Whirlpool GH5184XPT Installation Instructions
Whirlpool GH5184XPT Manual
 |
View all Whirlpool GH5184XPT manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool GH5184XPT manual content summary:
- Whirlpool GH5184XPT | Installation Instructions - Page 1
These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration in these installation instructions. Table of Contents MICROWAVE HOOD COMBINATION SAFETY 1 INSTALLATIONREQUIREMENTS 2. Tools and Parts 2.. Location Requirements - Whirlpool GH5184XPT | Installation Instructions - Page 2
Tools Needed Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. • cabinet opening. Support for weight of 150 Ibs (68 kg), which includes microwave oven and items placed inside the microwave oven and upper - Whirlpool GH5184XPT | Installation Instructions - Page 3
breaker. Recommended: • A time-delay fuse or time-delay circuit breaker. • A separate circuit serving only this microwave oven. GROUNDING iNSTRUCTiONS [] For all cord connected appliances: The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of - Whirlpool GH5184XPT | Installation Instructions - Page 4
Remove the mounting plate by peeling off the strips of tape that attach it to the back of the microwave oven, and set the mounting plate aside. \ _ _ i._i , _ _ _. %_ The microwave oven is set for recirculation installation. For wall or roof venting, changes must be made to the venting system - Whirlpool GH5184XPT | Installation Instructions - Page 5
so that deflector feet face the bottom of the microwave oven, and then slide air deflector into the back of the microwave oven as shown, making sure its exhaust port (open end) aligns with the microwave oven exhaust port. A c A. Microwave oven exhaust port B. Air deflector exhaust port (open end - Whirlpool GH5184XPT | Installation Instructions - Page 6
no wall studs exist within the cabinet opening, do not install the microwave oven. See illustrations in "Possible Wall Stud Configurations." 1. Using a stud plate) B. Cabinet opening vertical centerline C. Wall stud centerlines D. Holes for lag screws E. Support tabs F. Mounting plate center markers - Whirlpool GH5184XPT | Installation Instructions - Page 7
The microwave oven must be installed on a minimum of 1 wall stud, preferably 2, using a minimum of 1 lag cabinet bottom I f 4" (10.2cm) %" (1 cm) I A. Centerline 2. With the support tabs facing forward (see illustrations in "Possible Wall Stud Configurations" in "Locate Wall Stud(s)" section - Whirlpool GH5184XPT | Installation Instructions - Page 8
least 1 wall stud as well as at both bottom corners. 1. With the support tabs of the mounting plate facing forward, insert 1/4-20 x 3" round-head cut into the upper cabinet align with the holes in the top of the microwave oven. B ////// %1?// // A. 1/4-20 x 3" round-head bolt B. Mounting - Whirlpool GH5184XPT | Installation Instructions - Page 9
ILA B A. Mounting plate B. Support tabs 4= With front of microwave oven still tilted, thread power supply cord through the power supply cord hole in the bottom of the upper cabinet. Excessive Weight Hazard Use two or more people to move and install microwave oven. Failure to do so can result in - Whirlpool GH5184XPT | Installation Instructions - Page 10
fuse or reset the circuit breaker. If the problem continues, call an electrician. Check that the power supply cord is plugged into a grounded 3 prong outlet. See the Use and Care Guide for troubleshooting information. Installation is now complete. Save Installation Instructions for future use. 10 - Whirlpool GH5184XPT | Installation Instructions - Page 11
roof, and rectangular to round transition is used, be sure there is at least 3" (7.6 cm) of clearance between the top of the microwave oven and the transition piece. See "Rectangular to Round Transition" illustration. f A. Roof cap B. 6" (15.2 cm) min. diameter round vent C. Elbow (for wall venting - Whirlpool GH5184XPT | Installation Instructions - Page 12
your authorized dealer or service center. When you call, you will need the microwave oven model number and serial number. Both numbers can be found on the model and serial number plate, which is located behind the microwave oven door on the front frame of the microwave oven. If you need additional
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
MICROWAVE HOOD COMBINATION
INSTALLATIONINSTRUCTIONS
This product
is suitable for use above electric or gas cooking
products
up to 36" (91.4 cm) wide.
These installation
instructions
cover different models. The appearance
of your particular
model may differ slightly from the
illustration
in these installation
instructions.
Table of
Contents
MICROWAVE HOOD COMBINATION
SAFETY
..............................
1
INSTALLATIONREQUIREMENTS
...................................................
2
Tools and Parts
...............................................................................
2
Location Requirements
...................................................................
2
Product Dimensions
.......................................................................
3
Electrical Requirements
..................................................................
3
INSTALLATION INSTRUCTIONS
.....................................................
4
Remove Mounting Plate
.................................................................
4
Rotate Air Deflector
.........................................................................
4
Locate Wall Stud(s)
.........................................................................
6
Mark RearWall
................................................................................
7
Drill Holes in RearWall
....................................................................
7
Attach Mounting Plate to Wall
........................................................
8
Prepare Upper Cabinet
...................................................................
8
Install the Microwave Oven
............................................................
9
Complete Installation
....................................................................
10
VENTING DESIGN SPECIFICATIONS
............................................
11
ASSISTANCE
...................................................................................
12
Replacement Parts
.......................................................................
12
Accessories
...................................................................................
12
MICROWAVE HOOD COMBINATION
SAFETY
Your
safety
and
the safety
of others
are very
important.
We have provided
many important
safety messages
in this manual and on your appliance.
Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol
alerts you to potential
hazards that can kill or hurt you and others.
All safety
messages
will follow the safety alert symbol and either the word "DANGER"
or "WARNING."
These words mean:
You can be killed or seriously
injured if you don't immediately
follow
instructions.
You can be killed or seriously
injured
if you don't
follow
instructions.
All safety messages
will tell you what the potential
hazard is, tell you how to reduce the chance
of injury, and tell you what can
happen
if the instructions
are not followed.
8206579