Westinghouse MT80A TILT Installation Instructions
Westinghouse MT80A TILT Manual
 |
View all Westinghouse MT80A TILT manuals
Add to My Manuals
Save this manual to your list of manuals |
Westinghouse MT80A TILT manual content summary:
- Westinghouse MT80A TILT | Installation Instructions - Page 1
Installation and Assembly: Universal Tilt Wall Mount for 15" - 37" Screens Model: MT80A TILT Features: • Fits 15" to 37" flat panel screens • One-touch tilt for effortless positioning and adjustment of the screen Visit the Westinghouse Web Site at www.westinghousedigital.com This product is - Westinghouse MT80A TILT | Installation Instructions - Page 2
Sheet. If you have any questions regarding any of the instructions or warnings, please call customer care at 1-866-287-5555. • This product should only be installed by a qualified professional. • Make sure that the wall will safely support the combined load of the equipment and all attached hardware - Westinghouse MT80A TILT | Installation Instructions - Page 3
Parts List Description A adapter plate B tilt assembly C Alligator® anchor D M4 x 10 mm phillips screw E M4 x 20 mm phillips screw F retaining spacer G #14 x 2-1/2" hex head wood screw H M5 x 6 mm screw Qty Part # 1 - Westinghouse MT80A TILT | Installation Instructions - Page 4
to Single Wood Stud Wall WARNING • Make sure that the wall will safely support the combined load of line down the stud's center. Place tilt assembly (B) on wall as a template, making sure that the two mounting holes are over the stud centerline. Level tilt assembly, and mark the center of - Westinghouse MT80A TILT | Installation Instructions - Page 5
may not hold concrete anchor. • Make sure that the wall will safely support the combined load of the equipment and all attached hardware and components. 1 Make sure that tilt assembly (B) is level, use it as a template to mark two mounting holes. Drill two 1/4" (6 mm) dia. holes to a minimum - Westinghouse MT80A TILT | Installation Instructions - Page 6
inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. 2 FOR VESA® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapter plate (A) to back of screen using four M4 x 10 mm screws (D) as shown below. *Note: If - Westinghouse MT80A TILT | Installation Instructions - Page 7
knob to desired tension to balance your screen size and weight, and reattach screen to mount as stated in step 3. Push or pull from top or bottom of screen to adjust tilt as shown in figure 4. The tilt can be adjusted to a maximum of 15° forward or 5° backward. CAUTION • Do not tighten screws - Westinghouse MT80A TILT | Installation Instructions - Page 8
-users of this Westinghouse display mounting product (the " service or repairs by anyone other than personnel authorized by Westinghouse Digital Electronics, (b) the failure to utilize proper packing when returning the product, (c) improper installation or the failure to follow Product instructions
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Max UL Load Capacity: 80 lb (36.3 kg)
ISSUED: 01-17-06
SHEET #: 202-9091-1
Features:
• Fits 15" to 37" flat panel screens
• One-touch tilt for effortless positioning and adjustment of the screen
Installation and Assembly:
Universal Tilt Wall Mount for 15" - 37" Screens
Model:
MT80A TILT
±
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
Visit the Westinghouse Web Site at
www.westinghousedigital.com
For customer care call 1-866-287-5555.