click the Mybookworld icon. 3. Type "admin" in both the Name and Password fields, and then click Connect. 4. Make sure that Public is highlighted in the Select the volumes to mount list, and then
  • Western Digital WD20000H1NC | User Manual - Page 27
    MY BOOK WORLD EDITION USER MANUAL 5. Double-click the Public icon that is now on your desktop to display three shared subfolders. You can now drag and drop files into the shared folders using Finder. 6. If you want to make the shared drive icon permanent on the desktop, create an alias. Following
  • Western Digital WD20000H1NC | User Manual - Page 28
    see "How to Play/Stream Video, Music & Photos" on page 64) • Using iTunes®service (see "Using iTunes with My Book World Edition" on page 73) • Connecting a USB drive for additional storage and file exchange (see "Using WD Discovery (Windows only)" on page 75 and "Click the Submit button to apply the
  • Western Digital WD20000H1NC | User Manual - Page 29
    My World Book Edition connected to your local area network and powered on before you install WD Anywhere Backup software. This ensures that the WD Anywhere Backup recognizes your My World Book Edition and installs as the full software version instead of the 30 Day trial version. • Laptop Users: When
  • Western Digital WD20000H1NC | User Manual - Page 30
    BOOK WORLD EDITION USER MANUAL 7. Select your preferred language from the list and click OK. 8. Close all other open applications, and then click the Next button to continue. 9. If you accept the terms of the agreement, click I Agree to continue. 10. After WD Anywhere Backup has finished installing
  • Western Digital WD20000H1NC | User Manual - Page 31
    to load. 2. Insert the software CD into the CD-ROM drive. 3. Double-click the My Book World Edition CD icon that mounts to the desktop. 4. Open the WD_Mac_Tools folder and double-click WDAnywhereBackup.dmg. 5. Continue with "Configuring WD Anywhere Backup" on page 26. BACKING UP COMPUTERS ON THE
  • Western Digital WD20000H1NC | User Manual - Page 32
    videos, on your computer's hard drive with the click of a button. This feature backs up your data to the My Book World Edition so you can restore your data in the event that your computer's hard drive crashes. The first time you install WD Anywhere Backup, the WD Anywhere Backup Configuration screen
  • Western Digital WD20000H1NC | User Manual - Page 33
    MY BOOK WORLD EDITION USER MANUAL Customized Backup: The other option is to customize your backup to back up only selected types of files, for example, only photos or videos, or other drives. To start an automatic and complete backup of your computer's hard drive: 1. Click the Begin Backup button.
  • Western Digital WD20000H1NC | User Manual - Page 34
    MY BOOK WORLD EDITION USER MANUAL The WD Anywhere Backup screen displays the progress of the backup and the percentage of CPU used. When the backup has finished, a backup complete message displays. BACKING UP COMPUTERS ON THE NETWORK - 28
  • Western Digital WD20000H1NC | User Manual - Page 35
    BOOK WORLD EDITION USER MANUAL To customize a backup plan: 1. Click the Customize My Backup link at the bottom right of the WD Anywhere Backup Configuration screen. The Welcome to the WD against data loss. 1. If WD Anywhere Backup is not already running, click the WD Anywhere Backup icon on the
  • Western Digital WD20000H1NC | User Manual - Page 36
    3. The welcome screen displays. Click the Next button. MY BOOK WORLD EDITION USER MANUAL 4. Click Network Places to locate your My Book World Edition on your local area network. Click the Next button. BACKING UP COMPUTERS ON THE NETWORK - 30
  • Western Digital WD20000H1NC | User Manual - Page 37
    5. Click All Items from SmartPicks. MY BOOK WORLD EDITION USER MANUAL You have two options: • To select specific items: See "Selecting your own backup items" on page 34. do not want to see this message again, select the check box at the bottom. Click OK. BACKING UP COMPUTERS ON THE NETWORK - 31
  • Western Digital WD20000H1NC | User Manual - Page 38
    MY BOOK WORLD EDITION USER MANUAL 3. The SmartPicks screen displays, listing common file types that you can back up. Select each file type you want to back up. You can also click Select None to clear all selections, or click Select All to select all of the items. 4. To add more items,
  • Western Digital WD20000H1NC | User Manual - Page 39
    more items from your plan: (a) Click the Show Advanced Items button. MY BOOK WORLD EDITION USER MANUAL (b) Click the Add Exclusion button. (c) Select items to exclude from the backup Next button. 7. Continue with "Completing the Backup Plan" on page 35. BACKING UP COMPUTERS ON THE NETWORK - 33
  • Western Digital WD20000H1NC | User Manual - Page 40
    Selecting your own backup items MY BOOK WORLD EDITION USER MANUAL 1. Click the My Own Backup Items button. The SmartPicks screen appears, listing default file locations you can back up. 2. You have two options: (a) On the SmartPicks tab, select each item you want to back up. You can also click
  • Western Digital WD20000H1NC | User Manual - Page 41
    MY BOOK WORLD EDITION USER MANUAL 3. On the Items Selected for Backup screen, you can add more items or use advanced items as described in " Name your backup plan and click the Next button. You can create additional backup plans by repeating the steps above. BACKING UP COMPUTERS ON THE NETWORK - 35
  • Western Digital WD20000H1NC | User Manual - Page 42
    appears. Click Done. MY BOOK WORLD EDITION USER MANUAL 3. A message explains that initial backup will use moderate resources on your computer. To pause the backup, click Pause until System Idle. 4. To keep the backup running in the background, click Continue. The WD Anywhere Backup screen displays
  • Western Digital WD20000H1NC | User Manual - Page 43
    MY BOOK WORLD EDITION USER MANUAL When the backup finishes, the Backup Complete screen appears. Alternatively, close the screen, click the WD Anywhere Backup icon, and select Show backup status. As files are backed up, a small notification window appears. BACKING UP COMPUTERS ON THE NETWORK - 37
  • Western Digital WD20000H1NC | User Manual - Page 44
    BOOK WORLD EDITION USER MANUAL Restoring a Backup Plan You can restore the files in your backup plan to a specified location in the event that you accidentally delete a file, want to compare file versions, or have lost all data due to a hard drive button. BACKING UP COMPUTERS ON THE NETWORK - 38
  • Western Digital WD20000H1NC | User Manual - Page 45
    MY BOOK WORLD EDITION USER MANUAL Reactivating a Backup Plan You may reactivate an old backup plan if you want to continue backing up the files specified in that plan. 1. On the menu bar, click Actions>Reactivate Backup Plan. 2. The Reactivate wizard appears. Click the Next button. BACKING UP
  • Western Digital WD20000H1NC | User Manual - Page 46
    MY BOOK WORLD EDITION USER MANUAL 3. Browse to select the location of the backup folder and click the Next button. 4. If you have more than one backup plan, select the one you want to reactivate and click OK. BACKING UP COMPUTERS ON THE NETWORK - 40
  • Western Digital WD20000H1NC | User Manual - Page 47
    The following screen appears: MY BOOK WORLD EDITION USER MANUAL 5. Select the No, just reactivate the backup plan and start backing up option and click the Next button. Your backup plan is reactivated, and your computer backs up files onto your selected backup destination. Important: If you select
  • Western Digital WD20000H1NC | User Manual - Page 48
    MY BOOK WORLD EDITION USER MANUAL Editing a Backup Plan Icons Click the icons to add page 42.) The WD Anywhere Backup Configuration screen appears. Note: To deselect all listed files, click the Select None link. To select all the listed files, click the Select All link. BACKING UP COMPUTERS ON THE
  • Western Digital WD20000H1NC | User Manual - Page 49
    MY BOOK WORLD EDITION USER MANUAL 2. Do one of the following: • To add number of earlier versions of your files to keep. 2. Click OK. Removing a Backup Plan You can delete a backup plan on the WD Anywhere Backup screen. Your backed up files remain at their destination until you delete them manually
  • Western Digital WD20000H1NC | User Manual - Page 50
    MY BOOK WORLD EDITION USER MANUAL 1. Select the backup plan, and click the Show Backup Log icon. This selection affects all backup plans. 7. To see which files have been backed up, click the click here to launch the WD Anywhere Restore application link. (For information on restoring, see "Restoring a
  • Western Digital WD20000H1NC | User Manual - Page 51
    EDITION USER MANUAL 4 Using Time Machine™ The Apple® Time Machine™ is a built-in feature on Mac OS X Leopard and Snow Leopard computers that can back up everything on your computer: music, photos, documents, applications, e-mails, and system files. The My Book World Edition drive (firmware 1.00.28
  • Western Digital WD20000H1NC | User Manual - Page 52
    and select the My Book World Edition drive where you want the backups stored. 4. Click the Use for Backup button. A screen prompts you for your user name and password. Enter wd_backup as the user name and backup as the password (not case-sensitive). 5. Click the Connect button. The Preferences
  • Western Digital WD20000H1NC | User Manual - Page 53
    MY BOOK WORLD EDITION USER MANUAL 7. To add a Time Machine drop-down menu to the menu bar of the backup. Time Machine backs up your computer every hour and keeps the following backup sets: • Every hour for 24 hours • Every day for the past month • Weekly until the My Book drive is full. If a backup
  • Western Digital WD20000H1NC | User Manual - Page 54
    on the My Book World Edition drive. For example, you may have lost a file, or you want to see files from a week ago. You can restore individual items, multiple items, folders, or if your system crashes, your entire hard drive. To restore backed-up items to your hard drive: 1. Open the window on your
  • Western Digital WD20000H1NC | User Manual - Page 55
    MY BOOK WORLD EDITION USER MANUAL 3. Click the arrows or the time line on the right the item from the backup drive Keep Both - The original item will remain and the backed-up item will be added to the selected location on your computer. Replace - The backed-up item replaces the original item. USING
  • Western Digital WD20000H1NC | User Manual - Page 56
    you try to connect to it, you will get a "Connection Failed" message. To delete your entire backup: 1. In Finder, select the My Book World Edition drive and click the Connect As button. 2. Enter wd_backup as the user name and backup as the password (not casesensitive) and click Connect. USING TIME
  • Western Digital WD20000H1NC | User Manual - Page 57
    The following screen displays. MY BOOK WORLD EDITION USER MANUAL 3. Select the backup folder and then drag the *.sparsebundle file to the Trash icon. Changing Your Password You can change your default password for your My Book World to access Time Machine. To change your password: 1. Log in to the
  • Western Digital WD20000H1NC | User Manual - Page 58
    3. Click the Users button in Basic mode. MY BOOK WORLD EDITION USER MANUAL 4. Click the icon to the right of the user name (WD_Backup). 5. When the Users page appears, enter your new password in the New and Confirm password fields and click the Submit button USING TIME MACHINE™ - 52
  • Western Digital WD20000H1NC | User Manual - Page 59
    6. A confirmation message displays. MY BOOK WORLD EDITION USER MANUAL USING TIME MACHINE™ - 53
  • Western Digital WD20000H1NC | User Manual - Page 60
    . 2. Insert the My Book World Edition software CD into the CD-ROM drive. Note: If AutoPlay is disabled on your computer, you must install the utilities manually. Click Start (or on Windows 7) and then Computer (Windows Vista/Windows 7) or My Computer (Windows XP). Doubleclick Setup.exe in the root
  • Western Digital WD20000H1NC | User Manual - Page 61
    MY BOOK WORLD EDITION USER MANUAL 6. Click the MioNet New Account button if you are a new MioNet user; click MioNet - Existing Account if you are an existing user. The MioNet registration screen appears. 7. Complete the registration form and click the Submit button to create an account. MIONET®
  • Western Digital WD20000H1NC | User Manual - Page 62
    MY BOOK WORLD EDITION USER MANUAL 8. When MioNet finds the My Book World Edition you are registering, enter a name for the device and click OK. 9. A confirmation message appears. Click OK. MioNet displays a list of the public folders stored on your My Book World Edition and includes a private folder
  • Western Digital WD20000H1NC | User Manual - Page 63
    more advanced options, see the MioNet Help or MioNet User Guide (available when you click the Online Help icon). Accessing My Book World Edition Folders and Files Remotely Important: Local access to WD Storage using MioNet Web is not available. Use Window's Explorer or Apple Finder. 1. Click the My
  • Western Digital WD20000H1NC | User Manual - Page 64
    MY BOOK WORLD EDITION USER MANUAL Your My Book World Edition folders display in the My Resources tab of MioNet any file to open it locally. You may be able to drag and drop files from your My Book World Edition to the remote computer and vice versa. Sharing Files with Others Sharing Photos You can
  • Western Digital WD20000H1NC | User Manual - Page 65
    MY BOOK WORLD EDITION USER MANUAL 2. Choose any folder or the plus sign to choose a sub folder to share with someone else and click the Next button. The screen for choosing people to share with appears. 3. To share photos with MioNet users you have shared with in the past: (a) Select the user(s)
  • Western Digital WD20000H1NC | User Manual - Page 66
    MY BOOK WORLD EDITION USER MANUAL 5. To find another MioNet user you have never shared with before: (a) Click the Find MioNet user button. (b) Enter the user name or e-mail address of the user and click the Find button. (c) When MioNet finds the user, click the Share with this person button. (d)
