Whirlpool EL88TRRWS Dimension Guide

All Refrigerator

PRODUCT MODEL NUMBERS

PRODUCT DIMENSIONS

LOCATION REQUIREMENTS

EL88TRRW

Electrical:

A 115-volt, 60-Hz, AC-only, 15-

or 20-amp fused, grounded electrical supply

is required. It is recommended that a

separate circuit serving only your refrigerator

be provided. Use an outlet that cannot be

turned off by a switch. Do not use an

extension cord.

NOTE:

Before performing any type of

installation, cleaning, or removing a light

bulb, turn the control (Thermostat,

Refrigerator or Freezer Control depending on

the model) to OFF and then disconnect the

refrigerator from the electrical source. When

you are finished, reconnect the refrigerator to

the electrical source and reset the control

(Thermostat, Refrigerator or Freezer Control

depending on the model) to the desired

setting. See “Using the Controls.”

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10326802A

5/17/10

This refrigerator may be installed side by side with another refrigerator or

freezer. Allow at least 1" (2.54 cm) between back of cabinet and the wall.

If you are installing your refrigerator next to a fixed wall, leave extra space on

the hinge side to allow for the door to swing open.

NOTE:

It is recommended that you do not install the refrigerator near an oven,

radiator, or other heat source, nor in a location where the temperature will fall

below 55°F (13°C).

4

A

overall

C

not incl.

handle

B