Whirlpool RBS275PRS Dimensions

Whirlpool RBS275PRS Manual

Get Whirlpool RBS275PRS PDF manuals and user guides View all Whirlpool RBS275PRS manuals
Add to My Manuals
Save this manual to your list of manuals

Whirlpool RBS275PRS manual content summary:

  • Whirlpool RBS275PRS | Dimensions - Page 1
    , it is recommended that the junction boxes for oven and cooktop be located in the adjacent right or left cabinet. A 1" (2.5 cm) minimum diameter hole should have been drilled in the upper rear right or left corner of the side wall surface to pass the appliance cable through to the junction box. On
  • Whirlpool RBS275PRS | Dimensions - Page 2
    CUTOUT DIMENSIONS Oven Size 24" (61 cm) 27" (68.6 cm) 30" (76.2 cm) 36" (91.4 cm) Oven Cutout oven be located in the adjacent right or left cabinet. A 1" (2.5 cm) minimum diameter hole should have been drilled in the upper rear right or left corner of the side wall surface to pass the appliance
  • Whirlpool RBS275PRS | Dimensions - Page 3
    I'ouverture a decouper, voir les "Instructions d'installation de la table de cuisson d_coupet: OUVERTURE A DI_COUPER - DIMENSIONS Taille du four 24" (61 cm) 27" (68,6 cm) 30" (76,2 cm) 36" (91,4 cm) ieur arriere gauche ou droit de la surface de support pour le passage du c&ble d'alimentation de
  • Whirlpool RBS275PRS | Dimensions - Page 4
    de I'ouverture b d_coupet: OUVERTURE A DC:COUPER - DIMENSIONS Taille du four 24" (61 cm) 27" (68,6 cm) 30" (76,2 cm) 36" (91,4 cm) Ouverture a d_couper pour darts I'angle superieur arriere gauche ou droit de la surface de support pour le passage du c_ble d'alimentation de I'appareil jusqu'au
  • 1
  • 2
  • 3
  • 4
CUTOUTDIMENSIONSFOROVENSINSTALLEDUNDERCOOKTOP
IMPORTANT:
Observe all governing
codes and ordinances.
Cooktop
must be approved
for use over an oven. See Cooktop
Installation
Instructions
for cutout
dimensions.
Center the cooktop
cutout
over oven cutout.
To avoid damage
to your cabinets,
check with your builder
or cabinet
supplier
to make sure that the materials
used will not discolor,
delaminate
or sustain other damage.
This oven has been designed
in accordance
with
UL and CSA International
and complies
with the
maximum
allowable
wood
cabinet
temperatures
of 194°F (90°C).
G
I
L
....
D_
C,
=
\
\
A. 24" (61 cm) cabinet
depth
B. 25" (63.5 cm) countertop
depth
C. Recommended
oven and cooktop
junction
box locations
D. Allow
%"
(!.6
cm)
for oven to overlap each side.
E. 273/4" (70.5
cm)
minimum
cutout
height
F. 36" (91.4 cm) from
cabinet
base to countertop
G. 4%" (! 1.7
cm)
from floor
H. See Cutout
Dimensions
chart.
CUTOUT
DIMENSIONS
Oven Size
24" (61 cm)
27" (68.6 cm)
30" (76.2 cm)
36" (91.4 cm)
Oven Cutout
Dimension
221/2
'' (57.2 cm)
251/2
'' (64.8 cm)
281/2
'' (72.4 cm)
341/2
'' (87.6 cm)
For the approved
model number
combinations
refer to
the
undercounter
label located
on
top
of
the oven
chassis
and on the
bottom
of the cooktop
burner
box.
NOTE:
For undercounter
installation,
it is recommended
that the junction
boxes for oven and cooktop
be located
in the adjacent
right or
left cabinet.
A 1" (2.5 cm) minimum
diameter
hole should
have been drilled in the upper rear right or left corner
of the side wall surface
to pass the appliance
cable
through
to the junction
box. On models
with Steam-Assist,
it will be necessary
to drill a 1/2"(1.3 cm)
minimum
diameter
hole in the upper right or left rear corner
of the side wall to pass the water supply
tubing
through
to the undersink
water filter. If water supply
tubing
hole is drilled on the same side as the oven cable hole, a minimum
of 2" (5.1 cm) is required between
the 2 holes.
8304571A