  • Western Digital WD20000H1NC | User Manual - Page 67
    BOOK WORLD EDITION USER MANUAL (e) Select the permission level and click the Finish button. If you want users to only view and download the photos, select Read permission. If you want to enable users to Others icon to open a dialog window showing your My Book World Edition folders. 2. Click the +
  • Western Digital WD20000H1NC | User Manual - Page 68
    The following screen appears. MY BOOK WORLD EDITION USER MANUAL 3. To transfer files back and forth with MioNet users you have shared with in the past: (a) Select the user(s) and click the Next button. (b) Continue with step 6. 4. To add a new user to transfer files to and from: (a) Click the
  • Western Digital WD20000H1NC | User Manual - Page 69
    MY BOOK WORLD EDITION USER MANUAL (c) When MioNet finds the user, click the Share with this person button. (d) Continue with step 6. 6. From the list of users, select the user(s) you want to transfer files to and from. Click the Next button. Note: You can press the Ctrl key in Windows or the Command
  • Western Digital WD20000H1NC | User Manual - Page 70
    center, game consoles (for example, Xbox 360™, PlayStation® 3, or DLNA® 1.5 Digital Media Adapters, such as WD TV™ Live HD Media Player). Visit www.twonkymedia.com for further information on TwonkyMedia. Media Types Supported Shared Music Shared Videos Shared Pictures Audio files Video files
  • Western Digital WD20000H1NC | User Manual - Page 71
    BOOK WORLD EDITION USER MANUAL The device comes pre-configured with the Public network share, which contains the following folders for media storage: • Shared Music - folder for storing music files you want to share with other users digital media adapter. HOW TO PLAY/STREAM VIDEO, MUSIC & PHOTOS - 65
  • Western Digital WD20000H1NC | User Manual - Page 72
    in this section: • Windows Media Player 11 (works with Windows Vista/Windows 7) on page 66. • Windows Media Player 12 (comes with Windows 7) on page 66. • WD TV Live HD Media Player on page 68. • Xbox 360 - New User Interface on page 68. • PlayStation 3 on page 71. • Digital Picture Frames on page
  • Western Digital WD20000H1NC | User Manual - Page 73
    3. Select Private, and then click the Next button. MY BOOK WORLD EDITION USER MANUAL 4. Launch Windows Media Player (Start>All Programs>Windows Media Player) 5. Click Library>Media Sharing. HOW TO PLAY/STREAM VIDEO, MUSIC & PHOTOS - 67
  • Western Digital WD20000H1NC | User Manual - Page 74
    Player user guide for more specific instructions on connecting to the My Book World Edition and accessing and playing your media content. 1. Connect My Book World Edition to your LAN and power on the device. 2. Make sure the WD TV Live is connected to your TV and powered on. 3. Connect the WD TV
  • Western Digital WD20000H1NC | User Manual - Page 75
    MY BOOK WORLD EDITION USER MANUAL 6. Select Automatic as the setup configuration option for DHCP or Manual for a static IP. 7. A confirmation screen displays your WD TV Live's network information if connection to the LAN is successful. Press Enter. 8. Navigate to the Home screen, and select the
  • Western Digital WD20000H1NC | User Manual - Page 76
    Note: Please go to the Microsoft Xbox 360 support site for more information on using and updating your XBox 360. 1. Ensure that your Xbox 360 and My Book World Edition are powered on and connected to your local area network. 2. From the main Xbox user interface, scroll to the My Xbox screen 3. Use
  • Western Digital WD20000H1NC | User Manual - Page 77
    photo frames: 1. Ensure that your My Book World Edition is connected to your home's local network and is powered on. 2. Follow the user instructions provided with your wireless digital photo frame to proceed through any initial setup or installation of drivers. 3. Using the navigation feature on
  • Western Digital WD20000H1NC | User Manual - Page 78
    player user guide for specific instructions on connecting to a network attached storage system and how to access and play your media content. Digital Media Adapters The following are general steps for using a Digital Media Adapter (DMA) to access to My Book World Edition: 1. Connect My Book World
  • Western Digital WD20000H1NC | User Manual - Page 79
    MY BOOK WORLD EDITION USER MANUAL 7 Using iTunes with My Book World Edition iTunes Media Server Overview With the iTunes Media Server, you or anyone connected to the My Book World Edition can use iTunes to play music files stored on it. This service creates a virtual music library on the device and
  • Western Digital WD20000H1NC | User Manual - Page 80
    3. Double-click an audio file to play. MY BOOK WORLD EDITION USER MANUAL The audio file is streamed in iTunes and audio files from the My Book World Edition are displayed under the Shared list. USING ITUNES WITH MY BOOK WORLD EDITION - 74
  • Western Digital WD20000H1NC | User Manual - Page 81
    MY BOOK WORLD EDITION USER MANUAL 8 Using WD Discovery (Windows only) WD Discovery is a proprietary utility that aids in connecting to WD network drives. The easy-to-use software enables you to quickly locate and set up the My Book World Edition from any Windows computer on your network. With WD
  • Western Digital WD20000H1NC | User Manual - Page 82
    MY BOOK WORLD EDITION USER MANUAL on your desktop. WD network drives are listed in the Network Drives Found list. 2. Click the device you want to map in the Network Drives Found list and click Map Network Drive in the Things to Do list. A message appears asking whether you want to map the drive
  • Western Digital WD20000H1NC | User Manual - Page 83
    browse network shares without having to manually enter network paths. 1. Ensure that the device is powered on and connected to the network. 2. Do one of the following: For Windows XP, click Start>All Programs>WD Discovery Software>WD Discovery or double-click the WD Discovery icon on your desktop
  • Western Digital WD20000H1NC | User Manual - Page 84
    MY BOOK WORLD EDITION USER MANUAL 4. After successful login, the share folders on the device are listed. Click a network share path to view and access share files in Windows Explorer. 5. Copy your music files into the Shared Music folder, your video files into the Shared Videos folder, and your
  • Western Digital WD20000H1NC | User Manual - Page 85
    MY BOOK WORLD EDITION USER MANUAL Desktop Shortcut Creation (Windows only) WD Discovery can create a desktop shortcut that points to a networked My Book World Edition. To create a desktop shortcut: 1. Ensure that the device is powered on and connected to the network. 2. For Windows XP, click Start>
  • Western Digital WD20000H1NC | User Manual - Page 86
    MY BOOK WORLD EDITION USER MANUAL Automatically Updating WD Discovery When you open WD Discovery, the WD Discovery Auto Update Progress screen may appear, notifying you that an update to WD Discovery is available. To download the update: 1. On the WD Discovery Auto Update Progress screen, click Yes.
