Whirlpool GH7208XRY Installation Instructions
Whirlpool GH7208XRY Manual
 |
View all Whirlpool GH7208XRY manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool GH7208XRY manual content summary:
- Whirlpool GH7208XRY | Installation Instructions - Page 1
HOOD COMBINATION SAFETY 1 INSTALLATION REQUIREMENTS 2 Tools and Parts 2 Location Requirements 2 Product Dimensions 3 Electrical Requirements 3 INSTALLATION INSTRUCTIONS 4 Remove Mounting Plate 4 Convert Microwave Oven to External Venting 4 Locate Wall Stud(s 6 Mark Rear Wall 7 Drill - Whirlpool GH7208XRY | Installation Instructions - Page 2
The microwave oven is set for recirculation installation. For external (wall or roof) venting, see "Venting Design Specifications" section. Tools and Parts Tools Needed Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed - Whirlpool GH7208XRY | Installation Instructions - Page 3
(167.6 cm) installation height. Exact dimension may vary depending on type of range/cooktop below. Product Dimensions (4168.4¹⁄₄c"m) 29⁷⁄₈" (76.0 cm) 18¹⁄₄" ( circuit serving only this microwave oven. GROUNDING INSTRUCTIONS ■ For all cord connected appliances: The microwave oven must be grounded. - Whirlpool GH7208XRY | Installation Instructions - Page 4
and set it aside. 3. Tape the microwave oven door closed so that door does not swing open while the microwave oven is being handled. NOTE: To avoid damage to the microwave oven, do not grip or use the door or door handle while the microwave oven is being handled. 2. With vent deflector oriented as - Whirlpool GH7208XRY | Installation Instructions - Page 5
on the right side of the damper vent opening, as shown. Then secure with mounting screw. A B C D A. Diagonal wire cutting pliers B. Top of microwave oven C. Roof damper vent cover D. Perforations 3. Save the cover for possible change of venting method in the future. NOTE: Do not install damper - Whirlpool GH7208XRY | Installation Instructions - Page 6
wall studs exist within the cabinet opening, do not install the microwave oven. 1. Using a stud finder, locate the edges of the Corner holes (on mounting plate) B. Cabinet opening vertical centerline C. Wall stud centerlines D. Holes for lag screws E. Support tabs F. Mounting plate center markers 6 - Whirlpool GH7208XRY | Installation Instructions - Page 7
Mark Rear Wall The microwave oven must be installed on a minimum of 1 wall stud, preferably 2, using a minimum of 1 lag screw, preferably 2. 1. Using measuring tape, find and clearly mark the vertical centerline of the opening. A A. Centerline 2. With the support tabs facing forward (see - Whirlpool GH7208XRY | Installation Instructions - Page 8
Wall Stud at One Corner Hole (Figure 3) 1. With the support tabs of the mounting plate facing forward, insert a 1/4-20 guides. ■ If the wall behind the microwave oven (as installed) has a partial wall covering (for example, tile backsplash), be sure the "Rear Wall" arrows align to the thickest part - Whirlpool GH7208XRY | Installation Instructions - Page 9
2 or more people, lift microwave oven and hang it on support tabs at the bottom of mounting plate. NOTE: To avoid damage to the microwave oven, do not grip or use the door or door handle while the microwave oven is being handled. 4. With front of microwave oven still tilted, thread power supply - Whirlpool GH7208XRY | Installation Instructions - Page 10
an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Plug microwave oven into grounded 3 prong outlet. 2. Reconnect power. 3. Check the operation of microwave oven by placing 1 cup (250 mL) of water on the turntable, and - Whirlpool GH7208XRY | Installation Instructions - Page 11
, and rectangular to round transition is used, be sure there is at least 3" (7.6 cm) of clearance between the top of the microwave oven and the transition piece. See "Rectangular to Round Transition" illustration. Rectangular to Round Transition NOTE: The minimum 3" (7.6 cm) clearance must exist - Whirlpool GH7208XRY | Installation Instructions - Page 12
to be replaced, call us at our toll free number listed in the User Instructions. Following is a list of available replacement parts. You will need your model number located on the front facing of the microwave oven opening, behind the door. ■ Damper Assembly ■ Mounting Plate ■ Upper Cabinet Template
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
MICROWAVE HOOD COMBINATION
INSTALLATION INSTRUCTIONS
MICROWAVE HOOD COMBINATION SAFETY
This product is suitable for use above electric or gas cooking products up to 36" (91.4 cm) wide.
These installation instructions cover different models. The appearance of your particular model may differ slightly from the
illustration in these installation instructions.
Table of Contents
MICROWAVE HOOD COMBINATION SAFETY
..............................
1
INSTALLATION REQUIREMENTS
...................................................
2
Tools and Parts
...............................................................................
2
Location Requirements
...................................................................
2
Product Dimensions
.......................................................................
3
Electrical Requirements
..................................................................
3
INSTALLATION INSTRUCTIONS
.....................................................
4
Remove Mounting Plate
.................................................................
4
Convert Microwave Oven to External Venting
...............................
4
Locate Wall Stud(s)
.........................................................................
6
Mark Rear Wall
................................................................................
7
Drill Holes in Rear Wall
....................................................................
7
Attach Mounting Plate to Wall
........................................................
7
Prepare Upper Cabinet
...................................................................
8
Install the Microwave Oven
............................................................
9
Install Filters
..................................................................................
10
Complete Installation
....................................................................
10
VENTING DESIGN SPECIFICATIONS
............................................
11
ASSISTANCE
...................................................................................
12
Replacement Parts
.......................................................................
12
Accessories
...................................................................................
12
W10247293B
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING