Whirlpool 4396841 Installation Instructions
Whirlpool 4396841 Manual
View all Whirlpool 4396841 manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool 4396841 manual content summary:
- Whirlpool 4396841 | Installation Instructions - Page 1
Water Filter Installation Instructions TM Follow these simple instructions for your filter type. Refrigerator Water Filter 3 Part 4396841, 4396710 & W10193691 1. Locate the filter beneath the freezer door in the front base grill. 2. Push the button firmly until the filter pops out. Note: there may
Water Filter Installation Instructions
Follow these simple instructions for your filter type.
Refrigerator Water Filter 3
1. Locate the filter beneath the freezer door in the front base grill.
2. Push the button firmly until the filter pops out. Note: there may be some water
in the filter and some spilling may occur.
3. Remove the cap from the filter by twisting counter clockwise.
4. Reinstall the new cap on the new filter and remove the cap from the filter prongs
5. Insert the new filter in the refrigerator and push in firmly until it clicks in place
6. Reduce water spurts by flushing air from the system. Run water continuously
for 4 gallons (approximately 5 minutes) through the dispenser until water runs
steady. Additional flushing may be required in some households where water
is of poor quality.
Part 4396841, 4396710 & W10193691
Phone:
US: 1-866-698-2538
Hours of operation:
Monday – Friday 8:00 AM – 8:00 PM EST