  • Western Digital WD20000H1NC | User Manual - Page 87
    wait for the operating system to load. 2. Insert the software CD into the CD-ROM drive. Note: If AutoPlay is disabled on your computer, you must install the utilities manually. Go to Computer (Windows Vista/Windows7) or My Computer (Windows XP). Double-click Setup.exe in the root directory of the CD
  • Western Digital WD20000H1NC | User Manual - Page 88
    MY BOOK WORLD EDITION USER MANUAL 7. The WD Discovery screen displays. Click MyBookWorld in the Network Drives Found list and click Configure. 8. The login page appears. Continue device setup by following the instructions for "Setting Up the Device for the First Time" on page 83. Mac OS X 1. Turn on
  • Western Digital WD20000H1NC | User Manual - Page 89
    USER MANUAL Setting Up the Device for the First Time Follow the steps below to continue setting up the device on all operating systems. Note: You only have to perform this step the first time you log in to the My Book World Edition. 1. Enter "admin" in both the Administrator Name and Password
  • Western Digital WD20000H1NC | User Manual - Page 90
    MY BOOK WORLD EDITION USER MANUAL 5. In the Initial Setup page, do the following: (a) Enter a name in the Device Name field (up to 15 characters, including alphanumeric and dash '-'). Note: The device name is used to identify the storage device connected to the network. To connect more than one
  • Western Digital WD20000H1NC | User Manual - Page 91
    MY BOOK WORLD EDITION USER MANUAL 8. Retype the new password in the Confirm Password field. Click the Next button. Note: If you forget your admin password, you must reset the device to its default configuration using the reset button. See "Reset Button" on page 8 for instructions. 9. Do one of the
  • Western Digital WD20000H1NC | User Manual - Page 92
    begin using your My Book World Edition. Windows XP/Windows Vista/Windows 7 1. Ensure that the device is powered on and connected to the network. 2. If WD Discovery is not running: 3. For Windows XP click Start>All Programs>WD Discovery Software>WD Discovery, or double-click the WD Discovery icon on
  • Western Digital WD20000H1NC | User Manual - Page 93
    only. • Update via web-firmware updates can be downloaded and installed on the device from a computer on the LAN. • Disk management-the web-based user interface allows administrators to monitor internal hard drives and USB hard drives connected to the device. Support for file sharing-allows file
  • Western Digital WD20000H1NC | User Manual - Page 94
    MY BOOK WORLD EDITION USER MANUAL • RAID management (My Book World Edition II)-allows RAID configuring of the hard drives. • Support for Windows and Mac systems-allows users on different platforms to share files using CIFS (Common Internet File System), NFS (Network File System), FTP (File Transfer
  • Western Digital WD20000H1NC | User Manual - Page 95
    MY BOOK WORLD EDITION USER MANUAL The Advanced Mode home page includes six tabs, and each tab Advanced Mode" on page 101 for instructions on using Advanced Mode. Toolbar The toolbar located on the upper right of the Network Storage Manager user interface includes the following commands. Function
  • Western Digital WD20000H1NC | User Manual - Page 96
    change the user password. For more details, see "Users" on page 93. Folder Shares Access configuration details relating to how shares are made available through this storage device. This menu also displays a list of mounted volumes and their available shares. When a USB hard drive is connected to
  • Western Digital WD20000H1NC | User Manual - Page 97
    MY BOOK WORLD EDITION USER MANUAL 1. Click Device Name in the Basic Mode home page. 2. Enter or the NTP (network time protocol) server by default. You have the option to set the date and time manually or allow the NTP to access the Internet to automatically set the time. Note: Time displays in 24-
  • Western Digital WD20000H1NC | User Manual - Page 98
    Submit. button. MY BOOK WORLD EDITION USER MANUAL Network The device's network option is set to DHCP Client by default, which is appropriate for most environments. By selecting Static IP, you can manually set the IP address, netmask, gateway, and DNS (Domain Name Service) server IP address. To
  • Western Digital WD20000H1NC | User Manual - Page 99
    We recommend that you use the same user name and password as you use to log in to Windows. 3. Enter the user name in the User Name field. 4. Enter the user's full name in the Full Name field. 5. Enter the password in the Password field. Note: The password can contain up to 16 characters, including
  • Western Digital WD20000H1NC | User Manual - Page 100
    MY BOOK WORLD EDITION USER MANUAL 7. Create a private user share at the same time by clicking Yes next to Create User Private Share. The new user is granted full access to the private share. The private share name is the same as the user name. 8. Click the Submit button. To change a user password:
  • Western Digital WD20000H1NC | User Manual - Page 101
    MY BOOK WORLD EDITION USER MANUAL 3. Click OK. For more user configuration options using the Network Storage Manager Advanced Mode, see "Users" on page 140. Folder Shares Shares are folders that can be used to organize and store files on your My Book World Edition network storage system. Shares can
  • Western Digital WD20000H1NC | User Manual - Page 102
    MY BOOK WORLD EDITION USER MANUAL The Folder Shares menu provides access to a list of available shares. Folder Shares Page Icons Icon Description Private share disabled. Private share enabled. Click this
  • Western Digital WD20000H1NC | User Manual - Page 103
    To delete existing shares: MY BOOK WORLD EDITION USER MANUAL WARNING: Deleting a share erases all data on the system information. Remote Access My Book World Edition comes with MioNet enabled by default. The Remote Access button enables you to control the MioNet service on the storage device. If
  • Western Digital WD20000H1NC | User Manual - Page 104
    by MioNet or MioNet users remain, and no data is lost. Access to these shares over the LAN requires the use of the MioNet username and password. MioNet Service Status Messages • MioNet service connection status • Started - MioNet service is started • Stopped - MioNet service is stopped and will
  • Western Digital WD20000H1NC | User Manual - Page 105
    MY BOOK WORLD EDITION USER MANUAL To register with MioNet: 1. Click the Create MioNet account link in the note at the bottom of the : 1. Click the MioNet login link at the bottom of the page. 2. Enter your MioNet username and password and click the Go button. NETWORK STORAGE MANAGER: BASICS - 99
  • Western Digital WD20000H1NC | User Manual - Page 106
    MY BOOK WORLD EDITION USER MANUAL Shutdown/Reboot The Shutdown/Reboot button allows you to perform a system reboot or shutdown. To perform My Book World Edition shutdown: 1. Click Shutdown/Reboot in the Basic Mode home page. 2. On the Shutdown/Reboot page, click Shutdown. 3. Click OK. To perform My
  • Western Digital WD20000H1NC | User Manual - Page 107
    list of all supported drives on the system. It also allows you to configure the RAID capability of the hard drives (My Book World Edition II USB storage devices. For more details, see "Users Tab" on page 140. The Status tab displays general information about the system such as device name, firmware
  • Western Digital WD20000H1NC | User Manual - Page 108
    BOOK WORLD EDITION USER MANUAL System Tab The System tab allows you to set the system date and time, set up alerts, change the admin password, perform firmware date and time manually or enable automatic time synchronization via NTP (Network Time Protocol) Service. You can also manually specify the IP
  • Western Digital WD20000H1NC | User Manual - Page 109
    and time manually in the Date & Time lists. 7. Click the Submit button. Alerts Setup Using the Alerts Setup button on the System tab, you can configure e-mails or popup messages that provide alerts for system conditions, over temperature; hard drive, volume, network, and USB status; and user and
  • Western Digital WD20000H1NC | User Manual - Page 110
    MY BOOK WORLD EDITION USER MANUAL Note: E-mail alerts may not work with some ISPs using strong spam filtering. For further information, go to support.wdc.com and search the knowledge base for answer ID 2570. To set up automatic e-mail notifications: 1. On the Alerts Setup page on the System tab,
  • Western Digital WD20000H1NC | User Manual - Page 111
    6. Click the Submit button. MY BOOK WORLD EDITION USER MANUAL To configure alerts to send pop-up messages when an event occurs: Note: Pop-up notification only works with Windows XP. For a list of events, see "System Events" on page 177. 1. On the Alerts Setup page on the System tab, click Enable
  • Western Digital WD20000H1NC | User Manual - Page 112
    the Submit button MY BOOK WORLD EDITION USER MANUAL Admin Password The Admin Password button on the System tab allows you to change the administrator's password. To change the administrator's password: 1. Click the Admin Password button on the System tab. 2. In the Old Password field, enter the
  • Western Digital WD20000H1NC | User Manual - Page 113
    version and allows you to perform a firmware update either automatically or manually. Automated The Automated tab provides information about the current firmware version and connects to the WD website for automatic downloading of the latest firmware. 1. Click the Update button on the System tab
  • Western Digital WD20000H1NC | User Manual - Page 114
    user interface redirects to the System Information page after the update has completed. Manual The Manual page allows you to install the firmware manually. 1. Before attempting a manual update, check support.wdc.com for firmware availability. 2. If a new firmware file is available, obtain it from WD
  • Western Digital WD20000H1NC | User Manual - Page 115
    BOOK WORLD EDITION USER MANUAL 5. Under Firmware Update, click the Browse button and locate the firmware file you saved. 6. Click the Submit button. A page with a progress bar and a warning displays. WARNING! Do not interrupt a firmware firmware has been updated, the device reboots. The web user
  • Western Digital WD20000H1NC | User Manual - Page 116
    MY BOOK WORLD EDITION USER MANUAL Restore Configuration The Restore Configuration button on the System tab allows you to save or restore system configuration settings or revert to factory default settings. The single-drive My Book World Edition displays the following page: NETWORK STORAGE MANAGER:
  • Western Digital WD20000H1NC | User Manual - Page 117
    MY BOOK WORLD EDITION USER MANUAL The My Book World Edition II (2 drives) displays the following page, which has a Full Restore button: To back up the current system configuration settings: 1. On the Restore Configuration page, click Save Current Configuration. 2. Click Save. 3. Specify a file name
  • Western Digital WD20000H1NC | User Manual - Page 118
    these settings (including IP setting, device name, and administrator password) to factory default configuration. To use this function, press and hold the reset button on the back of the device (next to power interface) for at least 10 seconds. The system reboots automatically and you can then use
  • Western Digital WD20000H1NC | User Manual - Page 119
    MY BOOK WORLD EDITION USER MANUAL 1. On the Advanced page, select the Enable check box under Root Access. 2. Click the Submit button. To generate an SSL certificate and key pair automatically: Configure the system for a secure connection by generating a key and an SSL certificate automatically or
  • Western Digital WD20000H1NC | User Manual - Page 120
    pair manually: 1. Using your preferred method, generate an RSA private key and paste it in the appropriate fields on the Advanced page. 2. Click the Submit button. To disable HDD standby (enabled by default): If the HDD Standby function is enabled, the hard drives go into standby mode to save power
  • Western Digital WD20000H1NC | User Manual - Page 121
    WORLD EDITION USER MANUAL To reboot the My Book World Edition: 1. Click the Shutdown/Reboot button on the System tab home page. 2. On the Shutdown/Reboot page, click the Reboot button. 3. Click OK. Network Tab The Network tab provides access to the following configuration options: • LAN • Services
  • Western Digital WD20000H1NC | User Manual - Page 122
    BOOK WORLD EDITION USER MANUAL LAN The LAN button on the Network tab home page allows access to all network configuration options including setting the connection method, changing the IP address, netmask, gateway, and DNS (Domain Name Service support jumbo frame. Note: For the MTU size
  • Western Digital WD20000H1NC | User Manual - Page 123
    MY BOOK WORLD EDITION USER MANUAL Services The Services button on the Network tab home screen allows you to set protocols for sharing files and folders on the device. NETWORK STORAGE MANAGER: ADVANCED MODE - 117
  • Western Digital WD20000H1NC | User Manual - Page 124
    MY BOOK WORLD EDITION USER MANUAL • Universal Plug and Play (UPnP)-Set of computer network protocols that simplifies the implementation of networks in the home by allowing devices to connect seamlessly. • File Transfer Protocol (FTP)-Network protocol used to transfer data from one computer to
  • Western Digital WD20000H1NC | User Manual - Page 125
    FTP client software program you are using. Note: Click System Status in either the basic or Advanced Mode to view the device's IP address. 3. Enter the My Book World Edition user name and corresponding password. 4. Click the Connect or OK button. You can now upload files to or download files from
  • Western Digital WD20000H1NC | User Manual - Page 126
    MY BOOK WORLD EDITION USER MANUAL To set up a workgroup name: 1. Click the Workgroup button on the Network tab home page. 2. Click Workgroup as the Mode option. 3. Enter a name for your workgroup in the Workgroup Name field. 4. Click the Submit button. To join a domain (Windows 2003 Server only): 1.
  • Western Digital WD20000H1NC | User Manual - Page 127
    by MioNet or MioNet users remain, and no data is lost. Access to these shares over the LAN requires the use of the MioNet username and password. MioNet Service Status Messages • MioNet service connection status • Started - MioNet service is started • Stopped - MioNet service is stopped and will
  • Western Digital WD20000H1NC | User Manual - Page 128
    (My Book World Edition II only), set a share name, and format and safely remove the USB hard drives connected to the system. The Storage tab provides the following configuration options: • Disk Manager • Volumes & RAID Management • Folder Shares • USB Shares • Quota • Downloads NETWORK STORAGE
  • Western Digital WD20000H1NC | User Manual - Page 129
    MY BOOK WORLD EDITION USER MANUAL Disk Manager The Disk Manager button on the Storage tab home page displays the installed hard drives in the device. This page also displays detailed information about the hard drives, such as disk size, disk description, and status. Drive status messages include the
  • Western Digital WD20000H1NC | User Manual - Page 130
    MY BOOK WORLD EDITION USER MANUAL Volumes and RAID Management The Volumes and RAID Management button on the Storage tab home page provides one tab, Volume Status, for the My Book World Edition and two tabs, Manage Volume and Manage RAID, for the My Book World Edition II. Manage Volume (My Book World
  • Western Digital WD20000H1NC | User Manual - Page 131
    . Note: For My Book World Edition II, if the volume RAID type is JBOD and there are new disks in the system, the Extend icon appears on the side of the Manage Volume table. Volume status messages include the following: • Good-Indicates the volume is accessible and hard drive is functioning normally
  • Western Digital WD20000H1NC | User Manual - Page 132
    . RAID (Redundant Array of Independent Drives) refers to an array of multiple independent hard drives that provide high performance and reliability. RAID function depends on the number of drives present and the RAID level selected. The My Book World Edition supports the following RAID levels: • RAID
  • Western Digital WD20000H1NC | User Manual - Page 133
    To configure the Manage RAID tab: MY BOOK WORLD EDITION USER MANUAL Warning: Be sure to back up all data before configuring RAID. All data stored in the hard drive is lost when changing the RAID configuration. 1. Click the Manage RAID tab on the Volumes & Raid Management page. 2. Select a RAID
  • Western Digital WD20000H1NC | User Manual - Page 134
    MY BOOK WORLD EDITION USER MANUAL Manage RAID Options (My Book World Edition II) Any existing mode can be changed to any other available mode using the Manage RAID option. The following table provides the available modes and data availability for a My Book World Edition II with one drive after
  • Western Digital WD20000H1NC | User Manual - Page 135
    to organize and store files on your My Book World Edition. They can be shared with everyone (public) or with selected users on your network (private). The device comes preconfigured with three shares: • Public-created automatically after initial setup • Shared Music - folder for storing music files
  • Western Digital WD20000H1NC | User Manual - Page 136
    MY BOOK WORLD EDITION USER MANUAL The Folder Shares button on the Storage tab home page provides access to a list of available shares. USB share naming corresponds to the following configuration: usb1-share The port number is always "1" since My Book World Edition
  • Western Digital WD20000H1NC | User Manual - Page 137
    BOOK WORLD EDITION USER MANUAL 4. Click a file sharing protocol next to Services. The My Book World Edition supports the following file sharing services sharing protocol for Windows platform, and allows users to access shares through My Network Places. Mac OS X or later also supports the CIFS
  • Western Digital WD20000H1NC | User Manual - Page 138
    a USB drive. To format a USB drive: 1. Connect a USB drive to the device. Note: The My Book World Edition supports USB flash disk and external USB drives; USB optical drives (CD/DVD combo or DVD dual/multi drive) are not supported. For instructions on how to connect a USB drive to the My Book World
  • Western Digital WD20000H1NC | User Manual - Page 139
    MY BOOK WORLD EDITION USER MANUAL WARNING! Formatting hard drives erases all the disk contents, including partition tables, logical volumes, and all shared folders and subfolders and files. Perform this procedure only when it is safe to proceed. When formatting a USB drive, only one partition is
  • Western Digital WD20000H1NC | User Manual - Page 140
    tab to enable quota per user. To configure disk quota: 1. Select the volume you want to modify, and then click the Modify icon . 2. Click Enable next to Quota Service to enable disk quota service. 3. Specify the grace period after which no additional drive space is provided. 4. Click the Submit
  • Western Digital WD20000H1NC | User Manual - Page 141
    MY BOOK WORLD EDITION USER MANUAL DataVolume User Quota (or ExtendVolume User Quota) The DataVolume User Quota tab provides user quota information details and allows administrators to modify the user quota setting if two or more volumes are available. If a My Book World Edition II is set to JBOD,
  • Western Digital WD20000H1NC | User Manual - Page 142
    MY BOOK WORLD EDITION USER MANUAL Downloads The Downloads button on the Storage tab home page provides two tabs-Setup Destination Share and Change Password. They provide configuration options for selecting the Downloads destination share for scheduled downloads and changing the Downloader login
  • Western Digital WD20000H1NC | User Manual - Page 143
    3. Re-enter the password in the Confirm Password field. 4. Click the Submit button. MY BOOK WORLD EDITION USER MANUAL Media Tab The Media tab provides access to the iTunes and Media Server menus. Note: The Media Server and iTunes servers only work on the LAN. NETWORK STORAGE MANAGER: ADVANCED
  • Western Digital WD20000H1NC | User Manual - Page 144
    BOOK WORLD EDITION USER MANUAL The TwonkyMedia 5.1 server application searches for all the media (for example, videos, photos, and music) stored on the My Book World Edition connected the My Book World Edition to Windows or Mac computers running iTunes. The iTunes Server supports only the following
  • Western Digital WD20000H1NC | User Manual - Page 145
    BOOK WORLD EDITION USER MANUAL To enable or disable the iTunes Server: 1. On the iTunes server page, click Enable next to iTunes Service it is in a format supported by iTunes, it should Book World Edition are displayed under the Shared list. Note: Both the Media Server and the iTunes Server only work
  • Western Digital WD20000H1NC | User Manual - Page 146
    MY BOOK WORLD EDITION USER MANUAL Users Tab The Users tab provides access to the following configuration options: • Users • Groups • Folder Share Permissions • USB Share Permissions Users The Users button on the Users tab home page allows administrators to create, edit, and delete user accounts from
  • Western Digital WD20000H1NC | User Manual - Page 147
    Users page on the Users tab, click the Add icon following page: MY BOOK WORLD EDITION USER MANUAL to display the Note: The user name and password it is specifically granted by the administrator. 10. Select a volume that you want the user to access. (My Book World Edition II only) 11. Select one
  • Western Digital WD20000H1NC | User Manual - Page 148
    MY BOOK WORLD EDITION USER MANUAL To modify a user account: 1. On the Users page on the Users tab, select the user account to modify, and then click the Modify icon . 2. Make the desired changes, and then the Submit button. To delete an existing user account: 1. On the Users page on the Users tab,
  • Western Digital WD20000H1NC | User Manual - Page 149
    MY BOOK WORLD EDITION USER MANUAL 4. Select users from the User List field to add to the User Joined field. 5. Click the >> button. 6. Click the Submit button. To modify a group: 1. On the Groups page on the Users tab, select the group account you want to modify, and then click the Modify icon . 2.
  • Western Digital WD20000H1NC | User Manual - Page 150
    MY BOOK WORLD EDITION USER MANUAL To edit the access rights of users or groups: 1. Select a user or group on can be accessed using the administrator name and password as well as by a guest name and password. The default guest name and password are both "guest." NETWORK STORAGE MANAGER: ADVANCED
  • Western Digital WD20000H1NC | User Manual - Page 151
    MY BOOK WORLD EDITION USER MANUAL USB Share Permissions The USB Shares button on the User tab enables you to set access control for the two USB ports on the back of the device. The types of access control that you can assign to a user or group include: • Public • Full Access • Read Only • Deny
  • Western Digital WD20000H1NC | User Manual - Page 152
    MY BOOK WORLD EDITION USER MANUAL To edit the access rights of users or groups: 1. Select the share you want to modify by clicking the Edit icon next to that share. The following page appears if Public Access
  • Western Digital WD20000H1NC | User Manual - Page 153
    MY BOOK WORLD EDITION USER MANUAL 4. In the Unassigned Users list, select the users to whom you want to grant full access, read only permission, or no access to the share. 5. Click the >> button. 6. In the Unassigned Groups list,
  • Western Digital WD20000H1NC | User Manual - Page 154
    MY BOOK WORLD EDITION USER MANUAL System Logs The System Logs button on the Status tab home page displays the events recorded by the System Configuration utility. You can view information such as file and services requested on the device and requests between the device and client computers. You can
  • Western Digital WD20000H1NC | User Manual - Page 155
    sent to notify user of the problem that occurred in the system. • Information-An event that describes the successful operation of an application, driver, or service. CIFS The CIFS (Common Internet File System) subtab displays logs of file and services requested on the device for connections that use
  • Western Digital WD20000H1NC | User Manual - Page 156
    MY BOOK WORLD EDITION USER MANUAL FTP The FTP (File Transfer Protocol) subtab displays logs of the requests and records transferred between the device and client computers for connections that use this protocol. Settings The Settings subtab assigns the order and number of log entries that appear on
  • Western Digital WD20000H1NC | User Manual - Page 157
    system's web-based user interface. See "Accessing My Book World Edition's Network Storage Manager" on page 86 for instructions. 1. In the Tool list, click Downloader. 2. Enter "downloader" in both the Administrator Name and Password fields. Note: You can change the password, but the administrator
  • Western Digital WD20000H1NC | User Manual - Page 158
    MY BOOK WORLD EDITION USER MANUAL Downloader Features Downloader includes the following features: • Download faster with instantaneous "start" • Download multiple files from the Internet simultaneously • Automatically store files to a user-defined destination folder in My Book World Edition •
  • Western Digital WD20000H1NC | User Manual - Page 159
    the online guide. Exits the Downloader utility. To create a download task: 1. On the Tasks page, click the Add icon. 2. Enter the full web address from which you want to download the file in the URL field. 3. If a user name and password are required to download the file, click User name and
  • Western Digital WD20000H1NC | User Manual - Page 160
    MY BOOK WORLD EDITION USER MANUAL 5. Click Automatically to start downloading immediately after the request. 6. Click the Submit button. The task displays at the bottom of the list. Note: The Scheduled Status field above the table on the right indicates whether the download was scheduled. See "
  • Western Digital WD20000H1NC | User Manual - Page 161
    MY BOOK WORLD EDITION USER MANUAL To change the order of the download queue: 1. Use the arrow buttons to change the order of download tasks or to make a task conditional on a previous task. 2. Select a task in the Tasks table, and then click Move Up or Move Down . 3. Click the
  • Western Digital WD20000H1NC | User Manual - Page 162
    MY BOOK WORLD EDITION USER MANUAL 2. Select a number to specify the maximum number of simultaneously running downloads in the Max. Running No. field. 3. Specify the integer value to limit the downloaded speed if you do not want to consume the entire available bandwidth in the Download Speed field.
  • Western Digital WD20000H1NC | User Manual - Page 163
    MY BOOK WORLD EDITION USER MANUAL CTorrent Tab CTorrent can be used for downloading and uploading large files among peers without the strain on their computers normally experienced with standard Internet transfers. The person downloading the file receives pieces of the file from multiple people who
  • Western Digital WD20000H1NC | User Manual - Page 164
    MY BOOK WORLD EDITION USER MANUAL The Tasks page displays the following information about each torrent: • Torrent name • File size • Progress of download • Download speed (KB per second) • Upload speed (KB per second) • Up/Down Ratio (A percentage that represents the amount of data uploaded divided
  • Western Digital WD20000H1NC | User Manual - Page 165
    MY BOOK WORLD EDITION USER MANUAL • Progress of the download as a percentage • Download rate (KB/s) • Upload rate (KB/s) • The amount of data downloaded so far • The amount of data uploaded so far To view information about the individual files in the torrent: 1. On the Tasks page, click the
  • Western Digital WD20000H1NC | User Manual - Page 166
    MY BOOK WORLD EDITION USER MANUAL To create a task: Before adding a torrent, first locate it on the bottom of the task list. To delete a task: You can delete a download task, but the system does not delete it from the My Book World Edition data volume where it is stored. 1. Select the task on the
  • Western Digital WD20000H1NC | User Manual - Page 167
    BOOK WORLD EDITION USER MANUAL Settings The Settings button on the CTorrent tab enables you to customize the amount of bandwidth used by a torrent download. To customize CTorrent settings: 1. Click the Settings button on the CTorrent tab to display the following: 2. To set the speed of the download
  • Western Digital WD20000H1NC | User Manual - Page 168
    MY BOOK WORLD EDITION USER MANUAL Arrangement The Arrangement button on the CTorrent tab enables you to prioritize your downloads. The position of a torrent in the list determines its priority. 1. Click the Arrangement button on the CTorrent tab to display the following: 2. To change priority
  • Western Digital WD20000H1NC | User Manual - Page 169
    12 MY BOOK WORLD EDITION USER MANUAL Connecting and Managing a USB Hard Drive Connecting Connect a USB hard drive to the USB port on the rear of your My Book World Edition for additional storage. The USB drive appears as a Folder Share in Network Storage Manager. See "Folder Shares" on page 95 (
  • Western Digital WD20000H1NC | User Manual - Page 170
    's Network Storage Manager" on page 86 for instructions. 1. In the Tools list, click Copy Manager. 2. Enter the administrator name and password. The defaults are "admin" and "admin." 3. Select a language. ("English" is the default.) 4. Click Login. CONNECTING AND MANAGING A USB HARD DRIVE - 164
  • Western Digital WD20000H1NC | User Manual - Page 171
    folder in the Destination Folder Selection list or enter the path manually. You can also create a new folder by entering "/folder name" after browsing to the end. Note: You can only create new folders one level at a time. 5. Click the Next button. CONNECTING AND MANAGING A USB HARD DRIVE - 165
  • Western Digital WD20000H1NC | User Manual - Page 172
    on the source drive is be overwritten. USB-to-My Book World Edition Copy 1. Select USB as the source. 2. Browse to the source folder in the Source Folder Selection list or enter the path manually. Click the Next button. 3. Select NAS as the destination. CONNECTING AND MANAGING A USB HARD DRIVE - 166
  • Western Digital WD20000H1NC | User Manual - Page 173
    the destination folder in the Destination Folder Selection list or enter the path manually. Click the Next button. 5. Click the Start button. 6. Click OK. Any file on the destination drive with the same name as a file on the source drive is overwritten. CONNECTING AND MANAGING A USB HARD DRIVE - 167
  • Western Digital WD20000H1NC | User Manual - Page 174
    USER MANUAL 7. The copy operation begins. Click the Stop button if you wish to stop the copy. 8. Click OK. Copy Logs The Logs tab provides a record of all copy activities for the session. 1. To view a log of copy activities, click the Logs tab to display: CONNECTING AND MANAGING A USB HARD DRIVE
  • Western Digital WD20000H1NC | User Manual - Page 175
    WD Technical Support at support.wdc.com and search the knowledge base article 1709 for detailed instructions on obtaining a replacement drive. When contacting Technical Support, have the following items ready: My Book serial number, date of purchase, and the serial number of the internal hard drive
  • Western Digital WD20000H1NC | User Manual - Page 176
    MY BOOK WORLD EDITION USER MANUAL Before getting started, power off the unit and disconnect all of thumbscrew that secures the drive cover plate. Remove the drive cover plate and set aside. Note: Each drive is designated A or B by a color coded decal. REPLACING A DRIVE (MY BOOK WORLD EDITION II) -
  • Western Digital WD20000H1NC | User Manual - Page 177
    MY BOOK WORLD EDITION USER MANUAL 4. Locate the drive you wish to replace (A or B). Using the pull tab, carefully and slowly pull the drive assembly up and out of the enclosure and set aside. 5. Gently slide the replacement drive assembly into the drive slot until is fully inserted. 6. Replace the
  • Western Digital WD20000H1NC | User Manual - Page 178
    . Connect the interface cable. 12. Return the faulty drive following the instructions provided in the WD knowledge base article# 1709. Important: Do not disassemble the internal drive and attached assembly components. Return the entire internal drive assembly intact to WD. REPLACING A DRIVE (MY BOOK
  • Western Digital WD20000H1NC | User Manual - Page 179
    BOOK WORLD EDITION USER MANUAL Troubleshooting For any issue, first ensure that you are using the latest firmware for My Book World Edition. The latest firmware includes the latest network and SATA disk drivers. See "Update (Firmware)" on page 107 for instructions. First steps checklist • AC power
  • Western Digital WD20000H1NC | User Manual - Page 180
    may arise during the use of the My Book World Edition. Possible solutions are listed for each problem. LEDs do not light up. Do the following: • Make sure the power button on the rear of the device is turned on. • Make sure the power cord is connected correctly. • Make sure that the wall outlet has
  • Western Digital WD20000H1NC | User Manual - Page 181
    page 123. If the status of any drive is "Failed," visit WD Technical Support at support.wdc.com and search the knowledge base article 2569 for detailed instructions on obtaining a replacement drive. 2. If Disk Manager does not indicate that a hard drive has failed, power the device off and on. 3. If
  • Western Digital WD20000H1NC | User Manual - Page 182
    7. Click the Finish button. 8. Go back to the opening window of My Computer to view the public folder of your device under Network Drives. I want to install Windows drivers on my Windows Vista/Windows 7 computer without access to Windows update: 1. Insert the My Book World Edition CD and right-click
  • Western Digital WD20000H1NC | User Manual - Page 183
    BOOK WORLD EDITION USER MANUAL Depending on the digital media adapter device (for example, Xbox 360 or PlayStation 3) that you have, you may need to update your device with the proper CODECs to support the media format that you want to play. Please refer to your digital media adapter's user manual
  • Western Digital WD20000H1NC | User Manual - Page 184
    Volume has reached 95% capacity Volume has reached full capacity Volume had NOT been mounted MY BOOK WORLD EDITION USER MANUAL Critical Warning 9 9 9 9 9 Link Ok Link down Speed (Mbps: 1000/100/ 10) 9 Use dynamic IP address got from DHCP IP address Can not get IP address from DHCP
  • Western Digital WD20000H1NC | User Manual - Page 185
    Event type and ID Other events Volume [1,2] Volume [1,2] State Volume extend failed Volume resync failed Value MY BOOK WORLD EDITION USER MANUAL Critical Warning 9 9 9 9 TROUBLESHOOTING - 179
  • Western Digital WD20000H1NC | User Manual - Page 186
    MY BOOK WORLD EDITION USER MANUAL Glossary AFP - Apple Filing Protocol. The network protocol for sharing files and file services in an AppleTalk network. CTorrent - A computer program for downloading and uploading large files among peers without the strain on their computers normally experienced
  • Western Digital WD20000H1NC | User Manual - Page 187
    WD to bring more energy-efficient hard drive options to our customers. WD hard drives with GreenPower technology yield average power savings of 4-5 watts over competitors' drives while maintaining solid performance. Host - The computer to which other computers and peripherals connect. Host Adapter
  • Western Digital WD20000H1NC | User Manual - Page 188
    features. NTP - Network Time Protocol. A protocol for synchronizing the clocks of computers and equipment over a network. See also Protocol. Operating System - Software that allows users and programs installed on your system to communicate with computer hardware such as a hard drive. GLOSSARY - 182
  • Western Digital WD20000H1NC | User Manual - Page 189
    MY BOOK WORLD EDITION USER MANUAL Partition - A logical division on a hard drive that the operating system treats as a separate hard drive. Each partition is assigned a unique drive letter. Port (Hardware) - A specialized outlet on a device for connecting to other devices using a cable or a plug.
  • Western Digital WD20000H1NC | User Manual - Page 190
    WD backup software that allows the user to set up continuous backup of all or selected files for up to five computers in a network. This feature backs up your data to the My Book World Edition so you can restore your data in the event that a computer's hard drive crashes. WD Discovery™ - WD software
  • Western Digital WD20000H1NC | User Manual - Page 191
    in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. Any changes or modifications not expressly approved by WD could void the user's authority to operate
  • Western Digital WD20000H1NC | User Manual - Page 192
    MY BOOK WORLD EDITION USER MANUAL Warranty Information Obtaining Service WD values your business and always attempts to provide you the very best of service. If this Product requires maintenance, either contact the dealer from whom you originally purchased the Product or visit our product support
  • Western Digital WD20000H1NC | User Manual - Page 193
    . GNU General Public License ("GPL") Firmware incorporated into My Book World Edition includes third party copyrighted software licensed under the GPL ("GPL Software"). In accordance with the GPL: 1) the source code for the GPL Software may be obtained at support.wdc.com/ download/gpl; 2) you may re
  • Western Digital WD20000H1NC | User Manual - Page 194
    order of 155 download task, create 153 Downloader 151 access 151 change password 136 command icons 153 MY BOOK WORLD EDITION USER MANUAL configure settings 155 destination share setup 136 features 152 HTTP/FTP 152 torrents 157 downloads menu 136 drive format 3 replacement 169 E e-mail notifications
  • Western Digital WD20000H1NC | User Manual - Page 195
    Network Storage Manager 87 install WD Anywhere Backup 25 Leopard/Snow Leopard, access My Book World Edition 19 Tiger, access My Book World Edition 20 manage RAID 124 manage RAID options 128 manage volume 125 mapping a drive manually 77 media devices 66, 72 digital adapters 72 iTunes 138 storage
  • Western Digital WD20000H1NC | User Manual - Page 196
    and alerts 175 resetting the system 173 TwonkyMedia server 138 U Underwriters Laboratories Inc. (UL) 185 updating firmware 107 WD Discovery 80 UPnP NAT Traversal 118 USB hard drive connect and manage 163 Copy Manager 163 disconnect 133 format 132 USB share permissions 145 user account assign
  • Western Digital WD20000H1NC | User Manual - Page 197
    124, 125 W warranty 186 WD Anywhere Backup 23 WD Discovery browse network shares 77 desktop shortcut creation 79 mapping a network drive 75 updating 80 WD TV Live HD Media Player 68 Windows 7 Rally 15 Windows, configuring MioNet 54 workgroup setup 120 MY BOOK WORLD EDITION USER MANUAL INDEX - 191
  • Western Digital WD20000H1NC | User Manual - Page 198
    . No license is granted by implication or otherwise under any patent or patent rights of WD. WD reserves the right to change specifications at any time without notice. Western Digital, WD, the WD logo, My Book, WD Caviar and MioNet are registered trademarks in the U.S. and other countries; and World
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
My Book
World Edition
User Manual
®
™
Single and Dual-drive
Network Storage Systems